Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC6908CS6-1#TRPBF

Analog Devices · Timers / Clock Oscillators · TSOT-23-6L

LTC6908CS6-1#TRPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Voltage supply (2.7V ≤ V+ ≤ 5.5V) that must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1µF capacitor.
2 GND power_in Ground, which should be tied to a ground plane for best performance.
3 SET passive Frequency-setting resistor input; the resistor (20k to 400k recommended) connects between this pin and V+, the pin is held about 1.1V below V+, and its capacitance should be limited to less than 10pF.
4 MOD input Three-state modulation-setting input: GND selects fOUT/16, floating selects fOUT/32 (bypass with 1nF to ground), V+ selects fOUT/64, and tying an output to MOD turns modulation off.
5 OUT2 output Rail-to-rail oscillator output that can drive 5k and/or 10pF loads, with larger loads possibly causing inaccuracies due to supply bounce at high frequencies.
6 OUT1 output Rail-to-rail oscillator output that can drive 5k and/or 10pF loads, 180° out of phase with OUT2 on the LTC6908-1.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6L
Category Clock and Timing
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency Accuracy ΔfOUT -1.5 1.5 % V+ = 2.7V, 250kHz ≤ fOUT ≤ 5MHz, TA = 25°C 3
Frequency Accuracy ΔfOUT -2.5 2.5 % V+ = 2.7V, 250kHz ≤ fOUT ≤ 5MHz, full temperature range 3
Frequency Accuracy ΔfOUT -3.5 3.5 % V+ = 2.7V, 50kHz ≤ fOUT < 250kHz, full temperature range 3
Frequency Accuracy ΔfOUT -2 2 % V+ = 5V, 250kHz ≤ fOUT ≤ 5MHz, TA = 25°C 3
Frequency Accuracy ΔfOUT -3 3 % V+ = 5V, 250kHz ≤ fOUT ≤ 5MHz, full temperature range 3
Frequency Accuracy ΔfOUT -4 4 % V+ = 5V, 50kHz ≤ fOUT < 250kHz, full temperature range 3
Frequency Accuracy ΔfOUT -4.5 4.5 % V+ = 5V, 5MHz < fOUT ≤ 10MHz, full temperature range 3
Frequency Drift Over Temperature ΔfOUT/ΔT 0.004 %/°C RSET = 100k, ± as printed 3
Frequency Drift Over Supply ΔfOUT/ΔV+ 0.04 0.25 %/V V+ = 2.7V to 3.6V, RSET = 100k 3
Frequency Drift Over Supply ΔfOUT/ΔV+ 0.4 0.9 %/V V+ = 4.5V to 5.5V, RSET = 100k 3
Period Variation (Frequency Spreading) 7.5 10 12.5 % RSET = 100k, MOD Pin = V+, GND or OPEN (printed ±) 3
Long-Term Stability of Output Frequency 300 ppm/√kHr 3
Duty Cycle 45 50 55 % No Modulation, 250kHz ≤ fOUT ≤ 1MHz 3
V+ Operating Supply Range V+ 2.7 5.5 V 3
Power Supply Current IS 0.4 0.65 mA RSET = 2000k, RL = ∞, fOUT = 50kHz, MOD Pin = V+, V+ = 5V 3
Power Supply Current IS 0.4 0.6 mA RSET = 2000k, RL = ∞, fOUT = 50kHz, MOD Pin = V+, V+ = 2.7V 3
Power Supply Current IS 1.25 1.7 mA RSET = 20k, RL = ∞, fOUT = 5MHz, MOD Pin = GND, V+ = 5V 3
Power Supply Current IS 0.9 1.3 mA RSET = 20k, RL = ∞, fOUT = 5MHz, MOD Pin = GND, V+ = 2.7V 3
Low Level MOD Input Voltage VIL_MOD 0.4 V 4
MOD Pin Input Current IMOD -4 -2 µA MOD Pin = V+, V+ = 5V 4
MOD Pin Input Current IMOD 2 4 µA MOD Pin = GND, V+ = 5V 4
High Level Output Voltage VOH 4.75 4.9 V V+ = 5V, IOH = -0.3mA 4
High Level Output Voltage VOH 4.4 4.7 V V+ = 5V, IOH = -1.2mA 4
High Level Output Voltage VOH 2.35 2.6 V V+ = 2.7V, IOH = -0.3mA 4
High Level Output Voltage VOH 1.85 2.2 V V+ = 2.7V, IOH = -0.8mA 4
Low Level Output Voltage VOL 0.05 0.15 V V+ = 5V, IOL = 0.3mA 4
Low Level Output Voltage VOL 0.2 0.5 V V+ = 5V, IOL = 1.2mA 4
Low Level Output Voltage VOL 0.1 0.3 V V+ = 2.7V, IOL = 0.3mA 4
Low Level Output Voltage VOL 0.4 0.7 V V+ = 2.7V, IOL = 0.8mA 4
Output Rise Time tr 6 ns V+ = 5V 4
Output Rise Time tr 11 ns V+ = 2.7V 4
Output Fall Time tf 5 ns V+ = 5V 4
Output Fall Time tf 9 ns V+ = 2.7V 4
Total Supply Voltage V+ 6 V V+ to GND 2
Operating Temperature Range -40 85 °C LTC6908CS6-1 2
Specified Temperature Range 0 70 °C LTC6908CS6-1 2
Storage Temperature Range -65 150 °C S6 2
Lead Temperature 300 °C Soldering, 10sec 2
Junction Temperature TJMAX 150 °C S6 package 2
Thermal Resistance Junction to Ambient θJA 230 °C/W S6 package 2

CAD (KiCad official)

  • Symbol: LTC6908CS6-1#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: ltc6908cs6-1-trpbf-etched.step / ltc6908cs6-1-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc6908cs6-1-trpbf.step / ltc6908cs6-1-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 bfbb430426a3ac82, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF