Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX82C200-T

ZHHXDZ · CAN Controllers · SOP-28

HX82C200-T from ZHHXDZ, in a SOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AD6 bidirectional Multiplexed address/data bus bit 6.
2 AD7 bidirectional Multiplexed address/data bus bit 7.
3 ALE/AS input ALE input signal in Intel mode, AS input signal in Motorola mode.
4 /CS input Chip select input, low level enables access to the HX82C200-T.
5 /RD/E input Microcontroller's /RD signal (Intel mode) or E enable signal (Motorola mode).
6 /WR input Microcontroller's /WR signal (Intel mode) or R/W signal (Motorola mode).
7 CLKOUT output Clock output generated for the microcontroller, derived from the internal oscillator, programmable and can be disabled by the Clock Off bit in the Clock Control Register.
8 VSS1 power_in Ground.
9 XTAL1 input Input to the oscillator amplifier and external oscillator signal input; connect to VSS1 through a 15 pF capacitor.
10 XTAL2 output Oscillator amplifier output, left open when using an external oscillator signal; connect to VSS1 through a 15 pF capacitor.
11 MODE input Mode select input: 1 = Intel mode, 0 = Motorola mode.
12 VDD3 power_in 5V supply for the output drivers.
13 TX0 output Output from CAN output driver 0 to the physical line.
14 TX1 output Output from CAN output driver 1 to the physical line.
15 VSS3 power_in Ground for the output drivers.
16 /INT output Active-low open-drain interrupt output to the microcontroller when any internal interrupt register bit is set, wired-OR capable, and a low level can wake the IC from sleep mode.
17 /RST input Active-low reset input for the CAN interface; connect to VSS through a capacitor and to VDD through a resistor for automatic power-on reset (e.g., C=1nF, R=50K).
18 VDD2 power_in 5V supply for the input comparators.
19 RX0 input Input to the CAN input comparator from the physical bus that can wake the device from sleep mode; the only active input when the CBP bit is set (recessive high, dominant low).
20 RX1 input Input to the CAN input comparator from the physical bus that can wake the device from sleep mode; dominant level is read when RX1 is higher than RX0.
21 VSS2 power_in Ground for the input comparators.
22 VDD1 power_in 5V supply for the logic circuits.
23 AD0 bidirectional Multiplexed address/data bus bit 0.
24 AD1 bidirectional Multiplexed address/data bus bit 1.
25 AD2 bidirectional Multiplexed address/data bus bit 2.
26 AD3 bidirectional Multiplexed address/data bus bit 3.
27 AD4 bidirectional Multiplexed address/data bus bit 4.
28 AD5 bidirectional Multiplexed address/data bus bit 5.

Key specifications

Parameter Value
Manufacturer ZHHXDZ
Package SOP-28
Category Interface
Pins 28

CAD (KiCad official)

  • Symbol: HX82C200-T
  • Footprint: Package_SO:SOP-28_8.4x18.16mm_P1.27mm
  • 3D model: SOP-28 (KiCad packages3D, STEP)
  • 3D model files: hx82c200-t-etched.step / hx82c200-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx82c200-t.step / hx82c200-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ZHHXDZ datasheet (7 pp, sha256 cdb8820e95af1088, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF