Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18LF2515-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC18LF2515-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RE3 input Master Clear (Reset) input, an active-low Reset to the device; alternatively the programming voltage input (VPP) or digital input RE3 when the MCLRE Configuration bit is clear.
2 RA0/AN0 bidirectional Digital I/O (TTL input) with analog input channel 0 for the A/D and comparator C1- input.
3 RA1/AN1 bidirectional Digital I/O (TTL input) with analog input channel 1 for the A/D and comparator C2- input.
4 RA2/AN2/VREF-/CVREF bidirectional Digital I/O with analog input 2, A/D reference voltage (low) input VREF-, or comparator voltage reference output CVREF.
5 RA3/AN3/VREF+ bidirectional Digital I/O with analog input 3 or A/D reference voltage (high) input VREF+.
6 RA4/T0CKI/C1OUT bidirectional Digital I/O with Schmitt Trigger input, serving as Timer0 external clock input (T0CKI) or Comparator 1 output (C1OUT).
7 RA5/AN4/SS/HLVDIN/C2OUT bidirectional Digital I/O with analog input 4, SPI slave select input (SS), High/Low-Voltage Detect input (HLVDIN), or Comparator 2 output (C2OUT).
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (OSC1/CLKI); in internal oscillator modes this pin is general purpose I/O RA7.
10 OSC2/CLKO/RA6 output Oscillator crystal output, or CLKO (FOSC/4) output in RC mode; in RCIO, INTIO2 and ECIO modes this pin is general purpose I/O RA6.
11 RC0/T1OSO/T13CKI bidirectional Digital I/O with Schmitt Trigger input, serving as Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI).
12 RC1/T1OSI/CCP2 bidirectional Digital I/O with Timer1 oscillator input (T1OSI) or CCP2 capture input/compare and PWM output (default CCP2 assignment when CCP2MX is set).
13 RC2/CCP1 bidirectional Digital I/O with Capture 1 input, Compare 1 output or PWM 1 output (CCP1).
14 RC3/SCK/SCL bidirectional Digital I/O with synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL).
15 RC4/SDI/SDA bidirectional Digital I/O with SPI data input (SDI) or I2C data I/O (SDA).
16 RC5/SDO bidirectional Digital I/O with SPI data output (SDO).
17 RC6/TX/CK bidirectional Digital I/O with EUSART asynchronous transmit (TX) or EUSART synchronous clock (CK).
18 RC7/RX/DT bidirectional Digital I/O with EUSART asynchronous receive (RX) or EUSART synchronous data (DT).
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT0/FLT0/AN12 bidirectional Digital I/O with weak pull-up when RBPU is cleared, external interrupt 0 (INT0), PWM Fault input for CCP1 (FLT0), or analog input 12.
22 RB1/INT1/AN10 bidirectional Digital I/O with weak pull-up when RBPU is cleared, external interrupt 1 (INT1), or analog input 10.
23 RB2/INT2/AN8 bidirectional Digital I/O with weak pull-up when RBPU is cleared, external interrupt 2 (INT2), or analog input 8.
24 RB3/AN9/CCP2 bidirectional Digital I/O with weak pull-up when RBPU is cleared, analog input 9, or CCP2 capture input/compare and PWM output (alternate CCP2 assignment when CCP2MX is cleared).
25 RB4/KBI0/AN11 bidirectional Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI0, or analog input 11.
26 RB5/KBI1/PGM bidirectional Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI1, or low-voltage ICSP programming enable pin (PGM).
27 RB6/KBI2/PGC bidirectional Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI2, or ICSP/ICD programming clock pin (PGC).
28 RB7/KBI3/PGD bidirectional Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI3, or ICSP/ICD programming data pin (PGD).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0000) 2.06 2.17 2.28 V LVV = 0000; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0001) 2.12 2.23 2.34 V LVV = 0001; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0010) 2.24 2.36 2.48 V LVV = 0010; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0011) 2.32 2.44 2.56 V LVV = 0011; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0100) 2.47 2.6 2.73 V LVV = 0100; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0101) 2.65 2.79 2.93 V LVV = 0101; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0110) 2.74 2.89 3.04 V LVV = 0110; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 0111) 2.96 3.12 3.28 V LVV = 0111; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1000) 3.22 3.39 3.56 V LVV = 1000; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1001) 3.37 3.55 3.73 V LVV = 1001; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1010) 3.52 3.71 3.9 V LVV = 1010; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1011) 3.7 3.9 4.1 V LVV = 1011; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1100) 3.9 4.11 4.32 V LVV = 1100; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1101) 4.11 4.33 4.55 V LVV = 1101; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
D420 HLVD Voltage on VDD Transition High to Low (LVV = 1110) 4.36 4.59 4.82 V LVV = 1110; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) 328
Operating VDD range, low-voltage (PIC18LF) devices VDD 2 5.5 V PIC18LF (LF) low-voltage devices; stated in Section 1.3 text, not a table row 8

CAD (KiCad official)

  • Symbol: PIC18LF2515-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic18lf2515-i-so-etched.step / pic18lf2515-i-so-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18lf2515-i-so.step / pic18lf2515-i-so.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (376 pp, sha256 58bdc0dc5321bdfe, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF