component
FM17580-QNA-T-G
Public Made by Adomby adom
FUDAN MICRO RF Chips, VQFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FM17580-QNA-T-G
FUDAN MICRO · RF Chips · VQFN-32-EP(5x5)
FM17580-QNA-T-G from FUDAN MICRO, in a VQFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin. |
| 2 | PVDD | power_in | Host interface power supply pin; SPI runs up to 10Mbps, and up to 5Mbps when PVDD is 1.7V. |
| 3 | NC | unconnected | No connect pin. |
| 4 | DVSS | power_in | Digital ground pin. |
| 5 | PVSS | power_in | Ground pin for the host interface (PVDD) supply. |
| 6 | NPD | input | Power-down control input; the datasheet text gives no further function. |
| 7 | NC | unconnected | No connect pin. |
| 8 | TOUT | output | Output pin; the datasheet text gives no further function. |
| 9 | NC | unconnected | No connect pin. |
| 10 | TVSS | power_in | Ground pin for the RF transmitter driver. |
| 11 | TX1 | output | RF transmitter driver output 1, powered from the separate TVDD supply. |
| 12 | TVDD | power_in | Separate RF transmitter driver supply, up to 5.5V maximum. |
| 13 | TX2 | output | RF transmitter driver output 2, powered from the separate TVDD supply. |
| 14 | TVSS | power_in | Ground pin for the RF transmitter driver. |
| 15 | AVDD | power_in | Analog supply pin; the chip operates over a 2.5V to 3.6V supply range. |
| 16 | VMID | passive | Internal reference voltage pin for external decoupling. |
| 17 | RX | input | Receiver input pin for the RF signal. |
| 18 | AVSS | power_in | Analog ground pin. |
| 19 | AUX | output | Auxiliary pin; the datasheet text gives no further function. |
| 20 | NC | unconnected | No connect pin. |
| 21 | OSCIN | input | Oscillator input for the external 27.12MHz crystal. |
| 22 | OSCOUT | output | Oscillator output for the external 27.12MHz crystal. |
| 23 | IRQ | output | Interrupt request output with flexibly configurable interrupt mode. |
| 24 | NSS | input | Host interface select input (SPI slave select). |
| 25 | D1 | bidirectional | Host interface data pin; programmable I/O pin. |
| 26 | D2 | bidirectional | Host interface data pin; programmable I/O pin. |
| 27 | D3 | bidirectional | Host interface data pin; programmable I/O pin. |
| 28 | D4 | bidirectional | Host interface data pin; programmable I/O pin. |
| 29 | SCK | input | SPI serial clock input, up to 10Mbps. |
| 30 | MOSI | input | SPI master-out slave-in data input. |
| 31 | MISO | output | SPI master-in slave-out data output. |
| 32 | NC | unconnected | No connect pin. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUDAN MICRO |
| Package | VQFN-32-EP(5x5) |
| Category | RF & Radio |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Wide operating voltage range (supply, as stated in feature list) | 2.5 | 3.6 | V | 4 | |||
| RF transmit driver supply (independent supply, up to) | 5.5 | V | 4 | ||||
| SPI interface maximum data rate | 10 | Mbps | 4 | ||||
| SPI interface maximum data rate | 5 | Mbps | PVDD = 1.7 V | 4 | |||
| Deep powerdown mode current | 50 | nA | room temperature (常温) | 4 | |||
| Operating temperature (industrial grade) | -40 | 85 | ℃ | industrial grade, ordering information | 7 | ||
| Reader operating distance (up to) | 50 | mm | depends on antenna design | 4 |
CAD (KiCad official)
- Symbol:
FM17580-QNA-T-G - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
fm17580-qna-t-g-etched.step/fm17580-qna-t-g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm17580-qna-t-g.step/fm17580-qna-t-g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUDAN MICRO datasheet (8 pp, sha256
7e20888a199319ab, retrieved 2026-10-30, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).