component
CDCLVC1104PWR
Public Made by Adomby adom
Texas Instruments Clock Buffers, Drivers, Distributors, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownCDCLVC1104PWR
Texas Instruments · Clock Buffers, Drivers, Distributors · TSSOP-8
CDCLVC1104PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLKIN | input | LVCMOS clock input with threshold at VDD/2, VIL/VIH at VDD/2 ∓ 600 mV for 3.3 V (VDD/2 ∓ 400 mV for 2.5 V), input slew rate 1 to 4 V/ns, and maximum frequency 250 MHz at 3.3 V or 180 MHz at 2.5 V. |
| 2 | 1G | input | Asynchronous output enable control; when 1G is low, the outputs are switched into a low state. |
| 3 | Y0 | output | LVCMOS clock output; unused outputs can be left floating. |
| 4 | GND | power_in | Device ground. |
| 5 | Y2 | output | LVCMOS clock output; unused outputs can be left floating. |
| 6 | VDD | power_in | 2.5-V or 3.3-V device supply; 3.0 V to 3.6 V for 3.3 V operation and 2.3 V to 2.7 V for 2.5 V operation. |
| 7 | Y3 | output | LVCMOS clock output; unused outputs can be left floating. |
| 8 | Y1 | output | LVCMOS clock output; unused outputs can be left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Clock/Timing |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
CDCLVC1104PWR - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
cdclvc1104pwr-etched.step/cdclvc1104pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cdclvc1104pwr.step/cdclvc1104pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
7b5ccb44b8bc0016, retrieved 2026-10-08, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).