component
VIPER06XS
Public Made by Adomby adom
STMicroelectronics AC-DC Controllers And Regulators, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownVIPER06XS
STMicroelectronics · AC-DC Controllers And Regulators · SOP-10
VIPER06XS from STMicroelectronics, in a SOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Connected to the source of the internal power MOSFET and the controller ground reference. |
| 2 | VDD | power_in | Supply voltage of the control section with an operating range of 11.5 V to 23.5 V, a 23.5 V clamp, and an input current limit of 20 mA; it also receives the charging current for the external VDD capacitor. |
| 3 | LIM | input | Sets the drain current limit: an external resistor to GND reduces the limit (default limit when left open or RLIM > 80 kΩ), and the absolute input voltage range is -0.3 V to 2.8 V. |
| 4 | FB | input | Inverting input of the internal transconductance error amplifier with a reference of 3.2 V to 3.4 V (VREF_FB), and an absolute input voltage range of -0.3 V to 4.8 V. |
| 5 | COMP | passive | Output of the internal transconductance error amplifier used for loop compensation to GND and for direct PWM control by an optocoupler, with a linear range from VCOMPL to VCOMPH and an absolute input voltage range of -0.3 V to 3.5 V. |
| 6 | DRAIN | passive | High-voltage drain of the internal power MOSFET rated 800 V, with a pulse drain current limit of 2.5 A; it also supplies the high-voltage startup bias current and is connected to the metal frame for heat dissipation. |
| 7 | DRAIN | passive | High-voltage drain of the internal power MOSFET rated 800 V, with a pulse drain current limit of 2.5 A; it also supplies the high-voltage startup bias current and is connected to the metal frame for heat dissipation. |
| 8 | DRAIN | passive | High-voltage drain of the internal power MOSFET rated 800 V, with a pulse drain current limit of 2.5 A; it also supplies the high-voltage startup bias current and is connected to the metal frame for heat dissipation. |
| 9 | DRAIN | passive | High-voltage drain of the internal power MOSFET rated 800 V, with a pulse drain current limit of 2.5 A; it also supplies the high-voltage startup bias current and is connected to the metal frame for heat dissipation. |
| 10 | DRAIN | passive | High-voltage drain of the internal power MOSFET rated 800 V, with a pulse drain current limit of 2.5 A; it also supplies the high-voltage startup bias current and is connected to the metal frame for heat dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-10 |
| Category | Power Management (PMIC) |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
VIPER06XS - Footprint:
Package_SO:SOIC-10_3.9x4.9mm_P1mm - 3D model: SOP-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
viper06xs-etched.step/viper06xs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);viper06xs.step/viper06xs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (28 pp, sha256
1f4b7d4d7eefd84f, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).