Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC9S08AC16CFJE

NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)

MC9S08AC16CFJE from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IRQ/TPMCLK input External interrupt request input (also BIH/BIL input) shared with the TPM external clock input; has internal pull device, no clamp diode to VDD so it must not exceed VDD.
2 RESET bidirectional Dedicated reset pin with internal pull-up and input hysteresis, driven low for about 34 bus cycles on any reset; no output slew control.
3 PTF4/TPM2CH0 bidirectional Port F bit 4 general-purpose I/O shared with TPM2 channel 0.
4 PTF5/TPM2CH1 bidirectional Port F bit 5 general-purpose I/O shared with TPM2 channel 1.
5 PTE0/TxD1 bidirectional Port E bit 0 general-purpose I/O shared with SCI1 transmit data.
6 PTE1/RxD1 bidirectional Port E bit 1 general-purpose I/O shared with SCI1 receive data.
7 PTE2/TPM1CH0 bidirectional Port E bit 2 general-purpose I/O shared with TPM1 channel 0.
8 PTE3/TPM1CH1 bidirectional Port E bit 3 general-purpose I/O shared with TPM1 channel 1.
9 PTE4/SS1 bidirectional Port E bit 4 general-purpose I/O shared with SPI slave select.
10 PTE5/MISO1 bidirectional Port E bit 5 general-purpose I/O shared with SPI master-in/slave-out.
11 PTE6/MOSI1 bidirectional Port E bit 6 general-purpose I/O shared with SPI master-out/slave-in.
12 PTE7/SPSCK1 bidirectional Port E bit 7 general-purpose I/O shared with SPI serial clock.
13 VSS power_in Primary ground pin for the MCU, I/O buffers and internal regulator; bypass with 0.1 uF ceramic close to VDD/VSS.
14 VDD power_in Main supply pin for the I/O buffers and internal voltage regulator; use a 0.1 uF ceramic bypass plus bulk capacitor close to the pin.
15 PTG0/KBIP0 bidirectional Port G bit 0 general-purpose I/O shared with keyboard interrupt input 0 (falling edge/low level).
16 PTG1/KBIP1 bidirectional Port G bit 1 general-purpose I/O shared with keyboard interrupt input 1 (falling edge/low level).
17 PTB0/TPM3CH0/AD1P0 bidirectional Port B bit 0 general-purpose I/O shared with TPM3 channel 0 and ADC input AD0; enabling the ADC input disables the digital function.
18 PTB1/TPM3CH1/AD1P1 bidirectional Port B bit 1 general-purpose I/O shared with TPM3 channel 1 and ADC input AD1; enabling the ADC input disables the digital function.
19 PTB2/AD1P2 bidirectional Port B bit 2 general-purpose I/O shared with ADC input AD2.
20 PTB3/AD1P3 bidirectional Port B bit 3 general-purpose I/O shared with ADC input AD3.
21 VDDAD power_in Analog supply for the ADC module, internally connected to VDD in the package; bypass with 0.1 uF ceramic close to the pin.
22 VSSAD power_in Analog ground for the ADC module, internally connected to VSS in the package; bypass with 0.1 uF ceramic close to the pin.
23 PTD2/AD1P10/KBIP5 bidirectional Port D bit 2 general-purpose I/O shared with ADC input AD10 and keyboard interrupt 5 (ADC has higher priority).
24 PTD3/AD1P11/KBIP6 bidirectional Port D bit 3 general-purpose I/O shared with ADC input AD11 and keyboard interrupt 6 (ADC has higher priority).
25 VREFH power_in ADC high reference voltage, internally connected to VDDAD in the package.
26 VREFL power_in ADC low reference voltage, internally connected to VSSAD in the package.
27 BKGD/MS bidirectional Background debug communication pin and mode select at reset; pseudo open-drain with internal pull-up, input hysteresis and no output slew control.
28 PTG5/XTAL bidirectional Port G bit 5 general-purpose I/O shared with oscillator output XTAL.
29 PTG6/EXTAL bidirectional Port G bit 6 general-purpose I/O shared with external clock/oscillator input EXTAL.
30 VSS power_in Secondary VSS pin, connected to system ground or to the primary VSS pin through a low-impedance connection.
31 PTC0/SCL1 bidirectional Port C bit 0 general-purpose I/O shared with IIC serial clock line.
32 PTC1/SDA1 bidirectional Port C bit 1 general-purpose I/O shared with IIC serial data line.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-32(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 5.8 V 258
Input voltage Vin -0.3 V maximum printed as VDD + 0.3 258
Instantaneous maximum current, single pin limit -25 25 mA single pin limit, applies to all pins 258
Maximum current at VDD IDD 120 mA 258
Storage temperature Tstg -55 150 °C 258
Maximum junction temperature TJ 150 °C 258
Operating temperature range (packaged) TA 0 70 °C TL to TH 258
Thermal resistance junction-to-ambient, 32-pin LQFP, 1s board θJA 85 °C/W 32-pin LQFP, 1s single-layer board 258
Thermal resistance junction-to-ambient, 32-pin LQFP, 2s2p board θJA 56 °C/W 32-pin LQFP, 2s2p four-layer board 258
External clock high time tclkh 1.5 tcyc temperature -40 to 125 °C 274
External clock low time tclkl 1.5 tcyc temperature -40 to 125 °C 274
External clock period tTPMext 4 tcyc temperature -40 to 125 °C 274
Input capture pulse width tICPW 1.5 tcyc temperature -40 to 125 °C 274
SPI period, master tSCK 2 2048 tcyc master 275
SPI period, slave tSCK 4 tcyc slave 275
SPI data setup time (input), master tSI(M) 30 ns master 275
SPI data setup time (input), slave tSI(S) 30 ns slave 275
SPI data hold time (input), master tHI(M) 30 ns master 275
SPI data hold time (input), slave tHI(S) 30 ns slave 275
SPI slave access time tA 0 40 ns slave 275
SPI slave disable time tdis 40 ns slave 275
SPI data setup time (output), master tSO 25 ns master 276
SPI data setup time (output), slave tSO 25 ns slave 276
SPI data hold time (output), master tHO -10 ns master 276
SPI data hold time (output), slave tHO -10 ns slave 276

CAD (KiCad official)

  • Symbol: MC9S08AC16CFJE
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: mc9s08ac16cfje-etched.step / mc9s08ac16cfje-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc9s08ac16cfje.step / mc9s08ac16cfje.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (296 pp, sha256 a02b13679de67119, retrieved 2026-11-10, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF