3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F18445-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-20
PIC16F18445-I from Microchip Tech, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply pin; all VDD and VSS pins must be connected, and a 0.1 µF low-ESR ceramic decoupling capacitor is recommended on every VDD/VSS pair placed as close to the pins as possible. |
| 2 | RA5 | bidirectional | PORTA bit 5 I/O with analog input ANA5, digital inputs T1CKI, T2IN and SMT1SIG, interrupt-on-change, and a shared CLKIN/SOSCI/OSC1 oscillator connection. |
| 3 | RA4 | bidirectional | PORTA bit 4 I/O with analog input ANA4, digital inputs T1G, SMT1WIN and CCP4IN, interrupt-on-change, and a shared CLKOUT/SOSCO/OSC2 oscillator output. |
| 4 | RA3/MCLR/VPP | input | Input-only pin with no TRIS or LAT bits; it functions as the MCLR Reset input when MCLRE is enabled and as the VPP programming voltage input during high-voltage programming. |
| 5 | RC5 | bidirectional | PORTC bit 5 I/O with analog input ANC5, digital inputs MDCARH, T4IN and CCP1IN, interrupt-on-change, and the SDI2/SDA2, RX1/DT1 peripheral functions available via PPS. |
| 6 | RC4 | bidirectional | PORTC bit 4 I/O with analog input ANC4 and interrupt-on-change support. |
| 7 | RC3 | bidirectional | PORTC bit 3 I/O with analog input ANC3, comparator 1 and 2 inputs C1IN3- and C2IN3-, CCP2IN and CLCIN1 digital inputs, and interrupt-on-change. |
| 8 | RC6 | bidirectional | PORTC bit 6 I/O with analog input ANC6, SS1 slave-select input, and interrupt-on-change. |
| 9 | RC7 | bidirectional | PORTC bit 7 I/O with analog input ANC7 and interrupt-on-change. |
| 10 | RB7 | bidirectional | PORTB bit 7 I/O with analog input ANB7, digital input T6IN, SCK2/SCL2 and CK1 peripheral functions, and interrupt-on-change. |
| 11 | RB6 | bidirectional | PORTB bit 6 I/O with analog input ANB6, SCK1/SCL1 peripheral function, and interrupt-on-change. |
| 12 | RB5 | bidirectional | PORTB bit 5 I/O with analog input ANB5, digital inputs CCP3IN, CLCIN3, SDI2/SDA2 and RX1/DT1, and interrupt-on-change. |
| 13 | RB4 | bidirectional | PORTB bit 4 I/O with analog input ANB4, digital input T5G, CLCIN2 and SDI1/SDA1 peripheral functions, and interrupt-on-change. |
| 14 | RC2 | bidirectional | PORTC bit 2 I/O with analog input ANC2, ADC auto-conversion trigger input ADACT, comparator inputs C1IN2- and C2IN2-, MDCARL and T5CKI digital inputs, and interrupt-on-change. |
| 15 | RC1 | bidirectional | PORTC bit 1 I/O with analog input ANC1, comparator inputs C1IN1- and C2IN1-, and interrupt-on-change. |
| 16 | RC0 | bidirectional | PORTC bit 0 I/O with analog input ANC0, comparator 2 input C2IN0+, digital inputs T3CKI and T3G, and interrupt-on-change. |
| 17 | RA2 | bidirectional | PORTA bit 2 I/O with analog input ANA2, ADC and DAC negative reference inputs ADCVREF- and DAC1VREF-, digital inputs T0CKI, CWG1IN, CWG2IN, CLCIN0 and INT, and interrupt-on-change. |
| 18 | RA1 | bidirectional | PORTA bit 1 I/O with analog input ANA1, ADC positive reference input ADCVREF+, comparator 1 and 2 inputs C1IN0- and C2IN0-, DAC1VREF+, SS2 and MDSRC inputs, interrupt-on-change, and the ICDCLK/ICSPCLK programming clock pin. |
| 19 | RA0 | bidirectional | PORTA bit 0 I/O with analog input ANA0, comparator 1 input C1IN0+, DAC1OUT1 analog output, interrupt-on-change, and the ICDDAT/ICSPDAT programming data pin. |
| 20 | VSS | power_in | Ground reference pin; all VDD and VSS pins must be connected to the circuit ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 629 | |||
| Storage temperature | -65 | 150 | °C | 629 | |||
| Voltage on VDD pin with respect to VSS (PIC16F18425/45) | VDD | -0.3 | 6.5 | V | 629 | ||
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | 629 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | upper limit printed as VDD + 0.3 V | 629 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | |||
| Maximum current on VSS pin | 120 | mA | 85°C < TA ≤ +125°C | 629 | |||
| Maximum current on VDD pin | VDD | 250 | mA | -40°C ≤ TA ≤ +85°C | 629 | ||
| Maximum current on VDD pin | VDD | 85 | mA | 85°C < TA ≤ +125°C | 629 | ||
| Maximum current on any standard I/O pin | -50 | 50 | mA | 629 | |||
| Clamp current | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD | 629 | |
| Total power dissipation | 800 | mW | 629 | ||||
| VDD operating supply voltage (VDDMIN) | VDD | 2.3 | V | FOSC ≤ 16 MHz | 632 | ||
| VDD operating supply voltage (VDDMIN) | VDD | 2.5 | V | FOSC > 16 MHz | 632 | ||
| VDD operating supply voltage (VDDMAX) | VDD | 5.5 | V | 632 | |||
| Operating ambient temperature, industrial (TA_MIN) | TA | -40 | °C | Industrial temperature | 630 | ||
| Operating ambient temperature, industrial (TA_MAX) | TA | 85 | °C | Industrial temperature | 630 | ||
| RAM data retention voltage | VDR | 1.7 | V | Device in Sleep mode | 632 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 632 | ||
| Supply current, XT oscillator | IDDXT4 | 515 | 710 | μA | XT = 4 MHz; VDD 3.0V | 634 | |
| Supply current, HFINTOSC | IDDHFO16 | 2.2 | 2.7 | mA | HFINTOSC = 16 MHz; VDD 3.0V | 634 | |
| Supply current, HFINTOSC with PLL | IDDHFOPLL | 4 | 4.9 | mA | HFINTOSC = 32 MHz; VDD 3.0V | 634 | |
| Supply current, HS with PLL | IDDHSPLL32 | 3.7 | 4.5 | mA | HS+PLL = 32 MHz; VDD 3.0V | 634 | |
| Supply current, IDLE mode | IDDIDLE | 1.6 | 2 | mA | IDLE mode, HFINTOSC = 16 MHz; VDD 3.0V | 634 | |
| Power-down current, IPD base | IPD | 0.4 | 2.5 | μA | +85°C; VDD 3.0V | 636 | |
| Power-down current, Brown-out Reset (BOR) | IPD_BOR | 11 | 16 | μA | +85°C; VDD 3.0V | 636 | |
| Power-down current, Comparator | IPD_CMP | 31 | 58 | μA | +85°C; VDD 3.0V | 636 | |
| Input low voltage, TTL buffer | VIL | 0.8 | V | 4.5V≤VDD≤5.5V | 637 | ||
| Input low voltage, SMBus levels | VIL | 0.8 | V | 2.7V≤VDD≤5.5V | 637 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | 4.5V≤VDD≤5.5V | 637 | ||
| Input high voltage, SMBus levels | VIH | 2.1 | V | 2.7V≤VDD≤5.5V | 637 | ||
| Input leakage current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 637 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS≤VPIN≤VDD, pin at high-impedance, 85°C | 637 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | μA | VDD=3.0V, VPIN=VSS | 637 |
| Output low voltage, standard I/O | VOL | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 637 | ||
| All I/O pin capacitance | CIO | 5 | 50 | pF | 637 | ||
| Supply current during programming operation | IDDPGM | 10 | mA | 638 | |||
| Byte erase and write cycle time | TD_BEW | 4 | 5 | ms | 638 | ||
| System clock frequency (FOSC) | FOSC | 32 | MHz | (Note 2, Note 3) | 641 | ||
| High-speed (HS) oscillator clock frequency | FHS | 20 | MHz | Note 4 | 641 | ||
| Secondary oscillator clock frequency | FSEC | 32.4 | 32.768 | 33.1 | kHz | Note 4 | 641 |
| Low-Power Optimized HFINTOSC frequency (nominal 1 MHz) | FHFOSCLP | 0.92 | 1 | 1.08 | MHz | -40°C to 85°C | 642 |
| Low-Power Optimized HFINTOSC frequency (nominal 2 MHz) | FHFOSCLP | 1.84 | 2 | 2.16 | MHz | -40°C to 85°C | 642 |
| PLL input frequency range | FPLLIN | 4 | 16 | MHz | 643 | ||
| PLL output frequency range | FPLLOUT | 16 | 32 | MHz | (Note 1) | 643 | |
| Brown-out Reset voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV=0 | 646 |
| Brown-out Reset voltage | VBOR | 2.3 | 2.45 | 2.6 | V | BORV=1 (F devices only) | 646 |
| ADC integral error | EIL | -2 | 1 | 2 | LSb | ADCREF+=3.0V, ADCREF-= 0V | 647 |
| ADC differential error | EDL | -1 | 1 | 1 | LSb | ADCREF+=3.0V, ADCREF-= 0V | 647 |
| ADC offset error | EOFF | 0.5 | 6 | LSb | ADCREF+=3.0V, ADCREF-= 0V | 647 | |
| ADC gain error | EGN | -6 | 0.2 | 6 | LSb | ADCREF+=3.0V, ADCREF-= 0V | 647 |
| Comparator input offset voltage | VIOFF | -60 | 60 | mV | VICM = VDD/2 | 649 | |
| Comparator hysteresis | VHYST | 15 | 25 | 35 | mV | 649 | |
| Power-on Reset release voltage | VPOR | 1.6 | V | BOR or LPBOR disabled | 632 | ||
| Power-on Reset rearm voltage | VPORR | 1.5 | V | BOR or LPBOR disabled | 632 | ||
| Thermal resistance junction to ambient, 20-pin PDIP | θJA | 62.2 | °C/W | 20-pin PDIP package | 639 | ||
| Thermal resistance junction to case, 20-pin PDIP | θJC | 27.5 | °C/W | 20-pin PDIP package | 639 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 639 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 267 |
CAD (KiCad official)
- Symbol:
PIC16F18445-I - Footprint:
Package_DIP:DIP-20_W7.62mm - 3D model: PDIP-20 (KiCad packages3D, STEP)
- 3D model files:
pic16f18445-i-etched.step/pic16f18445-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f18445-i.step/pic16f18445-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (708 pp, sha256
13718a8e0897d6f9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).