Generated by kicad-footprint-generator · KiCad file format 20260206
TPP60308-ES1R-S
3PEAK(思瑞浦) · DC-DC Converters · ESOP-8
TPP60308-ES1R-S from 3PEAK(思瑞浦), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | input | Bootstrap capacitor connects between BOOT and SW; the datasheet recommends a 0.1-µF ceramic capacitor rated 10 V or higher, and BOOT−SW is limited to 6.5 V absolute maximum. |
| 2 | VIN | power_in | Supply voltage input with a 4.5-V to 60-V operating range (absolute maximum −0.3 V to 65 V). |
| 3 | EN | input | Device enable with an internal pull-up current source; the threshold (1.2 V typical) can be raised with external resistors for UVLO, and the absolute maximum is 8.4 V. |
| 4 | RT/CLK | input | Sets the switching frequency through a resistor to GND in free-running mode, or acts as a high-impedance clock input for the internal PLL when synchronized to an external clock; the absolute maximum is 3 V. |
| 5 | FB | input | Feedback input to the inverting input of the gm error amplifier, referenced to the 0.8-V internal reference (0.788 V to 0.812 V); the absolute maximum is 3 V. |
| 6 | COMP | bidirectional | Error amplifier output and PWM comparator input, where the frequency compensation network connects; the absolute maximum is 3 V. |
| 7 | GND | power_in | Device ground pin. |
| 8 | SW | output | Switching output node of the integrated high-side power MOSFET; the absolute range is −0.6 V to VIN + 0.3 V (−7 V for 5-ns transients). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 3PEAK(思瑞浦) |
| Package | ESOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Supply Voltage | -0.3 | 65 | V | 5 | |||
| Switching Node Voltage, SW | -0.6 | V | 5 | ||||
| Switching Node Voltage, SW 5-ns Transient | -7 | V | 5-ns transient | 5 | |||
| Switching Node Voltage, SW 10-ns Transient | -2 | V | 10-ns transient | 5 | |||
| Bootstrap Voltage, BOOT, SW | -0.3 | 6.5 | V | 5 | |||
| FB Feedback Voltage | -0.3 | 3 | V | 5 | |||
| COMP Compensation Voltage | -0.3 | 3 | V | 5 | |||
| EN Enable Input Voltage | -0.3 | 8.4 | V | 5 | |||
| RT/CLK Switching frequency setting / PLL Input | -0.3 | 3 | V | 5 | |||
| TJ Operating Junction Temperature Range | TJ | -40 | 150 | °C | 5 | ||
| TA Ambient Temperature Range | TA | -40 | 125 | °C | 5 | ||
| TSTG Storage Temperature Range | TSTG | -65 | 150 | °C | 5 | ||
| TL Lead Temperature (Soldering, 10 sec) | TL | 260 | °C | Soldering, 10 sec | 5 | ||
| HBM Human Body Model ESD | -2 | 2 | kV | ANSI/ESDA/JEDEC JS-001 | 5 | ||
| CDM Charged Device Model ESD | -1 | 1 | kV | ANSI/ESDA/JEDEC JS-002 | 5 | ||
| VIN Power Supply Voltage | VIN | 4.5 | 60 | V | 5 | ||
| VO Output Voltage Range | VO | 0.8 | 58 | V | 5 | ||
| IO Output Current Range | IO | 0 | 3.5 | A | 5 | ||
| TJ Operating Junction Temperature Range | TJ | -40 | 150 | °C | 5 | ||
| VIN Operating Voltage Range | VIN | 4.5 | 60 | V | 7 | ||
| Internal Under-voltage Lockout Threshold, rising | V(UVLO) | 4.1 | 4.3 | 4.48 | V | Rising threshold | 7 |
| IQ Quiescent Supply Current | IQ | 152 | 200 | μA | EN = 5 V, TA = 25 °C, V(FB) = 0.9 V | 7 | |
| IQSD Shut-down Supply Current | IQSD | 2.25 | 50 | μA | EN = 0 V, TA = 25 °C | 7 | |
| VFB Threshold Voltage | VFB | 0.788 | 0.8 | 0.812 | V | 7 | |
| HS Switching On-Resistance | HSRDSON | 80 | 185 | mΩ | VIN = 12 V, BOOT − SW = 5 V | 7 | |
| Current Limit | ILimit | 4.5 | 5.5 | 6.8 | A | Full voltage and temperature range, Open-Loop | 7 |
| Current Limit | ILimit | 4.5 | 5.5 | 6.25 | A | Full temperature range, VIN = 12 V, Open-Loop | 7 |
| Current Limit | ILimit | 5.2 | 5.5 | 5.85 | A | TA = 25 °C, VIN = 12 V, Open-Loop | 7 |
| Error Amplifier Output Current Capability | I(COMP) | -31 | 31 | μA | V(COMP) = 1 V, 100-mV overdrive | 7 | |
| EN Threshold Voltage | VEN | 1.1 | 1.2 | 1.3 | V | 7 | |
| EN Threshold −50 mV | IEN | -0.58 | -1.2 | -1.8 | μA | EN Threshold −50 mV | 8 |
| EN Threshold Hysteresis | IEN,hys | -2.2 | -3.4 | -4.5 | μA | 8 | |
| RT/CLK Rising Threshold | Vth(RT/CLK),rising | 1.55 | 2 | V | 8 | ||
| RT/CLK Falling Threshold | Vth(RT/CLK),falling | 0.5 | 1.2 | V | 8 | ||
| Switching Frequency using RT | fSW | 450 | 500 | 550 | kHz | RT = 200 kΩ | 8 |
| Switching Frequency using RT Mode | fSW | 100 | 2500 | kHz | 8 | ||
| Switching Frequency using CLK Mode | fSW | 160 | 2300 | kHz | 8 | ||
| Internal Under-voltage Lockout Hysteresis | V(UVLO,hys) | 325 | mV | 7 | |||
| I(FB) Input Current | I(FB) | 50 | nA | 7 | |||
| gm Error Amplifier Transconductance | gm | 350 | μMhos | −2 μA < ICOMP < 2 μA, VCOMP = 1 V | 7 | ||
| gm Error Amplifier Transconductance during Soft-Start | gm | 77 | μMhos | −2 μA < ICOMP < 2 μA, VCOMP = 1 V, VFB = 0.4 V | 7 | ||
| ADC Error Amplifier Gain | ADC | 10000 | V/V | V(FB) = 0.8 V | 7 | ||
| Minimal Unity Gain Bandwidth | f(GBW),min | 2500 | kHz | 7 | |||
| COMP to SW Current Transconductance | gCOMP-SW | 12 | A/V | 7 | |||
| Thermal Shutdown Temperature | TSD | 161 | °C | 7 | |||
| Thermal Hysteresis | THYS | 20 | °C | 7 | |||
| EN Threshold +50 mV | IEN | -4.6 | μA | EN Threshold +50 mV | 8 | ||
| Over-Current Protection Delay | tOCP | 60 | ns | 8 | |||
| Enable to COMP Delay | td,EN | 540 | μs | 8 | |||
| Soft-start Timer | tss | 2 | ms | fSW = 500 kHz | 8 | ||
| Minimal CLK Input Pulse Width | tCLK,min | 15 | ns | 8 | |||
| RT/CLK Falling Edge to SW Rising Edge Delay | td,CLK | 55 | ns | fSW = 500 kHz | 8 | ||
| Maximum Dutycycle | DMAX | 99.9 | % | 8 | |||
| PLL Lock in Time | tPLL | 78 | μs | fSW = 500 kHz | 8 | ||
| Thermal resistance, junction-to-ambient, ESOP8 | θJA | 53.1 | °C/W | 6 | |||
| Thermal resistance, junction-to-case, ESOP8 | θJC | 75.2 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
TPP60308-ES1R-S - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
tpp60308-es1r-s-etched.step/tpp60308-es1r-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpp60308-es1r-s.step/tpp60308-es1r-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 3PEAK(思瑞浦) datasheet (22 pp, sha256
5685e8ab56dabee0, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).