Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPP60308-ES1R-S

3PEAK(思瑞浦) · DC-DC Converters · ESOP-8

TPP60308-ES1R-S from 3PEAK(思瑞浦), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT input Bootstrap capacitor connects between BOOT and SW; the datasheet recommends a 0.1-µF ceramic capacitor rated 10 V or higher, and BOOT−SW is limited to 6.5 V absolute maximum.
2 VIN power_in Supply voltage input with a 4.5-V to 60-V operating range (absolute maximum −0.3 V to 65 V).
3 EN input Device enable with an internal pull-up current source; the threshold (1.2 V typical) can be raised with external resistors for UVLO, and the absolute maximum is 8.4 V.
4 RT/CLK input Sets the switching frequency through a resistor to GND in free-running mode, or acts as a high-impedance clock input for the internal PLL when synchronized to an external clock; the absolute maximum is 3 V.
5 FB input Feedback input to the inverting input of the gm error amplifier, referenced to the 0.8-V internal reference (0.788 V to 0.812 V); the absolute maximum is 3 V.
6 COMP bidirectional Error amplifier output and PWM comparator input, where the frequency compensation network connects; the absolute maximum is 3 V.
7 GND power_in Device ground pin.
8 SW output Switching output node of the integrated high-side power MOSFET; the absolute range is −0.6 V to VIN + 0.3 V (−7 V for 5-ns transients).
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer 3PEAK(思瑞浦)
Package ESOP-8
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Supply Voltage -0.3 65 V 5
Switching Node Voltage, SW -0.6 V 5
Switching Node Voltage, SW 5-ns Transient -7 V 5-ns transient 5
Switching Node Voltage, SW 10-ns Transient -2 V 10-ns transient 5
Bootstrap Voltage, BOOT, SW -0.3 6.5 V 5
FB Feedback Voltage -0.3 3 V 5
COMP Compensation Voltage -0.3 3 V 5
EN Enable Input Voltage -0.3 8.4 V 5
RT/CLK Switching frequency setting / PLL Input -0.3 3 V 5
TJ Operating Junction Temperature Range TJ -40 150 °C 5
TA Ambient Temperature Range TA -40 125 °C 5
TSTG Storage Temperature Range TSTG -65 150 °C 5
TL Lead Temperature (Soldering, 10 sec) TL 260 °C Soldering, 10 sec 5
HBM Human Body Model ESD -2 2 kV ANSI/ESDA/JEDEC JS-001 5
CDM Charged Device Model ESD -1 1 kV ANSI/ESDA/JEDEC JS-002 5
VIN Power Supply Voltage VIN 4.5 60 V 5
VO Output Voltage Range VO 0.8 58 V 5
IO Output Current Range IO 0 3.5 A 5
TJ Operating Junction Temperature Range TJ -40 150 °C 5
VIN Operating Voltage Range VIN 4.5 60 V 7
Internal Under-voltage Lockout Threshold, rising V(UVLO) 4.1 4.3 4.48 V Rising threshold 7
IQ Quiescent Supply Current IQ 152 200 μA EN = 5 V, TA = 25 °C, V(FB) = 0.9 V 7
IQSD Shut-down Supply Current IQSD 2.25 50 μA EN = 0 V, TA = 25 °C 7
VFB Threshold Voltage VFB 0.788 0.8 0.812 V 7
HS Switching On-Resistance HSRDSON 80 185 mΩ VIN = 12 V, BOOT − SW = 5 V 7
Current Limit ILimit 4.5 5.5 6.8 A Full voltage and temperature range, Open-Loop 7
Current Limit ILimit 4.5 5.5 6.25 A Full temperature range, VIN = 12 V, Open-Loop 7
Current Limit ILimit 5.2 5.5 5.85 A TA = 25 °C, VIN = 12 V, Open-Loop 7
Error Amplifier Output Current Capability I(COMP) -31 31 μA V(COMP) = 1 V, 100-mV overdrive 7
EN Threshold Voltage VEN 1.1 1.2 1.3 V 7
EN Threshold −50 mV IEN -0.58 -1.2 -1.8 μA EN Threshold −50 mV 8
EN Threshold Hysteresis IEN,hys -2.2 -3.4 -4.5 μA 8
RT/CLK Rising Threshold Vth(RT/CLK),rising 1.55 2 V 8
RT/CLK Falling Threshold Vth(RT/CLK),falling 0.5 1.2 V 8
Switching Frequency using RT fSW 450 500 550 kHz RT = 200 kΩ 8
Switching Frequency using RT Mode fSW 100 2500 kHz 8
Switching Frequency using CLK Mode fSW 160 2300 kHz 8
Internal Under-voltage Lockout Hysteresis V(UVLO,hys) 325 mV 7
I(FB) Input Current I(FB) 50 nA 7
gm Error Amplifier Transconductance gm 350 μMhos −2 μA < ICOMP < 2 μA, VCOMP = 1 V 7
gm Error Amplifier Transconductance during Soft-Start gm 77 μMhos −2 μA < ICOMP < 2 μA, VCOMP = 1 V, VFB = 0.4 V 7
ADC Error Amplifier Gain ADC 10000 V/V V(FB) = 0.8 V 7
Minimal Unity Gain Bandwidth f(GBW),min 2500 kHz 7
COMP to SW Current Transconductance gCOMP-SW 12 A/V 7
Thermal Shutdown Temperature TSD 161 °C 7
Thermal Hysteresis THYS 20 °C 7
EN Threshold +50 mV IEN -4.6 μA EN Threshold +50 mV 8
Over-Current Protection Delay tOCP 60 ns 8
Enable to COMP Delay td,EN 540 μs 8
Soft-start Timer tss 2 ms fSW = 500 kHz 8
Minimal CLK Input Pulse Width tCLK,min 15 ns 8
RT/CLK Falling Edge to SW Rising Edge Delay td,CLK 55 ns fSW = 500 kHz 8
Maximum Dutycycle DMAX 99.9 % 8
PLL Lock in Time tPLL 78 μs fSW = 500 kHz 8
Thermal resistance, junction-to-ambient, ESOP8 θJA 53.1 °C/W 6
Thermal resistance, junction-to-case, ESOP8 θJC 75.2 °C/W 6

CAD (KiCad official)

  • Symbol: TPP60308-ES1R-S
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: tpp60308-es1r-s-etched.step / tpp60308-es1r-s-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpp60308-es1r-s.step / tpp60308-es1r-s.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 3PEAK(思瑞浦) datasheet (22 pp, sha256 5685e8ab56dabee0, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF