component
DS91D176TMAX
Public Made by Adomby adom
Texas Instruments LVDS ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownDS91D176TMAX
Texas Instruments · LVDS ICs · SOIC-8
DS91D176TMAX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | tri_state | Receiver output pin, tri-state LVTTL logic output with VOH = 2.4-2.7V and VOL = 0.28-0.4V at ±8mA, tri-stated when RE is high. |
| 2 | RE | input | Receiver enable pin, active-low control input; receiver enabled at RE ≤ 0.8V and disabled (tri-stated) at RE ≥ 2.0V. |
| 3 | DE | input | Driver enable pin, active-high control input; driver enabled at DE ≥ 2.0V and disabled (high-impedance) at DE ≤ 0.8V. |
| 4 | D | input | Driver input pin accepting LVTTL signals with VIH ≥ 2.0V and VIL ≤ 0.8V. |
| 5 | GND | power_in | Ground reference pin. |
| 6 | A | bidirectional | Non-inverting M-LVDS differential bus pin with driver output differential swing 480-650mV at 50Ω load, receiver input threshold ±50mV (Type 1), and pin voltage range −1.4V to +3.8V. |
| 7 | B | bidirectional | Inverting M-LVDS differential bus pin with driver output differential swing 480-650mV at 50Ω load, receiver input threshold ±50mV (Type 1), and pin voltage range −1.4V to +3.8V. |
| 8 | VCC | power_in | Power supply pin, +3.3V nominal with operating range 3.0V to 3.6V (±0.3V tolerance). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
DS91D176TMAX - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ds91d176tmax-etched.step/ds91d176tmax-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ds91d176tmax.step/ds91d176tmax.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
46defe5ba1a751bb, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).