3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT8610AIMSE-5#PBF
Analog Devices · DC-DC Converters · MSOP-16-EP
LT8610AIMSE-5#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SYNC | input | External clock synchronization input that must not be left floating; apply a DC voltage of 3V or higher, or tie to INTVCC for pulse-skipping mode. |
| 2 | TR/SS | passive | Output tracking and soft-start pin with an internal 2.2µA pull-up from INTVCC; a TR/SS voltage below 0.97V makes FB track it, and an internal 230Ω pull-down acts during shutdown and faults. |
| 3 | RT | passive | A resistor from RT to ground sets the switching frequency. |
| 4 | EN/UV | input | Shuts the regulator down when low and enables it when high, with a hysteretic threshold of 1.00V rising and 0.96V falling; tie to VIN if the shutdown feature is unused. |
| 5 | VIN | power_in | Supplies the internal circuitry and internal topside power switch; tie together with pin 6 and bypass locally. |
| 6 | VIN | power_in | Supplies the internal circuitry and internal topside power switch; tie together with pin 5 and bypass locally. |
| 7 | NC | unconnected | No connect; not connected to internal circuitry. |
| 8 | GND | power_in | Ground return path of the internal bottom-side switch; tie together with the exposed pad and place close to the input capacitor negative terminal. |
| 9 | SW | power_out | Output of the internal power switches; tie together with pins 10 and 11 and connect to the inductor and boost capacitor, keeping the node small on the PCB. |
| 10 | SW | power_out | Output of the internal power switches; tie together with pins 9 and 11 and connect to the inductor and boost capacitor. |
| 11 | SW | power_out | Output of the internal power switches; tie together with pins 9 and 10 and connect to the inductor and boost capacitor. |
| 12 | BST | power_in | Provides a drive voltage higher than the input voltage to the topside power switch; place a 0.1µF boost capacitor as close as possible to the IC. |
| 13 | INTVCC | power_out | Internal 3.4V regulator bypass pin with maximum output current of 20mA; decouple with at least a 1µF low ESR ceramic capacitor and do not load externally. |
| 14 | BIAS | power_in | Internal regulator draws current from BIAS instead of VIN when BIAS is above 3.1V; for outputs of 3.3V and above, tie to VOUT. |
| 15 | PG | output | Open-drain power-good output that stays low until FB is within ±9% of the final regulation voltage with no faults, and is valid when VIN is above 3.4V. |
| 16 | VOUT | input | For the -5 version, regulates the VOUT pin to 5V through an internal 12.5MΩ feedback divider that programs the fixed output. |
| 17 | GND | power_in | Exposed pad is ground and must be soldered to the PCB to lower the thermal resistance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT8610A-5) | VOUT | 4.97 | 5 | 5.03 | V | VIN = 8V, ILOAD = 0.5A | 3 |
| Output Voltage (LT8610A-5) full temperature range | VOUT | 4.94 | 5 | 5.06 | V | VIN = 8V, ILOAD = 0.5A, full operating temperature range | 3 |
| Voltage Line Regulation (LT8610A-5) | 0.004 | 0.02 | %/V | VIN = 6V to 42V, ILOAD = 1A | 3 | ||
| VIN Quiescent Current | IQ | 1 | 3 | µA | VEN/UV = 0V | 3 | |
| VIN Quiescent Current full temperature range | IQ | 1 | 8 | µA | VEN/UV = 0V, full operating temperature range | 3 | |
| VIN Quiescent Current, not switching | IQ | 1.7 | 4 | µA | VEN/UV = 2V, Not Switching, VSYNC = 0V | 3 | |
| VIN Quiescent Current, not switching full temperature range | IQ | 1.7 | 10 | µA | VEN/UV = 2V, Not Switching, VSYNC = 0V, full operating temperature range | 3 | |
| VIN Quiescent Current, pulse-skipping | IQ | 0.26 | 0.5 | mA | VEN/UV = 2V, Not Switching, VSYNC = 2V | 3 | |
| Oscillator Frequency | fSW | 665 | 700 | 735 | kHz | RT = 60.4k, ILOAD = 1A | 4 |
| INTVCC Undervoltage Lockout | 2.5 | 2.6 | 2.7 | V | 4 | ||
| Minimum On-Time | tON(MIN) | 15 | 30 | 45 | ns | ILOAD = 1A, SYNC = 0V | 4 |
| Minimum On-Time (SYNC high) | tON(MIN) | 15 | 30 | 45 | ns | ILOAD = 1A, SYNC = 3.3V | 4 |
| Top Power NMOS Current Limit (LT8610A) | ILIM | 5 | 6.7 | 8 | A | 4 | |
| Bottom Power NMOS Current Limit | 3.4 | 4.3 | 5.4 | A | VINTVCC = 3.4V | 4 | |
| SW Leakage Current | -1.5 | 1.5 | µA | VIN = 42V, VSW = 0V, 42V | 4 | ||
| EN/UV Pin Threshold | 0.94 | 1 | 1.06 | V | EN/UV Rising | 4 | |
| EN/UV Pin Current | -20 | 20 | nA | VEN/UV = 2V | 4 | ||
| PG Upper Threshold Offset from VFB | 6 | 9 | 12 | % | VFB Falling | 4 | |
| PG Lower Threshold Offset from VFB | -12 | -9 | -6 | % | VFB Rising | 4 | |
| PG Leakage | -40 | 40 | nA | VPG = 3.3V | 4 | ||
| SYNC Threshold falling | 0.8 | 1.1 | 1.4 | V | SYNC Falling | 4 | |
| SYNC Threshold rising | 1.6 | 2 | 2.4 | V | SYNC Rising | 4 | |
| SYNC Pin Current | -40 | 40 | nA | VSYNC = 6V | 4 | ||
| TR/SS Source Current | 1 | 2 | 3.2 | µA | 4 | ||
| Absolute Maximum VIN, EN/UV, PG | VIN | 42 | V | 2 | |||
| Absolute Maximum BST Pin Above SW Pin | VBST-SW | 4 | V | 2 | |||
| Absolute Maximum FB, TR/SS, RT, INTVCC | 4 | V | 2 | ||||
| Absolute Maximum VOUT, SYNC Voltage | 6 | V | 2 | ||||
| Operating Junction Temperature Range (LT8610AI) | TJ | -40 | 125 | °C | LT8610AI/LT8610ABI | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Internal Feedback Resistor Divider (LT8610A-5) | 12.5 | MΩ | 4 | ||||
| Top Power NMOS On-Resistance | RDS(ON) | 120 | mΩ | ISW = 1A | 4 | ||
| Bottom Power NMOS On-Resistance | RDS(ON) | 65 | mΩ | VINTVCC = 3.4V, ISW = 1A | 4 | ||
| EN/UV Pin Hysteresis | 40 | mV | 4 | ||||
| PG Hysteresis | 1.3 | % | 4 | ||||
| TR/SS Pull-Down Resistance | 230 | Ω | Fault Condition, TR/SS = 0.1V | 4 | |||
| Thermal Resistance Junction-to-Ambient (MSE) | θJA | 40 | °C/W | 2 | |||
| Thermal Resistance Junction-to-Case (Exposed Pad) | θJC(PAD) | 10 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT8610AIMSE-5#PBF - Footprint:
Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm - 3D model: MSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
lt8610aimse-5-pbf-etched.step/lt8610aimse-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8610aimse-5-pbf.step/lt8610aimse-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
b37433c4b3415525, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).