Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCD57256DR2G

onsemi · Gate Drivers · SOIC-16

NCD57256DR2G from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INA input Non-inverting gate driver input defining OUTA, with 125 kΩ equivalent pull-down; logic levels scale with VDDI up to 5 V and maximum voltage is VDDI.
2 INB input Non-inverting gate driver input defining OUTB, with 125 kΩ equivalent pull-down; must be connected to INA when ANB is high, maximum voltage is VDDI.
3 VDDI power_in Low voltage side power supply (3.3 V to 20 V bias) requiring a good quality bypass capacitor to GNDI placed close to the pin.
4 GNDI power_in Low voltage side ground.
5 DIS input A high level turns both OUTA and OUTB low regardless of INA, INB, DT and ANB, with 125 kΩ equivalent pull-down and maximum voltage VDDI.
6 DT input Deadtime pin where tDT (ns) ≈ 10 x RDT (kΩ) with RDT from 5 to 500 kΩ to GNDI; pulling to VDDI disables deadtime and interlock, maximum voltage is VDDI.
7 ANB input A high level enables OUTA and OUTB as complementary outputs from one PWM input on INA, with 100 kΩ equivalent pull-down; keep low when INA and INB are controlled individually.
8 VDDI power_in Low voltage side power supply, second VDDI pin, requiring a good quality bypass capacitor to GNDI placed close to the pin.
9 GNDB power_in Ground for channel B.
10 OUTB output Channel B high voltage side gate drive output, galvanically isolated from the low voltage side and channel A, actively pulled low during startup, when DIS is high and under UVLOB or UVLOI.
11 VDDB power_in High voltage side power supply for channel B (absolute maximum 36 V) requiring a good quality bypass capacitor to GNDB placed close to the pin.
12 NC unconnected Not connected internally.
13 NC unconnected Not connected internally.
14 GNDA power_in Ground for channel A.
15 OUTA output Channel A high voltage side gate drive output, galvanically isolated from the low voltage side and channel B, actively pulled low during startup, when DIS is high and under UVLOA or UVLOI.
16 VDDA power_in High voltage side power supply for channel A (absolute maximum 36 V) requiring a good quality bypass capacitor to GNDA placed close to the pin.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-16
Category Motor Driver ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDDA/VDDB Under Voltage Output Enabled VUVLOA-OUT-ON 8.6 9.1 9.6 V NCx57253/NCx57256 7
VDDA/VDDB Under Voltage Output Disabled VUVLOA-OUT-OFF 7.6 8.1 8.6 V NCx57253/NCx57256 7
Propagation delay OUTA high tPD-ON-A 40 60 80 ns CLOAD = 10 nF, VINAH to 10% of Output Change for PW > 150 ns 9
Propagation delay OUTA low tPD-OFF-A 40 60 80 ns CLOAD = 10 nF, VINAL to 90% of Output Change for PW > 150 ns 9
Propagation delay OUTB high tPD-ON-B 40 60 80 ns CLOAD = 10 nF, VINBH to 10% of Output Change for PW > 150 ns 9
Propagation delay OUTB low tPD-OFF-B 40 60 80 ns CLOAD = 10 nF, VINBL to 90% of Output Change for PW > 150 ns 9
Propagation delay distortion channel A tDISTORT-A -20 0 20 ns PW >150 ns 9
Propagation delay distortion channel B tDISTORT-B -20 0 20 ns PW >150 ns 9
Rising edge delay distortion tDISTORT-ON -20 0 20 ns PW >150 ns 9
Falling edge delay distortion tDISTORT-OFF -20 0 20 ns PW >150 ns 9
Output Low State VOUTAL1 0.1 0.22 V ISINK = 200 mA, TA = 25°C 8
Output Low State over temperature VOUTAL2 0.5 V ISINK = 200 mA, TA = −40°C to 125°C 8
Output High State VOUTAH1 14.7 14.8 V ISRC = 200 mA, TA = 25°C 8
Output High State over temperature VOUTAH2 14.2 V ISRC = 200 mA, TA = −40°C to 125°C 8
Peak Driver Current, Sink IPK-SNK1 3.5 A SOIC-16 (NCx57255, NCx57256) 8
Peak Driver Current, Source IPK-SRC1 3.5 A SOIC-16 (NCx57255, NCx57256) 8
Peak Miller Plateau Current, Sink IPK-SNK2 3 A VOUTA = VOUTB = 6 V, SOIC-16 (NCx57255, NCx57256) 8
Peak Miller Plateau Current, Source IPK-SRC2 3 A VOUTA = VOUTB = 9 V, SOIC-16 (NCx57255, NCx57256) 8
Input Pulse Width for guaranteed output (positive) tMIN2 40 ns Positive pulse (L-H-L), TA = 25°C 9
Input Pulse Width for no output (positive) tMIN1 10 ns Positive pulse (L-H-L), TA = 25°C 9
Clamping Voltage VCLAMP-OUT 0.4 0.6 V IOUTA = IOUTB = 500 mA (pulse test, tCLPmax = 10 s) 8
Supply voltage low side VDDI-GNDI -0.3 22 V 6
Supply voltage high side channel A VDDA-GNDA -0.3 36 V 6
Supply voltage high side channel B VDDB-GNDB -0.3 36 V 6
Gate driver output sourcing current IPK-SRC 3.5 A NCx57255, NCx57256; max pulse width = 10 s, min period = 5 ms, VDDA-GNDA = VDDB-GNDB = 15 V 6
Gate driver output sinking current IPK-SNK 3.5 A NCx57255, NCx57256; max pulse width = 10 s, min period = 5 ms, VDDA-GNDA = VDDB-GNDB = 15 V 6
Voltage at INA, INB, DIS, DT, ANB VLIM-GNDI -0.3 0 V max is VDDI + 0.3 V 6
Power Dissipation PD 1400 mW SOIC-16 (NCx57255, NCx57256) 6
Maximum Junction Temperature TJ(max) -40 150 °C 6
Storage Temperature Range TSTG -65 150 °C 6
ESD Human Body Model ESDHBM -4 4 kV 6
ESD Charged Device Model ESDCDM -2 2 kV 6
Lead Temperature Soldering Reflow TSLD 260 °C Pb-Free Versions 6
Supply voltage, low voltage side VDDI-GNDI 20 V min is UVLOI 7
Supply voltage, channel A VDDA-GNDA 32 V min is UVLOA 7
Supply voltage, channel B VDDB-GNDB 32 V min is UVLOB 7
Ambient Temperature TA -40 125 °C 7
Common Mode Transient Immunity /dVISO/dt/ 100 kV/s 7
Thermal Resistance Junction-to-Air RJA 164 °C/W SOIC-16 (NCx57255/56), 100 mm2, 2 oz Copper, 1 Surface Layer 6
Thermal Resistance Junction-to-Air RJA 118 °C/W SOIC-16 (NCx57255/56), 100 mm2, 2 oz Copper, 2 Surface Layers and 2 Internal Power Plane Layers 6
Input-Output Isolation Voltage VISO 2500 VRMS TA = 25°C, RH < 50%, t = 1.0 minute, SOIC-16 (NCx57255, NCx57256) 7
Output-Output Isolation Voltage VISO 1500 VRMS TA = 25°C, RH < 50%, t = 1.0 minute 7
Rise Time tRISE 12 ns CLOAD = 1 nF, 10% to 90% of Output Change 9
Fall Time tFALL 10 ns CLOAD = 1 nF, 90% to 10% of Output Change 9

CAD (KiCad official)

  • Symbol: NCD57256DR2G
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: ncd57256dr2g-etched.step / ncd57256dr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncd57256dr2g.step / ncd57256dr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (24 pp, sha256 7c9d84b0be78b943, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF