Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NE5532AP

Texas Instruments · Operational Amplifier · PDIP-8

NE5532AP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier 1; can source/sink up to 38 mA (typical) short-circuit current and drive loads ≥600Ω with output swing to ±10V.
2 1IN- input Inverting input of amplifier 1; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range.
3 1IN+ input Non-inverting input of amplifier 1; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range.
4 VCC- power_in Negative supply pin; recommended operating range -5V to -15V, absolute maximum -18V to 0V.
5 2IN+ input Non-inverting input of amplifier 2; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range.
6 2IN- input Inverting input of amplifier 2; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range.
7 2OUT output Output of amplifier 2; can source/sink up to 38 mA (typical) short-circuit current and drive loads ≥600Ω with output swing to ±10V.
8 VCC+ power_in Positive supply pin; recommended operating range +5V to +15V, absolute maximum 0V to +18V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VIO 0.5 4 mV VCC± = ±15 V; VO = 0; TA = 25°C 4
Input offset voltage VIO 5 mV VCC± = ±15 V; VO = 0; TA = full range (0°C to 70°C) 4
Input offset current IIO 10 150 nA VCC± = ±15 V; VO = 0; TA = 25°C 4
Input offset current IIO 200 nA VCC± = ±15 V; VO = 0; TA = full range (0°C to 70°C) 4
Input bias current IIB 200 800 nA VCC± = ±15 V; VO = 0; TA = 25°C 4
Input bias current IIB 1000 nA VCC± = ±15 V; VO = 0; TA = full range (0°C to 70°C) 4
Common-mode input voltage range VICR -12 13 V VCC± = ±15 V; TA = 25°C 4
Large-signal differential voltage amplification AVD 15 50 V/mV RL ≥ 600 Ω; VO = ±10 V; TA = 25°C 4
Large-signal differential voltage amplification AVD 10 V/mV RL ≥ 600 Ω; VO = ±10 V; TA = full range (0°C to 70°C) 4
Large-signal differential voltage amplification AVD 25 100 V/mV RL ≥ 2 kΩ; VO ±10 V; TA = 25°C 4
Large-signal differential voltage amplification AVD 15 V/mV RL ≥ 2 kΩ; VO ±10 V; TA = full range (0°C to 70°C) 4
Common-mode rejection ratio CMRR 70 100 dB VCC± = ±15 V; VIC = VICR min 4
Supply voltage rejection ratio (ΔVCC±/ΔVIO) kSVR 80 100 dB VCC± = ±9 V to ±15 V; VO = 0 4
Unity-gain bandwidth B1 12 MHz VCC± = ±15 V; TA = 25°C 4
Input resistance ri 30 300 kΩ VCC± = ±15 V; TA = 25°C 4
Output short-circuit current IOS 38 mA VCC± = ±15 V; TA = 25°C 4
Total supply current ICC 6 16 mA VCC± = ±15 V; VO = 0; no load; TA = 25°C 4
Slew rate at unity gain SR 5 V/μs VCC± = ±15 V; TA = 25°C; unity gain (NE5532A column) 4
Equivalent input noise voltage Vn 8 nV/√Hz VCC± = ±15 V; TA = 25°C; f = 30 Hz 4
Equivalent input noise voltage Vn 5 nV/√Hz VCC± = ±15 V; TA = 25°C; f = 1 kHz 4
Equivalent input noise current In 2.7 pA/√Hz VCC± = ±15 V; TA = 25°C; f = 30 Hz 4
Equivalent input noise current In 0.7 pA/√Hz VCC± = ±15 V; TA = 25°C; f = 1 kHz 4
Positive supply voltage VCC+ 5 15 V 3
Negative supply voltage VCC- -5 -15 V 3
Operating free-air temperature (NE5532A) TA 0 70 °C Natural ventilation; NE5532, NE5532A 3
Positive supply voltage VCC+ 0 18 V Referenced to midpoint between VCC+ and VCC- 3
Negative supply voltage VCC- -18 0 V Referenced to midpoint between VCC+ and VCC- 3
Input voltage, either input VI -15 15 V Magnitude must not exceed supply voltage magnitude 3
Input current II -10 10 mA 3
Operating virtual junction temperature TJ 150 °C 3
Storage temperature range Tstg -60 125 °C 3
Junction-to-ambient thermal resistance (P package, PDIP-8) RθJA 85 °C/W P package; per JESD 51-7 3

CAD (KiCad official)

  • Symbol: NE5532AP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: ne5532ap-etched.step / ne5532ap-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ne5532ap.step / ne5532ap.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (23 pp, sha256 9e7aa3da5ba5743b, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF