3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8208AI-21-33E-50.000000Y
SiTime · Pre-programmed Oscillators · SMD3225-4P
SIT8208AI-21-33E-50.000000Y from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST | input | Output enable or standby control (OE or ST per ordering code); H or open gives specified frequency output, L disables output (high impedance in OE mode, weakly pulled low and sleep mode with supply current reduced to I_std in ST mode), with VIH min 70% Vdd and VIL max 30% Vdd. |
| 2 | GND | power_in | Electrical ground; a 0.1 µF capacitor between Vdd and GND is recommended. |
| 3 | OUT | output | Oscillator LVCMOS/LVTTL output, 1 to 80 MHz. |
| 4 | VDD | power_in | Power supply voltage (3.3V ±10% for the -33 option, 2.97 to 3.63 V); a 0.1 µF capacitor between Vdd and GND is recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals/Oscillators/Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Frequency (nominal for this MPN) | f | 50 | MHz | MPN frequency 50.000000 | 10 | ||
| Output Frequency Range | f | 1 | 80 | MHz | 1 | ||
| Frequency Stability | F_stab | -20 | 20 | PPM | Inclusive of initial tolerance at 25 °C, and variations over operating temperature, rated power supply voltage and load | 1 | |
| First year Aging | F_aging | -1.5 | 1.5 | PPM | 25°C | 1 | |
| 10-year Aging | -5 | 5 | PPM | 25°C | 1 | ||
| Operating Temperature Range | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage | Vdd | 2.97 | 3.3 | 3.63 | V | 1 | |
| Current Consumption | Idd | 31 | 33 | mA | No load condition, f = 20 MHz, Vdd = 2.5V, 2.8V or 3.3V | 1 | |
| OE Disable Current | I_OD | 31 | mA | Vdd = 2.5V, 2.8V or 3.3V, OE = GND, output is Weakly Pulled Down | 1 | ||
| Standby Current | I_std | 70 | µA | Vdd = 2.5V, 2.8V or 3.3V, ST = GND, output is Weakly Pulled Down | 1 | ||
| Duty Cycle | DC | 45 | 55 | % | 1 | ||
| Rise/Fall Time | Tr, Tf | 1.2 | 2 | ns | 15 pF load, 10% - 90% Vdd | 1 | |
| Output Voltage Low | VOL | 0.1 | Vdd | IOH = -6 mA, IOL = 6 mA, (Vdd = 3.3V, 2.8V, 2.5V); printed as 10% Vdd | 1 | ||
| Input Pull-up Impedance | Z_in | 100 | 250 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 1 | |
| Input Pull-up Impedance (ST low) | Z_in | 2 | MΩ | Pin 1, ST logic low | 1 | ||
| Startup Time | T_start | 7 | 10 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | |
| OE Enable/Disable Time | T_oe | 150 | ns | f = 80 MHz, For other frequencies, T_oe = 100 ns + 3 cycles | 2 | ||
| Resume Time | T_resume | 6 | 10 | ms | In standby mode, measured from the time ST pin crosses 50% threshold | 2 | |
| RMS Period Jitter | T_jitt | 1.5 | 2 | ps | 2 | ||
| RMS Phase Jitter (random) | T_phj | 0.5 | 1 | ps | f = 10 MHz, Integration bandwidth = 12 kHz to 20 MHz | 2 | |
| Storage Temperature | -65 | 150 | °C | 2 | |||
| VDD | VDD | -0.5 | 4 | V | 2 | ||
| Electrostatic Discharge | 2000 | V | 2 | ||||
| Soldering Temperature | 260 | °C | follow standard Pb free soldering guidelines | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Thermal Resistance JA, 4 Layer Board | θJA | 109 | °C/W | 3225 package | 2 | ||
| Thermal Resistance JA, 2 Layer Board | θJA | 212 | °C/W | 3225 package | 2 | ||
| Thermal Resistance JC, Bottom | θJC | 27 | °C/W | 3225 package | 2 |
CAD (KiCad official)
- Symbol:
SIT8208AI-21-33E-50.000000Y - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit8208ai-21-33e-50-000000y-etched.step/sit8208ai-21-33e-50-000000y-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8208ai-21-33e-50-000000y.step/sit8208ai-21-33e-50-000000y.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (15 pp, sha256
a36367f4cb66a811, retrieved 2026-10-26, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).