3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX82C200-T
ZHHXDZ · CAN Controllers · SOP-28
HX82C200-T from ZHHXDZ, in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AD6 | bidirectional | Multiplexed address/data bus bit 6. |
| 2 | AD7 | bidirectional | Multiplexed address/data bus bit 7. |
| 3 | ALE/AS | input | ALE input signal in Intel mode, AS input signal in Motorola mode. |
| 4 | /CS | input | Chip select input, low level enables access to the HX82C200-T. |
| 5 | /RD/E | input | Microcontroller's /RD signal (Intel mode) or E enable signal (Motorola mode). |
| 6 | /WR | input | Microcontroller's /WR signal (Intel mode) or R/W signal (Motorola mode). |
| 7 | CLKOUT | output | Clock output generated for the microcontroller, derived from the internal oscillator, programmable and can be disabled by the Clock Off bit in the Clock Control Register. |
| 8 | VSS1 | power_in | Ground. |
| 9 | XTAL1 | input | Input to the oscillator amplifier and external oscillator signal input; connect to VSS1 through a 15 pF capacitor. |
| 10 | XTAL2 | output | Oscillator amplifier output, left open when using an external oscillator signal; connect to VSS1 through a 15 pF capacitor. |
| 11 | MODE | input | Mode select input: 1 = Intel mode, 0 = Motorola mode. |
| 12 | VDD3 | power_in | 5V supply for the output drivers. |
| 13 | TX0 | output | Output from CAN output driver 0 to the physical line. |
| 14 | TX1 | output | Output from CAN output driver 1 to the physical line. |
| 15 | VSS3 | power_in | Ground for the output drivers. |
| 16 | /INT | output | Active-low open-drain interrupt output to the microcontroller when any internal interrupt register bit is set, wired-OR capable, and a low level can wake the IC from sleep mode. |
| 17 | /RST | input | Active-low reset input for the CAN interface; connect to VSS through a capacitor and to VDD through a resistor for automatic power-on reset (e.g., C=1nF, R=50K). |
| 18 | VDD2 | power_in | 5V supply for the input comparators. |
| 19 | RX0 | input | Input to the CAN input comparator from the physical bus that can wake the device from sleep mode; the only active input when the CBP bit is set (recessive high, dominant low). |
| 20 | RX1 | input | Input to the CAN input comparator from the physical bus that can wake the device from sleep mode; dominant level is read when RX1 is higher than RX0. |
| 21 | VSS2 | power_in | Ground for the input comparators. |
| 22 | VDD1 | power_in | 5V supply for the logic circuits. |
| 23 | AD0 | bidirectional | Multiplexed address/data bus bit 0. |
| 24 | AD1 | bidirectional | Multiplexed address/data bus bit 1. |
| 25 | AD2 | bidirectional | Multiplexed address/data bus bit 2. |
| 26 | AD3 | bidirectional | Multiplexed address/data bus bit 3. |
| 27 | AD4 | bidirectional | Multiplexed address/data bus bit 4. |
| 28 | AD5 | bidirectional | Multiplexed address/data bus bit 5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-28 |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
HX82C200-T - Footprint:
Package_SO:SOP-28_8.4x18.16mm_P1.27mm - 3D model: SOP-28 (KiCad packages3D, STEP)
- 3D model files:
hx82c200-t-etched.step/hx82c200-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx82c200-t.step/hx82c200-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (7 pp, sha256
cdb8820e95af1088, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).