3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMTCH1030T-I
Microchip Tech · Touch Sensors · QFN-16(3x3)
MTCH1030T-I from Microchip Tech, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2/TUNE_TX | output | Open-drain/output touch indication for Button 2, or transmit Tune data when Tune data is enabled (no OUTx pin indicates touch then); leave open if unused. |
| 2 | OUT1/TUNE_EN | output | Open-drain touch indication for Button 1, or Enable Tune Data function (no OUTx pin indicates touch when Tune data is enabled); leave open if unused. |
| 3 | EASY TUNE | input | Input that enables or disables the Easy Tune feature; connect to VDD if unused. |
| 4 | OUT0 | output | Open-drain active-low touch indication output for Button 0; leave open if unused. |
| 5 | BUTTON0 | input | Sensor electrode input for Button 0; may not be left open. |
| 6 | BUTTON1 | input | Sensor electrode input for Button 1; connect to VDD if unused. |
| 7 | BUTTON2 | input | Sensor electrode input for Button 2; connect to VDD if unused. |
| 8 | DRIVEN SHIELD | output | Shield electrode output driver; leave open if unused. |
| 9 | SINGLE-BUTTON | input | Input that enables or disables Single-Button mode (table text says Easy Tune); connect to VDD if unused. |
| 10 | CFG2 | input | Sensitivity configuration input with continuous adjustment between 0V and VDD; may not be left open. |
| 11 | CFG1 | input | Oversampling configuration input set in four bands from 0V to VDD; may not be left open. |
| 12 | CFG0 | input | Response time (measurement period) configuration input set in four bands from 0V to VDD; may not be left open. |
| 13 | VSS | power_in | Supply ground. |
| 14 | NC | unconnected | No connect. |
| 15 | NC | unconnected | No connect. |
| 16 | VDD | power_in | Power supply, operating range 2V to 5.5V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-16(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operation supply voltage | VDD | 2 | 5.5 | V | 24 | ||
| Supply ripple noise | 20 | mV p-p | 24 | ||||
| VDD rise rate | SVDD | 0.05 | V/ms | 24 | |||
| Operating temperature range | T | -40 | 85 | °C | Standard temperature range | 24 | |
| Storage temperature | TStorage | -65 | 150 | °C | 24 | ||
| Pin voltage to GND | VPin | -0.3 | V | Max is VDD + 0.3 V | 24 | ||
| I/O pin sink/source current | IPin | 25 | mA | ±25 mA | 24 | ||
| I/O pin drive strength (low) | VOL | 0.6 | V | IOL = 10 mA, VDD = 3.0V | 25 | ||
| Input low voltage, Schmitt Trigger | VIL | 0.2 | V | 1.8V ≤ VDD ≤ 5.5V; max 0.2 VDD | 25 | ||
| Input high voltage, Schmitt Trigger | VIH | 0.8 | V | 1.8V ≤ VDD ≤ 5.5V; min 0.8 VDD | 25 | ||
| Sensor electrode capacitance | CX | 1 | 15 | pF | 25 |
CAD (KiCad official)
- Symbol:
MTCH1030T-I - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
mtch1030t-i-etched.step/mtch1030t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mtch1030t-i.step/mtch1030t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (47 pp, sha256
7555081c6e8d14ab, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).