main
Ray
Publish 0.1.0
e1f4a04
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248
{
"slug": "lt8610aimse-5-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lt8610aimse-5#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt8610aimse-5-pbf.kicad_sym",
"lt8610aimse-5-pbf.kicad_mod",
"lt8610aimse-5-pbf.glb",
"lt8610aimse-5-pbf.step",
"lt8610aimse-5-pbf.lbr",
"docs/hero.png",
"docs/lt8610aimse-5-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt8610aimse-5-pbf-hero.glb",
"lt8610aimse-5-pbf-hero.overlay.json",
"lt8610aimse-5-pbf-etched.glb"
],
"component": {
"mpn": "LT8610AIMSE-5#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-16-EP",
"pin_count": 17,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8610a-8610ab.pdf",
"parts": {
"symbol": "lt8610aimse-5-pbf.kicad_sym",
"footprint": "lt8610aimse-5-pbf.kicad_mod",
"model_3d": "lt8610aimse-5-pbf-hero.glb",
"model_3d_plain": "lt8610aimse-5-pbf-etched.glb",
"model_3d_step": "lt8610aimse-5-pbf-etched.step",
"model_3d_step_plain": "lt8610aimse-5-pbf.step",
"lbr": "lt8610aimse-5-pbf.lbr"
},
"distributor_links": {
"lcsc": "C674048",
"digikey": "505-LT8610AIMSE-5#PBF-ND",
"mouser": "584-LT8610AIMSE-5PBF"
},
"distributor_check": {
"checked_at": "2026-10-28T15:36:41Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT8610AIMSE-5#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT8610AIMSE-5PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SYNC",
"type": "input",
"description": "External clock synchronization input that must not be left floating; apply a DC voltage of 3V or higher, or tie to INTVCC for pulse-skipping mode."
},
{
"number": "2",
"name": "TR/SS",
"type": "passive",
"description": "Output tracking and soft-start pin with an internal 2.2µA pull-up from INTVCC; a TR/SS voltage below 0.97V makes FB track it, and an internal 230Ω pull-down acts during shutdown and faults."
},
{
"number": "3",
"name": "RT",
"type": "passive",
"description": "A resistor from RT to ground sets the switching frequency."
},
{
"number": "4",
"name": "EN/UV",
"type": "input",
"description": "Shuts the regulator down when low and enables it when high, with a hysteretic threshold of 1.00V rising and 0.96V falling; tie to VIN if the shutdown feature is unused."
},
{
"number": "5",
"name": "VIN",
"type": "power_in",
"description": "Supplies the internal circuitry and internal topside power switch; tie together with pin 6 and bypass locally."
},
{
"number": "6",
"name": "VIN",
"type": "power_in",
"description": "Supplies the internal circuitry and internal topside power switch; tie together with pin 5 and bypass locally."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "No connect; not connected to internal circuitry."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground return path of the internal bottom-side switch; tie together with the exposed pad and place close to the input capacitor negative terminal."
},
{
"number": "9",
"name": "SW",
"type": "power_out",
"description": "Output of the internal power switches; tie together with pins 10 and 11 and connect to the inductor and boost capacitor, keeping the node small on the PCB."
},
{
"number": "10",
"name": "SW",
"type": "power_out",
"description": "Output of the internal power switches; tie together with pins 9 and 11 and connect to the inductor and boost capacitor."
},
{
"number": "11",
"name": "SW",
"type": "power_out",
"description": "Output of the internal power switches; tie together with pins 9 and 10 and connect to the inductor and boost capacitor."
},
{
"number": "12",
"name": "BST",
"type": "power_in",
"description": "Provides a drive voltage higher than the input voltage to the topside power switch; place a 0.1µF boost capacitor as close as possible to the IC."
},
{
"number": "13",
"name": "INTVCC",
"type": "power_out",
"description": "Internal 3.4V regulator bypass pin with maximum output current of 20mA; decouple with at least a 1µF low ESR ceramic capacitor and do not load externally."
},
{
"number": "14",
"name": "BIAS",
"type": "power_in",
"description": "Internal regulator draws current from BIAS instead of VIN when BIAS is above 3.1V; for outputs of 3.3V and above, tie to VOUT."
},
{
"number": "15",
"name": "PG",
"type": "output",
"description": "Open-drain power-good output that stays low until FB is within ±9% of the final regulation voltage with no faults, and is valid when VIN is above 3.4V."
},
{
"number": "16",
"name": "VOUT",
"type": "input",
"description": "For the -5 version, regulates the VOUT pin to 5V through an internal 12.5MΩ feedback divider that programs the fixed output."
},
{
"number": "17",
"name": "GND",
"type": "power_in",
"description": "Exposed pad is ground and must be soldered to the PCB to lower the thermal resistance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin-function text lists pin 16 as FB for the adjustable LT8610A/LT8610AB and as VOUT f"
],
"pages_sent": 7,
"cost_usd": 0.0214,
"at": "2026-10-28T15:36:25"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8610a-8610ab.pdf",
"pages": 26,
"sha256": "b37433c4b3415525",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt8610aimse-5-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt8610aimse-5-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cc0e410bd5ee4f0caef9587a42c4426222d51b99f9447ca63d39824c48ef9718",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}