component
ADM101EARMZ-REEL
Public Made by Adomby adom
Analog Devices Buffers / Drivers, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADM101EARMZ-REEL
Analog Devices · Buffers / Drivers · MSOP-10
ADM101EARMZ-REEL from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, which must be connected to 0 V. |
| 2 | C1− | passive | Negative terminal of C1 (if C1 is a polarized capacitor). |
| 3 | V− | power_out | Internally generated negative supply voltage; the absolute maximum rating for V− is +0.3 V to −6 V. |
| 4 | TIN | input | Driver input accepting 3 V to 5 V TTL/CMOS logic levels, with an absolute maximum range of −0.3 V to (VCC + 0.3 V). |
| 5 | ROUT | output | Receiver output providing 3 V to 5 V TTL/CMOS logic levels. |
| 6 | RIN | input | Receiver input accepting EIA-232 signal levels, with overvoltage protection rated to ±30 V continuous. |
| 7 | TOUT | output | Driver output at EIA-232 signal levels, typically ±4.2 V swing with a 5 V supply, and continuous short-circuit duration allowed. |
| 8 | SD | input | Shutdown input; logic 1 puts the ADM101E into low power shutdown mode, switching off the dc-dc converter and disabling the transmitter while the receiver stays active. |
| 9 | C1+ | passive | Positive terminal of charge pump capacitor C1 (if C1 is a polarized capacitor). |
| 10 | VCC | power_in | Positive power supply, nominally 5 V (VCC = 5 V ± 10% for the specifications given). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-10 |
| Category | Logic ICs |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Swing (magnitude, VCC = 5 V ±5%) | VOUT | 3.5 | 4.2 | V | VCC = 5 V ± 5%, TOUT loaded with 3 kΩ to GND | 3 | |
| Output Voltage Swing (magnitude, VCC = 5 V ±10%) | VOUT | 3.25 | 4.2 | V | VCC = 5 V ± 10%, TOUT loaded with 3 kΩ to GND | 3 | |
| VCC Power Supply Current (Unloaded) | ICC | 0.5 | 1 | mA | No load, TIN = VCC or GND | 3 | |
| VCC Power Supply Current (Loaded) | ICC | 1.85 | 2.5 | mA | TOUT loaded with 3 kΩ to GND | 3 | |
| VCC Power Supply Current (Shutdown) | ICC | 1 | μA | SD input = VCC | 3 | ||
| Input Logic Threshold Low | VINL | 0.8 | V | 3 | |||
| Input Logic Threshold High | VINH | 2.4 | V | 3 | |||
| Input Leakage Current | -1 | 1 | μA | 3 | |||
| RS-232 Input Voltage Range | -15 | 15 | V | 3 | |||
| RS-232 Input Threshold Low | 0.8 | 2.2 | V | 3 | |||
| RS-232 Input Threshold High | 2.4 | 2.6 | V | 3 | |||
| RS-232 Input Hysteresis | 0.2 | V | 3 | ||||
| RS-232 Input Resistance | 3 | 5 | 7 | kΩ | 3 | ||
| TTL/CMOS Output Voltage Low | VOL | 0.4 | V | IOUT = 1.6 mA | 3 | ||
| TTL/CMOS Output Voltage High | VOH | 3.5 | V | IOUT = −1.0 mA | 3 | ||
| Propagation Delay | 0.25 | μs | RS-232 to TTL | 3 | |||
| Instantaneous Slew Rate | 25 | V/μs | CL = 10 pF, RL = 3 kΩ − 7 kΩ, TA = 25°C | 3 | |||
| Transition Region Slew Rate | 11 | V/μs | RL = 3 kΩ, CL = 1000 pF; measured from +3 V to −3 V or vice versa | 3 | |||
| Baud Rate | 460 | kB | RL = 3 kΩ, CL = 1 nF | 3 | |||
| Output Resistance | 300 | Ω | VCC = 0 V, VOUT = ±2 V | 3 | |||
| RS-232 Output Short Circuit Current (magnitude) | 25 | 60 | mA | 3 | |||
| VCC (positive supply) | VCC | 6 | V | 4 | |||
| V− (internally generated negative supply) | V− | -6 | 0.3 | V | Printed as +0.3 V to −6 V | 4 | |
| Driver Input TIN | TIN | -0.3 | V | Printed upper limit is (VCC + 0.3 V) | 4 | ||
| Receiver Input RIN | RIN | -30 | 30 | V | 4 | ||
| Receiver Output ROUT | ROUT | -0.3 | V | Printed upper limit is (VCC + 0.3 V) | 4 | ||
| Power Dissipation RM-10 | 1488 | mW | RM-10 package; derate 12 mW/°C above 70°C | 4 | |||
| Thermal Impedance | 135 | °C/W | RM-10 package | 4 | |||
| Operating Temperature Range (Industrial, A Version) | TA | -40 | 85 | °C | A version | 4 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| ESD Rating | 2000 | V | Printed as >2000 V | 4 | |||
| ESD Rating (I-O Pins) | 15 | kV | I-O pins | 4 | |||
| Lead Temperature Soldering, Vapor Phase | 215 | °C | Vapor phase, 60 sec | 4 | |||
| Lead Temperature Soldering, Infrared | 220 | °C | Infrared, 15 sec | 4 | |||
| VCC Supply Tolerance | VCC | -10 | 10 | % | VCC = 5 V ± 10% | 3 | |
| VCC Nominal Supply | VCC | 5 | V | Nominally 5 V | 5 |
CAD (KiCad official)
- Symbol:
ADM101EARMZ-REEL - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
adm101earmz-reel-etched.step/adm101earmz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adm101earmz-reel.step/adm101earmz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
3ed9d935b0e7a117, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).