3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCD57256DR2G
onsemi · Gate Drivers · SOIC-16
NCD57256DR2G from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INA | input | Non-inverting gate driver input defining OUTA, with 125 kΩ equivalent pull-down; logic levels scale with VDDI up to 5 V and maximum voltage is VDDI. |
| 2 | INB | input | Non-inverting gate driver input defining OUTB, with 125 kΩ equivalent pull-down; must be connected to INA when ANB is high, maximum voltage is VDDI. |
| 3 | VDDI | power_in | Low voltage side power supply (3.3 V to 20 V bias) requiring a good quality bypass capacitor to GNDI placed close to the pin. |
| 4 | GNDI | power_in | Low voltage side ground. |
| 5 | DIS | input | A high level turns both OUTA and OUTB low regardless of INA, INB, DT and ANB, with 125 kΩ equivalent pull-down and maximum voltage VDDI. |
| 6 | DT | input | Deadtime pin where tDT (ns) ≈ 10 x RDT (kΩ) with RDT from 5 to 500 kΩ to GNDI; pulling to VDDI disables deadtime and interlock, maximum voltage is VDDI. |
| 7 | ANB | input | A high level enables OUTA and OUTB as complementary outputs from one PWM input on INA, with 100 kΩ equivalent pull-down; keep low when INA and INB are controlled individually. |
| 8 | VDDI | power_in | Low voltage side power supply, second VDDI pin, requiring a good quality bypass capacitor to GNDI placed close to the pin. |
| 9 | GNDB | power_in | Ground for channel B. |
| 10 | OUTB | output | Channel B high voltage side gate drive output, galvanically isolated from the low voltage side and channel A, actively pulled low during startup, when DIS is high and under UVLOB or UVLOI. |
| 11 | VDDB | power_in | High voltage side power supply for channel B (absolute maximum 36 V) requiring a good quality bypass capacitor to GNDB placed close to the pin. |
| 12 | NC | unconnected | Not connected internally. |
| 13 | NC | unconnected | Not connected internally. |
| 14 | GNDA | power_in | Ground for channel A. |
| 15 | OUTA | output | Channel A high voltage side gate drive output, galvanically isolated from the low voltage side and channel B, actively pulled low during startup, when DIS is high and under UVLOA or UVLOI. |
| 16 | VDDA | power_in | High voltage side power supply for channel A (absolute maximum 36 V) requiring a good quality bypass capacitor to GNDA placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16 |
| Category | Motor Driver ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDDA/VDDB Under Voltage Output Enabled | VUVLOA-OUT-ON | 8.6 | 9.1 | 9.6 | V | NCx57253/NCx57256 | 7 |
| VDDA/VDDB Under Voltage Output Disabled | VUVLOA-OUT-OFF | 7.6 | 8.1 | 8.6 | V | NCx57253/NCx57256 | 7 |
| Propagation delay OUTA high | tPD-ON-A | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINAH to 10% of Output Change for PW > 150 ns | 9 |
| Propagation delay OUTA low | tPD-OFF-A | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINAL to 90% of Output Change for PW > 150 ns | 9 |
| Propagation delay OUTB high | tPD-ON-B | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINBH to 10% of Output Change for PW > 150 ns | 9 |
| Propagation delay OUTB low | tPD-OFF-B | 40 | 60 | 80 | ns | CLOAD = 10 nF, VINBL to 90% of Output Change for PW > 150 ns | 9 |
| Propagation delay distortion channel A | tDISTORT-A | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Propagation delay distortion channel B | tDISTORT-B | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Rising edge delay distortion | tDISTORT-ON | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Falling edge delay distortion | tDISTORT-OFF | -20 | 0 | 20 | ns | PW >150 ns | 9 |
| Output Low State | VOUTAL1 | 0.1 | 0.22 | V | ISINK = 200 mA, TA = 25°C | 8 | |
| Output Low State over temperature | VOUTAL2 | 0.5 | V | ISINK = 200 mA, TA = −40°C to 125°C | 8 | ||
| Output High State | VOUTAH1 | 14.7 | 14.8 | V | ISRC = 200 mA, TA = 25°C | 8 | |
| Output High State over temperature | VOUTAH2 | 14.2 | V | ISRC = 200 mA, TA = −40°C to 125°C | 8 | ||
| Peak Driver Current, Sink | IPK-SNK1 | 3.5 | A | SOIC-16 (NCx57255, NCx57256) | 8 | ||
| Peak Driver Current, Source | IPK-SRC1 | 3.5 | A | SOIC-16 (NCx57255, NCx57256) | 8 | ||
| Peak Miller Plateau Current, Sink | IPK-SNK2 | 3 | A | VOUTA = VOUTB = 6 V, SOIC-16 (NCx57255, NCx57256) | 8 | ||
| Peak Miller Plateau Current, Source | IPK-SRC2 | 3 | A | VOUTA = VOUTB = 9 V, SOIC-16 (NCx57255, NCx57256) | 8 | ||
| Input Pulse Width for guaranteed output (positive) | tMIN2 | 40 | ns | Positive pulse (L-H-L), TA = 25°C | 9 | ||
| Input Pulse Width for no output (positive) | tMIN1 | 10 | ns | Positive pulse (L-H-L), TA = 25°C | 9 | ||
| Clamping Voltage | VCLAMP-OUT | 0.4 | 0.6 | V | IOUTA = IOUTB = 500 mA (pulse test, tCLPmax = 10 s) | 8 | |
| Supply voltage low side | VDDI-GNDI | -0.3 | 22 | V | 6 | ||
| Supply voltage high side channel A | VDDA-GNDA | -0.3 | 36 | V | 6 | ||
| Supply voltage high side channel B | VDDB-GNDB | -0.3 | 36 | V | 6 | ||
| Gate driver output sourcing current | IPK-SRC | 3.5 | A | NCx57255, NCx57256; max pulse width = 10 s, min period = 5 ms, VDDA-GNDA = VDDB-GNDB = 15 V | 6 | ||
| Gate driver output sinking current | IPK-SNK | 3.5 | A | NCx57255, NCx57256; max pulse width = 10 s, min period = 5 ms, VDDA-GNDA = VDDB-GNDB = 15 V | 6 | ||
| Voltage at INA, INB, DIS, DT, ANB | VLIM-GNDI | -0.3 | 0 | V | max is VDDI + 0.3 V | 6 | |
| Power Dissipation | PD | 1400 | mW | SOIC-16 (NCx57255, NCx57256) | 6 | ||
| Maximum Junction Temperature | TJ(max) | -40 | 150 | °C | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| ESD Human Body Model | ESDHBM | -4 | 4 | kV | 6 | ||
| ESD Charged Device Model | ESDCDM | -2 | 2 | kV | 6 | ||
| Lead Temperature Soldering Reflow | TSLD | 260 | °C | Pb-Free Versions | 6 | ||
| Supply voltage, low voltage side | VDDI-GNDI | 20 | V | min is UVLOI | 7 | ||
| Supply voltage, channel A | VDDA-GNDA | 32 | V | min is UVLOA | 7 | ||
| Supply voltage, channel B | VDDB-GNDB | 32 | V | min is UVLOB | 7 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 7 | ||
| Common Mode Transient Immunity | /dVISO/dt/ | 100 | kV/s | 7 | |||
| Thermal Resistance Junction-to-Air | RJA | 164 | °C/W | SOIC-16 (NCx57255/56), 100 mm2, 2 oz Copper, 1 Surface Layer | 6 | ||
| Thermal Resistance Junction-to-Air | RJA | 118 | °C/W | SOIC-16 (NCx57255/56), 100 mm2, 2 oz Copper, 2 Surface Layers and 2 Internal Power Plane Layers | 6 | ||
| Input-Output Isolation Voltage | VISO | 2500 | VRMS | TA = 25°C, RH < 50%, t = 1.0 minute, SOIC-16 (NCx57255, NCx57256) | 7 | ||
| Output-Output Isolation Voltage | VISO | 1500 | VRMS | TA = 25°C, RH < 50%, t = 1.0 minute | 7 | ||
| Rise Time | tRISE | 12 | ns | CLOAD = 1 nF, 10% to 90% of Output Change | 9 | ||
| Fall Time | tFALL | 10 | ns | CLOAD = 1 nF, 90% to 10% of Output Change | 9 |
CAD (KiCad official)
- Symbol:
NCD57256DR2G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
ncd57256dr2g-etched.step/ncd57256dr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncd57256dr2g.step/ncd57256dr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (24 pp, sha256
7c9d84b0be78b943, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).