main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mtch1030t-i: viewers · Ray
mtch1030t-i-etched.glb Publish 0.1.0 · Ray
mtch1030t-i-etched.step mtch1030t-i: factory component page (tier=mfr) · Ray
mtch1030t-i-hero.glb mtch1030t-i: hero GLB from the etched model (keeps the MPN mark) · Ray
mtch1030t-i-hero.overlay.json Publish 0.1.0 · Ray
mtch1030t-i.glb Publish 0.1.0 · Ray
mtch1030t-i.kicad_mod Publish 0.1.0 · Ray
mtch1030t-i.kicad_sym Publish 0.1.0 · Ray
mtch1030t-i.lbr Publish 0.1.0 · Ray
mtch1030t-i.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 17 pins · Ray

MTCH1030T-I

Microchip Tech · Touch Sensors · QFN-16(3x3)

MTCH1030T-I from Microchip Tech, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT2/TUNE_TX output Open-drain/output touch indication for Button 2, or transmit Tune data when Tune data is enabled (no OUTx pin indicates touch then); leave open if unused.
2 OUT1/TUNE_EN output Open-drain touch indication for Button 1, or Enable Tune Data function (no OUTx pin indicates touch when Tune data is enabled); leave open if unused.
3 EASY TUNE input Input that enables or disables the Easy Tune feature; connect to VDD if unused.
4 OUT0 output Open-drain active-low touch indication output for Button 0; leave open if unused.
5 BUTTON0 input Sensor electrode input for Button 0; may not be left open.
6 BUTTON1 input Sensor electrode input for Button 1; connect to VDD if unused.
7 BUTTON2 input Sensor electrode input for Button 2; connect to VDD if unused.
8 DRIVEN SHIELD output Shield electrode output driver; leave open if unused.
9 SINGLE-BUTTON input Input that enables or disables Single-Button mode (table text says Easy Tune); connect to VDD if unused.
10 CFG2 input Sensitivity configuration input with continuous adjustment between 0V and VDD; may not be left open.
11 CFG1 input Oversampling configuration input set in four bands from 0V to VDD; may not be left open.
12 CFG0 input Response time (measurement period) configuration input set in four bands from 0V to VDD; may not be left open.
13 VSS power_in Supply ground.
14 NC unconnected No connect.
15 NC unconnected No connect.
16 VDD power_in Power supply, operating range 2V to 5.5V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operation supply voltage VDD 2 5.5 V 24
Supply ripple noise 20 mV p-p 24
VDD rise rate SVDD 0.05 V/ms 24
Operating temperature range T -40 85 °C Standard temperature range 24
Storage temperature TStorage -65 150 °C 24
Pin voltage to GND VPin -0.3 V Max is VDD + 0.3 V 24
I/O pin sink/source current IPin 25 mA ±25 mA 24
I/O pin drive strength (low) VOL 0.6 V IOL = 10 mA, VDD = 3.0V 25
Input low voltage, Schmitt Trigger VIL 0.2 V 1.8V ≤ VDD ≤ 5.5V; max 0.2 VDD 25
Input high voltage, Schmitt Trigger VIH 0.8 V 1.8V ≤ VDD ≤ 5.5V; min 0.8 VDD 25
Sensor electrode capacitance CX 1 15 pF 25

CAD (KiCad official)

  • Symbol: MTCH1030T-I
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: mtch1030t-i-etched.step / mtch1030t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mtch1030t-i.step / mtch1030t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (47 pp, sha256 7555081c6e8d14ab, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF