Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SIT8208AI-21-33E-50.000000Y

SiTime · Pre-programmed Oscillators · SMD3225-4P

SIT8208AI-21-33E-50.000000Y from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST input Output enable or standby control (OE or ST per ordering code); H or open gives specified frequency output, L disables output (high impedance in OE mode, weakly pulled low and sleep mode with supply current reduced to I_std in ST mode), with VIH min 70% Vdd and VIL max 30% Vdd.
2 GND power_in Electrical ground; a 0.1 µF capacitor between Vdd and GND is recommended.
3 OUT output Oscillator LVCMOS/LVTTL output, 1 to 80 MHz.
4 VDD power_in Power supply voltage (3.3V ±10% for the -33 option, 2.97 to 3.63 V); a 0.1 µF capacitor between Vdd and GND is recommended.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystals/Oscillators/Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency (nominal for this MPN) f 50 MHz MPN frequency 50.000000 10
Output Frequency Range f 1 80 MHz 1
Frequency Stability F_stab -20 20 PPM Inclusive of initial tolerance at 25 °C, and variations over operating temperature, rated power supply voltage and load 1
First year Aging F_aging -1.5 1.5 PPM 25°C 1
10-year Aging -5 5 PPM 25°C 1
Operating Temperature Range T_use -40 85 °C Industrial 1
Supply Voltage Vdd 2.97 3.3 3.63 V 1
Current Consumption Idd 31 33 mA No load condition, f = 20 MHz, Vdd = 2.5V, 2.8V or 3.3V 1
OE Disable Current I_OD 31 mA Vdd = 2.5V, 2.8V or 3.3V, OE = GND, output is Weakly Pulled Down 1
Standby Current I_std 70 µA Vdd = 2.5V, 2.8V or 3.3V, ST = GND, output is Weakly Pulled Down 1
Duty Cycle DC 45 55 % 1
Rise/Fall Time Tr, Tf 1.2 2 ns 15 pF load, 10% - 90% Vdd 1
Output Voltage Low VOL 0.1 Vdd IOH = -6 mA, IOL = 6 mA, (Vdd = 3.3V, 2.8V, 2.5V); printed as 10% Vdd 1
Input Pull-up Impedance Z_in 100 250 kΩ Pin 1, OE logic high or logic low, or ST logic high 1
Input Pull-up Impedance (ST low) Z_in 2 MΩ Pin 1, ST logic low 1
Startup Time T_start 7 10 ms Measured from the time Vdd reaches its rated minimum value 2
OE Enable/Disable Time T_oe 150 ns f = 80 MHz, For other frequencies, T_oe = 100 ns + 3 cycles 2
Resume Time T_resume 6 10 ms In standby mode, measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.5 2 ps 2
RMS Phase Jitter (random) T_phj 0.5 1 ps f = 10 MHz, Integration bandwidth = 12 kHz to 20 MHz 2
Storage Temperature -65 150 °C 2
VDD VDD -0.5 4 V 2
Electrostatic Discharge 2000 V 2
Soldering Temperature 260 °C follow standard Pb free soldering guidelines 2
Junction Temperature 150 °C 2
Thermal Resistance JA, 4 Layer Board θJA 109 °C/W 3225 package 2
Thermal Resistance JA, 2 Layer Board θJA 212 °C/W 3225 package 2
Thermal Resistance JC, Bottom θJC 27 °C/W 3225 package 2

CAD (KiCad official)

  • Symbol: SIT8208AI-21-33E-50.000000Y
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit8208ai-21-33e-50-000000y-etched.step / sit8208ai-21-33e-50-000000y-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8208ai-21-33e-50-000000y.step / sit8208ai-21-33e-50-000000y.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (15 pp, sha256 a36367f4cb66a811, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF