Generated by kicad-footprint-generator · KiCad file format 20260206
LTC6908CS6-1#TRPBF
Analog Devices · Timers / Clock Oscillators · TSOT-23-6L
LTC6908CS6-1#TRPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Voltage supply (2.7V ≤ V+ ≤ 5.5V) that must be kept free from noise and ripple and bypassed directly to a ground plane with a 0.1µF capacitor. |
| 2 | GND | power_in | Ground, which should be tied to a ground plane for best performance. |
| 3 | SET | passive | Frequency-setting resistor input; the resistor (20k to 400k recommended) connects between this pin and V+, the pin is held about 1.1V below V+, and its capacitance should be limited to less than 10pF. |
| 4 | MOD | input | Three-state modulation-setting input: GND selects fOUT/16, floating selects fOUT/32 (bypass with 1nF to ground), V+ selects fOUT/64, and tying an output to MOD turns modulation off. |
| 5 | OUT2 | output | Rail-to-rail oscillator output that can drive 5k and/or 10pF loads, with larger loads possibly causing inaccuracies due to supply bounce at high frequencies. |
| 6 | OUT1 | output | Rail-to-rail oscillator output that can drive 5k and/or 10pF loads, 180° out of phase with OUT2 on the LTC6908-1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Clock and Timing |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Accuracy | ΔfOUT | -1.5 | 1.5 | % | V+ = 2.7V, 250kHz ≤ fOUT ≤ 5MHz, TA = 25°C | 3 | |
| Frequency Accuracy | ΔfOUT | -2.5 | 2.5 | % | V+ = 2.7V, 250kHz ≤ fOUT ≤ 5MHz, full temperature range | 3 | |
| Frequency Accuracy | ΔfOUT | -3.5 | 3.5 | % | V+ = 2.7V, 50kHz ≤ fOUT < 250kHz, full temperature range | 3 | |
| Frequency Accuracy | ΔfOUT | -2 | 2 | % | V+ = 5V, 250kHz ≤ fOUT ≤ 5MHz, TA = 25°C | 3 | |
| Frequency Accuracy | ΔfOUT | -3 | 3 | % | V+ = 5V, 250kHz ≤ fOUT ≤ 5MHz, full temperature range | 3 | |
| Frequency Accuracy | ΔfOUT | -4 | 4 | % | V+ = 5V, 50kHz ≤ fOUT < 250kHz, full temperature range | 3 | |
| Frequency Accuracy | ΔfOUT | -4.5 | 4.5 | % | V+ = 5V, 5MHz < fOUT ≤ 10MHz, full temperature range | 3 | |
| Frequency Drift Over Temperature | ΔfOUT/ΔT | 0.004 | %/°C | RSET = 100k, ± as printed | 3 | ||
| Frequency Drift Over Supply | ΔfOUT/ΔV+ | 0.04 | 0.25 | %/V | V+ = 2.7V to 3.6V, RSET = 100k | 3 | |
| Frequency Drift Over Supply | ΔfOUT/ΔV+ | 0.4 | 0.9 | %/V | V+ = 4.5V to 5.5V, RSET = 100k | 3 | |
| Period Variation (Frequency Spreading) | 7.5 | 10 | 12.5 | % | RSET = 100k, MOD Pin = V+, GND or OPEN (printed ±) | 3 | |
| Long-Term Stability of Output Frequency | 300 | ppm/√kHr | 3 | ||||
| Duty Cycle | 45 | 50 | 55 | % | No Modulation, 250kHz ≤ fOUT ≤ 1MHz | 3 | |
| V+ Operating Supply Range | V+ | 2.7 | 5.5 | V | 3 | ||
| Power Supply Current | IS | 0.4 | 0.65 | mA | RSET = 2000k, RL = ∞, fOUT = 50kHz, MOD Pin = V+, V+ = 5V | 3 | |
| Power Supply Current | IS | 0.4 | 0.6 | mA | RSET = 2000k, RL = ∞, fOUT = 50kHz, MOD Pin = V+, V+ = 2.7V | 3 | |
| Power Supply Current | IS | 1.25 | 1.7 | mA | RSET = 20k, RL = ∞, fOUT = 5MHz, MOD Pin = GND, V+ = 5V | 3 | |
| Power Supply Current | IS | 0.9 | 1.3 | mA | RSET = 20k, RL = ∞, fOUT = 5MHz, MOD Pin = GND, V+ = 2.7V | 3 | |
| Low Level MOD Input Voltage | VIL_MOD | 0.4 | V | 4 | |||
| MOD Pin Input Current | IMOD | -4 | -2 | µA | MOD Pin = V+, V+ = 5V | 4 | |
| MOD Pin Input Current | IMOD | 2 | 4 | µA | MOD Pin = GND, V+ = 5V | 4 | |
| High Level Output Voltage | VOH | 4.75 | 4.9 | V | V+ = 5V, IOH = -0.3mA | 4 | |
| High Level Output Voltage | VOH | 4.4 | 4.7 | V | V+ = 5V, IOH = -1.2mA | 4 | |
| High Level Output Voltage | VOH | 2.35 | 2.6 | V | V+ = 2.7V, IOH = -0.3mA | 4 | |
| High Level Output Voltage | VOH | 1.85 | 2.2 | V | V+ = 2.7V, IOH = -0.8mA | 4 | |
| Low Level Output Voltage | VOL | 0.05 | 0.15 | V | V+ = 5V, IOL = 0.3mA | 4 | |
| Low Level Output Voltage | VOL | 0.2 | 0.5 | V | V+ = 5V, IOL = 1.2mA | 4 | |
| Low Level Output Voltage | VOL | 0.1 | 0.3 | V | V+ = 2.7V, IOL = 0.3mA | 4 | |
| Low Level Output Voltage | VOL | 0.4 | 0.7 | V | V+ = 2.7V, IOL = 0.8mA | 4 | |
| Output Rise Time | tr | 6 | ns | V+ = 5V | 4 | ||
| Output Rise Time | tr | 11 | ns | V+ = 2.7V | 4 | ||
| Output Fall Time | tf | 5 | ns | V+ = 5V | 4 | ||
| Output Fall Time | tf | 9 | ns | V+ = 2.7V | 4 | ||
| Total Supply Voltage | V+ | 6 | V | V+ to GND | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | LTC6908CS6-1 | 2 | ||
| Specified Temperature Range | 0 | 70 | °C | LTC6908CS6-1 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | S6 | 2 | ||
| Lead Temperature | 300 | °C | Soldering, 10sec | 2 | |||
| Junction Temperature | TJMAX | 150 | °C | S6 package | 2 | ||
| Thermal Resistance Junction to Ambient | θJA | 230 | °C/W | S6 package | 2 |
CAD (KiCad official)
- Symbol:
LTC6908CS6-1#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
ltc6908cs6-1-trpbf-etched.step/ltc6908cs6-1-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc6908cs6-1-trpbf.step/ltc6908cs6-1-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
bfbb430426a3ac82, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).