Generated by kicad-footprint-generator · KiCad file format 20260206
NE5532AP
Texas Instruments · Operational Amplifier · PDIP-8
NE5532AP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of amplifier 1; can source/sink up to 38 mA (typical) short-circuit current and drive loads ≥600Ω with output swing to ±10V. |
| 2 | 1IN- | input | Inverting input of amplifier 1; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range. |
| 3 | 1IN+ | input | Non-inverting input of amplifier 1; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range. |
| 4 | VCC- | power_in | Negative supply pin; recommended operating range -5V to -15V, absolute maximum -18V to 0V. |
| 5 | 2IN+ | input | Non-inverting input of amplifier 2; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range. |
| 6 | 2IN- | input | Inverting input of amplifier 2; input voltage must remain within the ±15V absolute maximum and the ±12V to ±13V (typical) common-mode input range. |
| 7 | 2OUT | output | Output of amplifier 2; can source/sink up to 38 mA (typical) short-circuit current and drive loads ≥600Ω with output swing to ±10V. |
| 8 | VCC+ | power_in | Positive supply pin; recommended operating range +5V to +15V, absolute maximum 0V to +18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 0.5 | 4 | mV | VCC± = ±15 V; VO = 0; TA = 25°C | 4 | |
| Input offset voltage | VIO | 5 | mV | VCC± = ±15 V; VO = 0; TA = full range (0°C to 70°C) | 4 | ||
| Input offset current | IIO | 10 | 150 | nA | VCC± = ±15 V; VO = 0; TA = 25°C | 4 | |
| Input offset current | IIO | 200 | nA | VCC± = ±15 V; VO = 0; TA = full range (0°C to 70°C) | 4 | ||
| Input bias current | IIB | 200 | 800 | nA | VCC± = ±15 V; VO = 0; TA = 25°C | 4 | |
| Input bias current | IIB | 1000 | nA | VCC± = ±15 V; VO = 0; TA = full range (0°C to 70°C) | 4 | ||
| Common-mode input voltage range | VICR | -12 | 13 | V | VCC± = ±15 V; TA = 25°C | 4 | |
| Large-signal differential voltage amplification | AVD | 15 | 50 | V/mV | RL ≥ 600 Ω; VO = ±10 V; TA = 25°C | 4 | |
| Large-signal differential voltage amplification | AVD | 10 | V/mV | RL ≥ 600 Ω; VO = ±10 V; TA = full range (0°C to 70°C) | 4 | ||
| Large-signal differential voltage amplification | AVD | 25 | 100 | V/mV | RL ≥ 2 kΩ; VO ±10 V; TA = 25°C | 4 | |
| Large-signal differential voltage amplification | AVD | 15 | V/mV | RL ≥ 2 kΩ; VO ±10 V; TA = full range (0°C to 70°C) | 4 | ||
| Common-mode rejection ratio | CMRR | 70 | 100 | dB | VCC± = ±15 V; VIC = VICR min | 4 | |
| Supply voltage rejection ratio (ΔVCC±/ΔVIO) | kSVR | 80 | 100 | dB | VCC± = ±9 V to ±15 V; VO = 0 | 4 | |
| Unity-gain bandwidth | B1 | 12 | MHz | VCC± = ±15 V; TA = 25°C | 4 | ||
| Input resistance | ri | 30 | 300 | kΩ | VCC± = ±15 V; TA = 25°C | 4 | |
| Output short-circuit current | IOS | 38 | mA | VCC± = ±15 V; TA = 25°C | 4 | ||
| Total supply current | ICC | 6 | 16 | mA | VCC± = ±15 V; VO = 0; no load; TA = 25°C | 4 | |
| Slew rate at unity gain | SR | 5 | V/μs | VCC± = ±15 V; TA = 25°C; unity gain (NE5532A column) | 4 | ||
| Equivalent input noise voltage | Vn | 8 | nV/√Hz | VCC± = ±15 V; TA = 25°C; f = 30 Hz | 4 | ||
| Equivalent input noise voltage | Vn | 5 | nV/√Hz | VCC± = ±15 V; TA = 25°C; f = 1 kHz | 4 | ||
| Equivalent input noise current | In | 2.7 | pA/√Hz | VCC± = ±15 V; TA = 25°C; f = 30 Hz | 4 | ||
| Equivalent input noise current | In | 0.7 | pA/√Hz | VCC± = ±15 V; TA = 25°C; f = 1 kHz | 4 | ||
| Positive supply voltage | VCC+ | 5 | 15 | V | 3 | ||
| Negative supply voltage | VCC- | -5 | -15 | V | 3 | ||
| Operating free-air temperature (NE5532A) | TA | 0 | 70 | °C | Natural ventilation; NE5532, NE5532A | 3 | |
| Positive supply voltage | VCC+ | 0 | 18 | V | Referenced to midpoint between VCC+ and VCC- | 3 | |
| Negative supply voltage | VCC- | -18 | 0 | V | Referenced to midpoint between VCC+ and VCC- | 3 | |
| Input voltage, either input | VI | -15 | 15 | V | Magnitude must not exceed supply voltage magnitude | 3 | |
| Input current | II | -10 | 10 | mA | 3 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature range | Tstg | -60 | 125 | °C | 3 | ||
| Junction-to-ambient thermal resistance (P package, PDIP-8) | RθJA | 85 | °C/W | P package; per JESD 51-7 | 3 |
CAD (KiCad official)
- Symbol:
NE5532AP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
ne5532ap-etched.step/ne5532ap-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ne5532ap.step/ne5532ap.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
9e7aa3da5ba5743b, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).