main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tlv3011bidbvr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tlv3011bidbvr-etched.glb Publish 0.1.0 · Ray
tlv3011bidbvr-etched.step tlv3011bidbvr: factory component page (tier=mfr) · Ray
tlv3011bidbvr-hero.glb tlv3011bidbvr: hero GLB from the etched model (keeps the MPN mark) · Ray
tlv3011bidbvr-hero.overlay.json Publish 0.1.0 · Ray
tlv3011bidbvr.glb Publish 0.1.0 · Ray
tlv3011bidbvr.kicad_mod Publish 0.1.0 · Ray
tlv3011bidbvr.kicad_sym Publish 0.1.0 · Ray
tlv3011bidbvr.lbr Publish 0.1.0 · Ray
tlv3011bidbvr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

TLV3011BIDBVR

Texas Instruments · Comparators · SOT-23-6

TLV3011BIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Comparator output; on the TLV3011B this is an open-drain output that may be pulled up to any voltage up to 5.5 V regardless of the supply voltage.
2 V- power_in Negative (lowest) power supply; supply voltage VS = (V+) - (V-) must be 1.65 V to 5.5 V for the B versions.
3 IN+ input Non-inverting comparator input; recommended input voltage range is (V-) - 0.2 V to (V+) + 0.2 V.
4 IN- input Inverting comparator input; recommended input voltage range is (V-) - 0.2 V to (V+) + 0.2 V.
5 REF output Reference output of the integrated 1.242 V reference, stable with up to 10 nF capacitive load and able to source or sink up to 0.5 mA (typical).
6 V+ power_in Positive (highest) power supply; supply voltage VS = (V+) - (V-) must be 1.65 V to 5.5 V for the B versions.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VS -0.5 7 V VS = (V+), (V-) 4
Input pins voltage (absolute maximum) -0.5 7 V IN+, IN- from (V-) 4
Output voltage, open-drain (absolute maximum) -0.5 7 V OUT (open-drain) from (V-) 4
Output short circuit current 10 mA Short-circuit to (V-) or (V+) 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage B-versions (recommended) VS 1.65 5.5 V VS = (V+), (V-), B-versions 5
Input voltage range -0.2 V From (V-); maximum is (V+) + 0.2 V 5
Output voltage range, open-drain B-versions -0.2 5.5 V From (V-), open-drain, B-versions 5
Ambient temperature TA -40 125 °C 5
Junction-to-ambient thermal resistance RθJA 162.5 °C/W TLV3011B, TLV3012B, DBV (SOT-23) 6 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 78.8 °C/W TLV3011B, TLV3012B, DBV (SOT-23) 6 pins 5
Junction-to-board thermal resistance RθJB 42.1 °C/W TLV3011B, TLV3012B, DBV (SOT-23) 6 pins 5
Junction-to-top characterization parameter ψJT 21.2 °C/W TLV3011B, TLV3012B, DBV (SOT-23) 6 pins 5
Junction-to-board characterization parameter ψJB 41.9 °C/W TLV3011B, TLV3012B, DBV (SOT-23) 6 pins 5
Input offset voltage VOS -6 0.3 6 mV VCM = (V-) 8
Input offset voltage over temperature VOS -9 9 mV VCM = (V-), TA = -40°C to +125°C 8
Input offset voltage drift dVIO/dT -12 12 µV/°C VCM = (V-), TA = -40°C to +125°C 8
Power supply rejection ratio PSRR 100 1000 µV/V VCM = (V-), VS = 1.65 V to 5.5 V, TA = -40°C to +125°C 8
Input hysteresis voltage VHYS 2 6 8 mV TA = -40°C to +125°C 8
Input bias current IB -10 4.5 10 pA VCM = VS /2 8
Input offset current IOS -10 1 10 pA VCM = VS /2 8
Common-mode voltage range VCM-Range -0.2 0.2 V Min = (V-), 0.2 V, max = (V+) + 0.2 V; VS = 1.8 V to 5.5 V 8
Common mode rejection ratio (wide range) CMRR 60 74 dB VCM = (V-) + 1.5 V to (V+) + 0.2 V, VS = 5.5 V 8
Common mode rejection ratio (full range) CMRR 54 62 dB VCM = (V-), 0.2 V to (V+) + 0.2 V, VS = 5.5 V 8
Output low voltage swing from (V-) VOL 160 200 mV VS = 5 V, ISINK = 5 mA, TA = -40°C to +125°C 8
Reference voltage VOUT 1.223 1.242 1.26 V 8
Reference accuracy -0.25 0.25 % 8
Reference accuracy -1.5 1.5 % 8
Reference temperature drift dVOUT/dT 40 100 ppm/℃ TA = -40°C to +125°C 8
Reference load regulation, sourcing dVOUT/dILOAD 0.36 1 mV/mA 0 mA < ISOURCE ≤ 0.5 mA 8
Reference load regulation, sinking dVOUT/dILOAD 6.6 mV/mA 0 mA < ISINK ≤ 0.5 mA 8
Reference line regulation dVOUT/dVS 10 100 µV/V 1.65 V ≤ VS ≤ 5.5 V 8
Quiescent current per comparator IQ 2.4 3.1 µA Output is logic high 9
Quiescent current per comparator over temperature IQ 3.6 µA Output is logic high, TA = -40°C to +125°C 9
Power-on time tON 1.9 ms 10

CAD (KiCad official)

  • Symbol: TLV3011BIDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tlv3011bidbvr-etched.step / tlv3011bidbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv3011bidbvr.step / tlv3011bidbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 02993c016420887e, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF