Generated by kicad-footprint-generator · KiCad file format 20260206
PIC18LF2515-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC18LF2515-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Master Clear (Reset) input, an active-low Reset to the device; alternatively the programming voltage input (VPP) or digital input RE3 when the MCLRE Configuration bit is clear. |
| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL input) with analog input channel 0 for the A/D and comparator C1- input. |
| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL input) with analog input channel 1 for the A/D and comparator C2- input. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O with analog input 2, A/D reference voltage (low) input VREF-, or comparator voltage reference output CVREF. |
| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O with analog input 3 or A/D reference voltage (high) input VREF+. |
| 6 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O with Schmitt Trigger input, serving as Timer0 external clock input (T0CKI) or Comparator 1 output (C1OUT). |
| 7 | RA5/AN4/SS/HLVDIN/C2OUT | bidirectional | Digital I/O with analog input 4, SPI slave select input (SS), High/Low-Voltage Detect input (HLVDIN), or Comparator 2 output (C2OUT). |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (OSC1/CLKI); in internal oscillator modes this pin is general purpose I/O RA7. |
| 10 | OSC2/CLKO/RA6 | output | Oscillator crystal output, or CLKO (FOSC/4) output in RC mode; in RCIO, INTIO2 and ECIO modes this pin is general purpose I/O RA6. |
| 11 | RC0/T1OSO/T13CKI | bidirectional | Digital I/O with Schmitt Trigger input, serving as Timer1 oscillator output (T1OSO) or Timer1/Timer3 external clock input (T13CKI). |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O with Timer1 oscillator input (T1OSI) or CCP2 capture input/compare and PWM output (default CCP2 assignment when CCP2MX is set). |
| 13 | RC2/CCP1 | bidirectional | Digital I/O with Capture 1 input, Compare 1 output or PWM 1 output (CCP1). |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O with synchronous serial clock input/output for SPI mode (SCK) or I2C mode (SCL). |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O with SPI data input (SDI) or I2C data I/O (SDA). |
| 16 | RC5/SDO | bidirectional | Digital I/O with SPI data output (SDO). |
| 17 | RC6/TX/CK | bidirectional | Digital I/O with EUSART asynchronous transmit (TX) or EUSART synchronous clock (CK). |
| 18 | RC7/RX/DT | bidirectional | Digital I/O with EUSART asynchronous receive (RX) or EUSART synchronous data (DT). |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT0/FLT0/AN12 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, external interrupt 0 (INT0), PWM Fault input for CCP1 (FLT0), or analog input 12. |
| 22 | RB1/INT1/AN10 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, external interrupt 1 (INT1), or analog input 10. |
| 23 | RB2/INT2/AN8 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, external interrupt 2 (INT2), or analog input 8. |
| 24 | RB3/AN9/CCP2 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, analog input 9, or CCP2 capture input/compare and PWM output (alternate CCP2 assignment when CCP2MX is cleared). |
| 25 | RB4/KBI0/AN11 | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI0, or analog input 11. |
| 26 | RB5/KBI1/PGM | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI1, or low-voltage ICSP programming enable pin (PGM). |
| 27 | RB6/KBI2/PGC | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI2, or ICSP/ICD programming clock pin (PGC). |
| 28 | RB7/KBI3/PGD | bidirectional | Digital I/O with weak pull-up when RBPU is cleared, interrupt-on-change pin KBI3, or ICSP/ICD programming data pin (PGD). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0000) | 2.06 | 2.17 | 2.28 | V | LVV = 0000; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0001) | 2.12 | 2.23 | 2.34 | V | LVV = 0001; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0010) | 2.24 | 2.36 | 2.48 | V | LVV = 0010; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0011) | 2.32 | 2.44 | 2.56 | V | LVV = 0011; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0100) | 2.47 | 2.6 | 2.73 | V | LVV = 0100; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0101) | 2.65 | 2.79 | 2.93 | V | LVV = 0101; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0110) | 2.74 | 2.89 | 3.04 | V | LVV = 0110; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 0111) | 2.96 | 3.12 | 3.28 | V | LVV = 0111; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1000) | 3.22 | 3.39 | 3.56 | V | LVV = 1000; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1001) | 3.37 | 3.55 | 3.73 | V | LVV = 1001; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1010) | 3.52 | 3.71 | 3.9 | V | LVV = 1010; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1011) | 3.7 | 3.9 | 4.1 | V | LVV = 1011; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1100) | 3.9 | 4.11 | 4.32 | V | LVV = 1100; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1101) | 4.11 | 4.33 | 4.55 | V | LVV = 1101; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| D420 HLVD Voltage on VDD Transition High to Low (LVV = 1110) | 4.36 | 4.59 | 4.82 | V | LVV = 1110; Standard Operating Conditions, -40°C ≤ TA ≤ +85°C (industrial) | 328 | |
| Operating VDD range, low-voltage (PIC18LF) devices | VDD | 2 | 5.5 | V | PIC18LF (LF) low-voltage devices; stated in Section 1.3 text, not a table row | 8 |
CAD (KiCad official)
- Symbol:
PIC18LF2515-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic18lf2515-i-so-etched.step/pic18lf2515-i-so-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18lf2515-i-so.step/pic18lf2515-i-so.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (376 pp, sha256
58bdc0dc5321bdfe, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).