Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FM17580-QNA-T-G

FUDAN MICRO · RF Chips · VQFN-32-EP(5x5)

FM17580-QNA-T-G from FUDAN MICRO, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin.
2 PVDD power_in Host interface power supply pin; SPI runs up to 10Mbps, and up to 5Mbps when PVDD is 1.7V.
3 NC unconnected No connect pin.
4 DVSS power_in Digital ground pin.
5 PVSS power_in Ground pin for the host interface (PVDD) supply.
6 NPD input Power-down control input; the datasheet text gives no further function.
7 NC unconnected No connect pin.
8 TOUT output Output pin; the datasheet text gives no further function.
9 NC unconnected No connect pin.
10 TVSS power_in Ground pin for the RF transmitter driver.
11 TX1 output RF transmitter driver output 1, powered from the separate TVDD supply.
12 TVDD power_in Separate RF transmitter driver supply, up to 5.5V maximum.
13 TX2 output RF transmitter driver output 2, powered from the separate TVDD supply.
14 TVSS power_in Ground pin for the RF transmitter driver.
15 AVDD power_in Analog supply pin; the chip operates over a 2.5V to 3.6V supply range.
16 VMID passive Internal reference voltage pin for external decoupling.
17 RX input Receiver input pin for the RF signal.
18 AVSS power_in Analog ground pin.
19 AUX output Auxiliary pin; the datasheet text gives no further function.
20 NC unconnected No connect pin.
21 OSCIN input Oscillator input for the external 27.12MHz crystal.
22 OSCOUT output Oscillator output for the external 27.12MHz crystal.
23 IRQ output Interrupt request output with flexibly configurable interrupt mode.
24 NSS input Host interface select input (SPI slave select).
25 D1 bidirectional Host interface data pin; programmable I/O pin.
26 D2 bidirectional Host interface data pin; programmable I/O pin.
27 D3 bidirectional Host interface data pin; programmable I/O pin.
28 D4 bidirectional Host interface data pin; programmable I/O pin.
29 SCK input SPI serial clock input, up to 10Mbps.
30 MOSI input SPI master-out slave-in data input.
31 MISO output SPI master-in slave-out data output.
32 NC unconnected No connect pin.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer FUDAN MICRO
Package VQFN-32-EP(5x5)
Category RF & Radio
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Wide operating voltage range (supply, as stated in feature list) 2.5 3.6 V 4
RF transmit driver supply (independent supply, up to) 5.5 V 4
SPI interface maximum data rate 10 Mbps 4
SPI interface maximum data rate 5 Mbps PVDD = 1.7 V 4
Deep powerdown mode current 50 nA room temperature (常温) 4
Operating temperature (industrial grade) -40 85 ℃ industrial grade, ordering information 7
Reader operating distance (up to) 50 mm depends on antenna design 4

CAD (KiCad official)

  • Symbol: FM17580-QNA-T-G
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: fm17580-qna-t-g-etched.step / fm17580-qna-t-g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm17580-qna-t-g.step / fm17580-qna-t-g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FUDAN MICRO datasheet (8 pp, sha256 7e20888a199319ab, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF