Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F18445-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-20

PIC16F18445-I from Microchip Tech, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply pin; all VDD and VSS pins must be connected, and a 0.1 µF low-ESR ceramic decoupling capacitor is recommended on every VDD/VSS pair placed as close to the pins as possible.
2 RA5 bidirectional PORTA bit 5 I/O with analog input ANA5, digital inputs T1CKI, T2IN and SMT1SIG, interrupt-on-change, and a shared CLKIN/SOSCI/OSC1 oscillator connection.
3 RA4 bidirectional PORTA bit 4 I/O with analog input ANA4, digital inputs T1G, SMT1WIN and CCP4IN, interrupt-on-change, and a shared CLKOUT/SOSCO/OSC2 oscillator output.
4 RA3/MCLR/VPP input Input-only pin with no TRIS or LAT bits; it functions as the MCLR Reset input when MCLRE is enabled and as the VPP programming voltage input during high-voltage programming.
5 RC5 bidirectional PORTC bit 5 I/O with analog input ANC5, digital inputs MDCARH, T4IN and CCP1IN, interrupt-on-change, and the SDI2/SDA2, RX1/DT1 peripheral functions available via PPS.
6 RC4 bidirectional PORTC bit 4 I/O with analog input ANC4 and interrupt-on-change support.
7 RC3 bidirectional PORTC bit 3 I/O with analog input ANC3, comparator 1 and 2 inputs C1IN3- and C2IN3-, CCP2IN and CLCIN1 digital inputs, and interrupt-on-change.
8 RC6 bidirectional PORTC bit 6 I/O with analog input ANC6, SS1 slave-select input, and interrupt-on-change.
9 RC7 bidirectional PORTC bit 7 I/O with analog input ANC7 and interrupt-on-change.
10 RB7 bidirectional PORTB bit 7 I/O with analog input ANB7, digital input T6IN, SCK2/SCL2 and CK1 peripheral functions, and interrupt-on-change.
11 RB6 bidirectional PORTB bit 6 I/O with analog input ANB6, SCK1/SCL1 peripheral function, and interrupt-on-change.
12 RB5 bidirectional PORTB bit 5 I/O with analog input ANB5, digital inputs CCP3IN, CLCIN3, SDI2/SDA2 and RX1/DT1, and interrupt-on-change.
13 RB4 bidirectional PORTB bit 4 I/O with analog input ANB4, digital input T5G, CLCIN2 and SDI1/SDA1 peripheral functions, and interrupt-on-change.
14 RC2 bidirectional PORTC bit 2 I/O with analog input ANC2, ADC auto-conversion trigger input ADACT, comparator inputs C1IN2- and C2IN2-, MDCARL and T5CKI digital inputs, and interrupt-on-change.
15 RC1 bidirectional PORTC bit 1 I/O with analog input ANC1, comparator inputs C1IN1- and C2IN1-, and interrupt-on-change.
16 RC0 bidirectional PORTC bit 0 I/O with analog input ANC0, comparator 2 input C2IN0+, digital inputs T3CKI and T3G, and interrupt-on-change.
17 RA2 bidirectional PORTA bit 2 I/O with analog input ANA2, ADC and DAC negative reference inputs ADCVREF- and DAC1VREF-, digital inputs T0CKI, CWG1IN, CWG2IN, CLCIN0 and INT, and interrupt-on-change.
18 RA1 bidirectional PORTA bit 1 I/O with analog input ANA1, ADC positive reference input ADCVREF+, comparator 1 and 2 inputs C1IN0- and C2IN0-, DAC1VREF+, SS2 and MDSRC inputs, interrupt-on-change, and the ICDCLK/ICSPCLK programming clock pin.
19 RA0 bidirectional PORTA bit 0 I/O with analog input ANA0, comparator 1 input C1IN0+, DAC1OUT1 analog output, interrupt-on-change, and the ICDDAT/ICSPDAT programming data pin.
20 VSS power_in Ground reference pin; all VDD and VSS pins must be connected to the circuit ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-20
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 629
Storage temperature -65 150 °C 629
Voltage on VDD pin with respect to VSS (PIC16F18425/45) VDD -0.3 6.5 V 629
Voltage on MCLR pin with respect to VSS -0.3 9 V 629
Voltage on all other pins with respect to VSS -0.3 V upper limit printed as VDD + 0.3 V 629
Maximum current on VSS pin 250 mA -40°C ≤ TA ≤ +85°C 629
Maximum current on VSS pin 120 mA 85°C < TA ≤ +125°C 629
Maximum current on VDD pin VDD 250 mA -40°C ≤ TA ≤ +85°C 629
Maximum current on VDD pin VDD 85 mA 85°C < TA ≤ +125°C 629
Maximum current on any standard I/O pin -50 50 mA 629
Clamp current IK -20 20 mA VPIN < 0 or VPIN > VDD 629
Total power dissipation 800 mW 629
VDD operating supply voltage (VDDMIN) VDD 2.3 V FOSC ≤ 16 MHz 632
VDD operating supply voltage (VDDMIN) VDD 2.5 V FOSC > 16 MHz 632
VDD operating supply voltage (VDDMAX) VDD 5.5 V 632
Operating ambient temperature, industrial (TA_MIN) TA -40 °C Industrial temperature 630
Operating ambient temperature, industrial (TA_MAX) TA 85 °C Industrial temperature 630
RAM data retention voltage VDR 1.7 V Device in Sleep mode 632
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms BOR or LPBOR disabled 632
Supply current, XT oscillator IDDXT4 515 710 μA XT = 4 MHz; VDD 3.0V 634
Supply current, HFINTOSC IDDHFO16 2.2 2.7 mA HFINTOSC = 16 MHz; VDD 3.0V 634
Supply current, HFINTOSC with PLL IDDHFOPLL 4 4.9 mA HFINTOSC = 32 MHz; VDD 3.0V 634
Supply current, HS with PLL IDDHSPLL32 3.7 4.5 mA HS+PLL = 32 MHz; VDD 3.0V 634
Supply current, IDLE mode IDDIDLE 1.6 2 mA IDLE mode, HFINTOSC = 16 MHz; VDD 3.0V 634
Power-down current, IPD base IPD 0.4 2.5 μA +85°C; VDD 3.0V 636
Power-down current, Brown-out Reset (BOR) IPD_BOR 11 16 μA +85°C; VDD 3.0V 636
Power-down current, Comparator IPD_CMP 31 58 μA +85°C; VDD 3.0V 636
Input low voltage, TTL buffer VIL 0.8 V 4.5V≤VDD≤5.5V 637
Input low voltage, SMBus levels VIL 0.8 V 2.7V≤VDD≤5.5V 637
Input high voltage, TTL buffer VIH 2 V 4.5V≤VDD≤5.5V 637
Input high voltage, SMBus levels VIH 2.1 V 2.7V≤VDD≤5.5V 637
Input leakage current, I/O ports IIL -125 5 125 nA VSS≤VPIN≤VDD, pin at high-impedance, 85°C 637
Input leakage current, MCLR IIL -200 50 200 nA VSS≤VPIN≤VDD, pin at high-impedance, 85°C 637
Weak pull-up current IPUR 25 120 200 μA VDD=3.0V, VPIN=VSS 637
Output low voltage, standard I/O VOL 0.6 V IOL = 10 mA, VDD = 3.0V 637
All I/O pin capacitance CIO 5 50 pF 637
Supply current during programming operation IDDPGM 10 mA 638
Byte erase and write cycle time TD_BEW 4 5 ms 638
System clock frequency (FOSC) FOSC 32 MHz (Note 2, Note 3) 641
High-speed (HS) oscillator clock frequency FHS 20 MHz Note 4 641
Secondary oscillator clock frequency FSEC 32.4 32.768 33.1 kHz Note 4 641
Low-Power Optimized HFINTOSC frequency (nominal 1 MHz) FHFOSCLP 0.92 1 1.08 MHz -40°C to 85°C 642
Low-Power Optimized HFINTOSC frequency (nominal 2 MHz) FHFOSCLP 1.84 2 2.16 MHz -40°C to 85°C 642
PLL input frequency range FPLLIN 4 16 MHz 643
PLL output frequency range FPLLOUT 16 32 MHz (Note 1) 643
Brown-out Reset voltage VBOR 2.55 2.7 2.85 V BORV=0 646
Brown-out Reset voltage VBOR 2.3 2.45 2.6 V BORV=1 (F devices only) 646
ADC integral error EIL -2 1 2 LSb ADCREF+=3.0V, ADCREF-= 0V 647
ADC differential error EDL -1 1 1 LSb ADCREF+=3.0V, ADCREF-= 0V 647
ADC offset error EOFF 0.5 6 LSb ADCREF+=3.0V, ADCREF-= 0V 647
ADC gain error EGN -6 0.2 6 LSb ADCREF+=3.0V, ADCREF-= 0V 647
Comparator input offset voltage VIOFF -60 60 mV VICM = VDD/2 649
Comparator hysteresis VHYST 15 25 35 mV 649
Power-on Reset release voltage VPOR 1.6 V BOR or LPBOR disabled 632
Power-on Reset rearm voltage VPORR 1.5 V BOR or LPBOR disabled 632
Thermal resistance junction to ambient, 20-pin PDIP θJA 62.2 °C/W 20-pin PDIP package 639
Thermal resistance junction to case, 20-pin PDIP θJC 27.5 °C/W 20-pin PDIP package 639
Maximum junction temperature TJMAX 150 °C 639

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS body RxyPPS 267

CAD (KiCad official)

  • Symbol: PIC16F18445-I
  • Footprint: Package_DIP:DIP-20_W7.62mm
  • 3D model: PDIP-20 (KiCad packages3D, STEP)
  • 3D model files: pic16f18445-i-etched.step / pic16f18445-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f18445-i.step / pic16f18445-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (708 pp, sha256 13718a8e0897d6f9, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF