main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8610aimse-5-pbf: viewers · Ray
lt8610aimse-5-pbf-etched.glb Publish 0.1.0 · Ray
lt8610aimse-5-pbf-etched.step lt8610aimse-5-pbf: factory component page (tier=mfr) · Ray
lt8610aimse-5-pbf-hero.glb lt8610aimse-5-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8610aimse-5-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt8610aimse-5-pbf.glb Publish 0.1.0 · Ray
lt8610aimse-5-pbf.kicad_mod Publish 0.1.0 · Ray
lt8610aimse-5-pbf.kicad_sym Publish 0.1.0 · Ray
lt8610aimse-5-pbf.lbr Publish 0.1.0 · Ray
lt8610aimse-5-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT8610AIMSE-5#PBF

Analog Devices · DC-DC Converters · MSOP-16-EP

LT8610AIMSE-5#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SYNC input External clock synchronization input that must not be left floating; apply a DC voltage of 3V or higher, or tie to INTVCC for pulse-skipping mode.
2 TR/SS passive Output tracking and soft-start pin with an internal 2.2µA pull-up from INTVCC; a TR/SS voltage below 0.97V makes FB track it, and an internal 230Ω pull-down acts during shutdown and faults.
3 RT passive A resistor from RT to ground sets the switching frequency.
4 EN/UV input Shuts the regulator down when low and enables it when high, with a hysteretic threshold of 1.00V rising and 0.96V falling; tie to VIN if the shutdown feature is unused.
5 VIN power_in Supplies the internal circuitry and internal topside power switch; tie together with pin 6 and bypass locally.
6 VIN power_in Supplies the internal circuitry and internal topside power switch; tie together with pin 5 and bypass locally.
7 NC unconnected No connect; not connected to internal circuitry.
8 GND power_in Ground return path of the internal bottom-side switch; tie together with the exposed pad and place close to the input capacitor negative terminal.
9 SW power_out Output of the internal power switches; tie together with pins 10 and 11 and connect to the inductor and boost capacitor, keeping the node small on the PCB.
10 SW power_out Output of the internal power switches; tie together with pins 9 and 11 and connect to the inductor and boost capacitor.
11 SW power_out Output of the internal power switches; tie together with pins 9 and 10 and connect to the inductor and boost capacitor.
12 BST power_in Provides a drive voltage higher than the input voltage to the topside power switch; place a 0.1µF boost capacitor as close as possible to the IC.
13 INTVCC power_out Internal 3.4V regulator bypass pin with maximum output current of 20mA; decouple with at least a 1µF low ESR ceramic capacitor and do not load externally.
14 BIAS power_in Internal regulator draws current from BIAS instead of VIN when BIAS is above 3.1V; for outputs of 3.3V and above, tie to VOUT.
15 PG output Open-drain power-good output that stays low until FB is within ±9% of the final regulation voltage with no faults, and is valid when VIN is above 3.4V.
16 VOUT input For the -5 version, regulates the VOUT pin to 5V through an internal 12.5MΩ feedback divider that programs the fixed output.
17 GND power_in Exposed pad is ground and must be soldered to the PCB to lower the thermal resistance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-16-EP
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage (LT8610A-5) VOUT 4.97 5 5.03 V VIN = 8V, ILOAD = 0.5A 3
Output Voltage (LT8610A-5) full temperature range VOUT 4.94 5 5.06 V VIN = 8V, ILOAD = 0.5A, full operating temperature range 3
Voltage Line Regulation (LT8610A-5) 0.004 0.02 %/V VIN = 6V to 42V, ILOAD = 1A 3
VIN Quiescent Current IQ 1 3 µA VEN/UV = 0V 3
VIN Quiescent Current full temperature range IQ 1 8 µA VEN/UV = 0V, full operating temperature range 3
VIN Quiescent Current, not switching IQ 1.7 4 µA VEN/UV = 2V, Not Switching, VSYNC = 0V 3
VIN Quiescent Current, not switching full temperature range IQ 1.7 10 µA VEN/UV = 2V, Not Switching, VSYNC = 0V, full operating temperature range 3
VIN Quiescent Current, pulse-skipping IQ 0.26 0.5 mA VEN/UV = 2V, Not Switching, VSYNC = 2V 3
Oscillator Frequency fSW 665 700 735 kHz RT = 60.4k, ILOAD = 1A 4
INTVCC Undervoltage Lockout 2.5 2.6 2.7 V 4
Minimum On-Time tON(MIN) 15 30 45 ns ILOAD = 1A, SYNC = 0V 4
Minimum On-Time (SYNC high) tON(MIN) 15 30 45 ns ILOAD = 1A, SYNC = 3.3V 4
Top Power NMOS Current Limit (LT8610A) ILIM 5 6.7 8 A 4
Bottom Power NMOS Current Limit 3.4 4.3 5.4 A VINTVCC = 3.4V 4
SW Leakage Current -1.5 1.5 µA VIN = 42V, VSW = 0V, 42V 4
EN/UV Pin Threshold 0.94 1 1.06 V EN/UV Rising 4
EN/UV Pin Current -20 20 nA VEN/UV = 2V 4
PG Upper Threshold Offset from VFB 6 9 12 % VFB Falling 4
PG Lower Threshold Offset from VFB -12 -9 -6 % VFB Rising 4
PG Leakage -40 40 nA VPG = 3.3V 4
SYNC Threshold falling 0.8 1.1 1.4 V SYNC Falling 4
SYNC Threshold rising 1.6 2 2.4 V SYNC Rising 4
SYNC Pin Current -40 40 nA VSYNC = 6V 4
TR/SS Source Current 1 2 3.2 µA 4
Absolute Maximum VIN, EN/UV, PG VIN 42 V 2
Absolute Maximum BST Pin Above SW Pin VBST-SW 4 V 2
Absolute Maximum FB, TR/SS, RT, INTVCC 4 V 2
Absolute Maximum VOUT, SYNC Voltage 6 V 2
Operating Junction Temperature Range (LT8610AI) TJ -40 125 °C LT8610AI/LT8610ABI 2
Storage Temperature Range TSTG -65 150 °C 2
Internal Feedback Resistor Divider (LT8610A-5) 12.5 MΩ 4
Top Power NMOS On-Resistance RDS(ON) 120 mΩ ISW = 1A 4
Bottom Power NMOS On-Resistance RDS(ON) 65 mΩ VINTVCC = 3.4V, ISW = 1A 4
EN/UV Pin Hysteresis 40 mV 4
PG Hysteresis 1.3 % 4
TR/SS Pull-Down Resistance 230 Ω Fault Condition, TR/SS = 0.1V 4
Thermal Resistance Junction-to-Ambient (MSE) θJA 40 °C/W 2
Thermal Resistance Junction-to-Case (Exposed Pad) θJC(PAD) 10 °C/W 2

CAD (KiCad official)

  • Symbol: LT8610AIMSE-5#PBF
  • Footprint: Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
  • 3D model: MSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: lt8610aimse-5-pbf-etched.step / lt8610aimse-5-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8610aimse-5-pbf.step / lt8610aimse-5-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (26 pp, sha256 b37433c4b3415525, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF