Generated by kicad-footprint-generator · KiCad file format 20260206
MC9S08AC16CFJE
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)
MC9S08AC16CFJE from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IRQ/TPMCLK | input | External interrupt request input (also BIH/BIL input) shared with the TPM external clock input; has internal pull device, no clamp diode to VDD so it must not exceed VDD. |
| 2 | RESET | bidirectional | Dedicated reset pin with internal pull-up and input hysteresis, driven low for about 34 bus cycles on any reset; no output slew control. |
| 3 | PTF4/TPM2CH0 | bidirectional | Port F bit 4 general-purpose I/O shared with TPM2 channel 0. |
| 4 | PTF5/TPM2CH1 | bidirectional | Port F bit 5 general-purpose I/O shared with TPM2 channel 1. |
| 5 | PTE0/TxD1 | bidirectional | Port E bit 0 general-purpose I/O shared with SCI1 transmit data. |
| 6 | PTE1/RxD1 | bidirectional | Port E bit 1 general-purpose I/O shared with SCI1 receive data. |
| 7 | PTE2/TPM1CH0 | bidirectional | Port E bit 2 general-purpose I/O shared with TPM1 channel 0. |
| 8 | PTE3/TPM1CH1 | bidirectional | Port E bit 3 general-purpose I/O shared with TPM1 channel 1. |
| 9 | PTE4/SS1 | bidirectional | Port E bit 4 general-purpose I/O shared with SPI slave select. |
| 10 | PTE5/MISO1 | bidirectional | Port E bit 5 general-purpose I/O shared with SPI master-in/slave-out. |
| 11 | PTE6/MOSI1 | bidirectional | Port E bit 6 general-purpose I/O shared with SPI master-out/slave-in. |
| 12 | PTE7/SPSCK1 | bidirectional | Port E bit 7 general-purpose I/O shared with SPI serial clock. |
| 13 | VSS | power_in | Primary ground pin for the MCU, I/O buffers and internal regulator; bypass with 0.1 uF ceramic close to VDD/VSS. |
| 14 | VDD | power_in | Main supply pin for the I/O buffers and internal voltage regulator; use a 0.1 uF ceramic bypass plus bulk capacitor close to the pin. |
| 15 | PTG0/KBIP0 | bidirectional | Port G bit 0 general-purpose I/O shared with keyboard interrupt input 0 (falling edge/low level). |
| 16 | PTG1/KBIP1 | bidirectional | Port G bit 1 general-purpose I/O shared with keyboard interrupt input 1 (falling edge/low level). |
| 17 | PTB0/TPM3CH0/AD1P0 | bidirectional | Port B bit 0 general-purpose I/O shared with TPM3 channel 0 and ADC input AD0; enabling the ADC input disables the digital function. |
| 18 | PTB1/TPM3CH1/AD1P1 | bidirectional | Port B bit 1 general-purpose I/O shared with TPM3 channel 1 and ADC input AD1; enabling the ADC input disables the digital function. |
| 19 | PTB2/AD1P2 | bidirectional | Port B bit 2 general-purpose I/O shared with ADC input AD2. |
| 20 | PTB3/AD1P3 | bidirectional | Port B bit 3 general-purpose I/O shared with ADC input AD3. |
| 21 | VDDAD | power_in | Analog supply for the ADC module, internally connected to VDD in the package; bypass with 0.1 uF ceramic close to the pin. |
| 22 | VSSAD | power_in | Analog ground for the ADC module, internally connected to VSS in the package; bypass with 0.1 uF ceramic close to the pin. |
| 23 | PTD2/AD1P10/KBIP5 | bidirectional | Port D bit 2 general-purpose I/O shared with ADC input AD10 and keyboard interrupt 5 (ADC has higher priority). |
| 24 | PTD3/AD1P11/KBIP6 | bidirectional | Port D bit 3 general-purpose I/O shared with ADC input AD11 and keyboard interrupt 6 (ADC has higher priority). |
| 25 | VREFH | power_in | ADC high reference voltage, internally connected to VDDAD in the package. |
| 26 | VREFL | power_in | ADC low reference voltage, internally connected to VSSAD in the package. |
| 27 | BKGD/MS | bidirectional | Background debug communication pin and mode select at reset; pseudo open-drain with internal pull-up, input hysteresis and no output slew control. |
| 28 | PTG5/XTAL | bidirectional | Port G bit 5 general-purpose I/O shared with oscillator output XTAL. |
| 29 | PTG6/EXTAL | bidirectional | Port G bit 6 general-purpose I/O shared with external clock/oscillator input EXTAL. |
| 30 | VSS | power_in | Secondary VSS pin, connected to system ground or to the primary VSS pin through a low-impedance connection. |
| 31 | PTC0/SCL1 | bidirectional | Port C bit 0 general-purpose I/O shared with IIC serial clock line. |
| 32 | PTC1/SDA1 | bidirectional | Port C bit 1 general-purpose I/O shared with IIC serial data line. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 32 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 5.8 | V | 258 | ||
| Input voltage | Vin | -0.3 | V | maximum printed as VDD + 0.3 | 258 | ||
| Instantaneous maximum current, single pin limit | -25 | 25 | mA | single pin limit, applies to all pins | 258 | ||
| Maximum current at VDD | IDD | 120 | mA | 258 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 258 | ||
| Maximum junction temperature | TJ | 150 | °C | 258 | |||
| Operating temperature range (packaged) | TA | 0 | 70 | °C | TL to TH | 258 | |
| Thermal resistance junction-to-ambient, 32-pin LQFP, 1s board | θJA | 85 | °C/W | 32-pin LQFP, 1s single-layer board | 258 | ||
| Thermal resistance junction-to-ambient, 32-pin LQFP, 2s2p board | θJA | 56 | °C/W | 32-pin LQFP, 2s2p four-layer board | 258 | ||
| External clock high time | tclkh | 1.5 | tcyc | temperature -40 to 125 °C | 274 | ||
| External clock low time | tclkl | 1.5 | tcyc | temperature -40 to 125 °C | 274 | ||
| External clock period | tTPMext | 4 | tcyc | temperature -40 to 125 °C | 274 | ||
| Input capture pulse width | tICPW | 1.5 | tcyc | temperature -40 to 125 °C | 274 | ||
| SPI period, master | tSCK | 2 | 2048 | tcyc | master | 275 | |
| SPI period, slave | tSCK | 4 | tcyc | slave | 275 | ||
| SPI data setup time (input), master | tSI(M) | 30 | ns | master | 275 | ||
| SPI data setup time (input), slave | tSI(S) | 30 | ns | slave | 275 | ||
| SPI data hold time (input), master | tHI(M) | 30 | ns | master | 275 | ||
| SPI data hold time (input), slave | tHI(S) | 30 | ns | slave | 275 | ||
| SPI slave access time | tA | 0 | 40 | ns | slave | 275 | |
| SPI slave disable time | tdis | 40 | ns | slave | 275 | ||
| SPI data setup time (output), master | tSO | 25 | ns | master | 276 | ||
| SPI data setup time (output), slave | tSO | 25 | ns | slave | 276 | ||
| SPI data hold time (output), master | tHO | -10 | ns | master | 276 | ||
| SPI data hold time (output), slave | tHO | -10 | ns | slave | 276 |
CAD (KiCad official)
- Symbol:
MC9S08AC16CFJE - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
mc9s08ac16cfje-etched.step/mc9s08ac16cfje-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc9s08ac16cfje.step/mc9s08ac16cfje.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (296 pp, sha256
a02b13679de67119, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).