3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA4181A1QPWRQ1
Texas Instruments · Current Sense Amplifiers · TSSOP-20
INA4181A1QPWRQ1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF1 | input | Channel 1 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing |
| 2 | OUT1 | output | Channel 1 analog output voltage proportional to sensed current magnitude and direction |
| 3 | IN-1 | input | Channel 1 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side) |
| 4 | IN+1 | input | Channel 1 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side) |
| 5 | VS | power_in | Analog power supply pin (range 2.7V to 5.5V) |
| 6 | IN+2 | input | Channel 2 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side) |
| 7 | IN-2 | input | Channel 2 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side) |
| 8 | OUT2 | output | Channel 2 analog output voltage proportional to sensed current magnitude and direction |
| 9 | REF2 | input | Channel 2 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing |
| 10 | NC | unconnected | No internal connection; pin may be left floating or connected to any voltage between VS and ground |
| 11 | NC | unconnected | No internal connection; pin may be left floating or connected to any voltage between VS and ground |
| 12 | REF3 | input | Channel 3 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing |
| 13 | OUT3 | output | Channel 3 analog output voltage proportional to sensed current magnitude and direction |
| 14 | IN-3 | input | Channel 3 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side) |
| 15 | IN+3 | input | Channel 3 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side) |
| 16 | GND | power_in | Analog ground reference pin |
| 17 | IN+4 | input | Channel 4 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side) |
| 18 | IN-4 | input | Channel 4 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side) |
| 19 | OUT4 | output | Channel 4 analog output voltage proportional to sensed current magnitude and direction |
| 20 | REF4 | input | Channel 4 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Amplifiers/Comparators |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode rejection ratio, RTI | CMRR | 84 | 100 | dB | VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C | 8 | |
| Input offset voltage, RTI | VOS | -150 | 25 | 150 | μV | VSENSE = 0mV, VIN+ = 0V | 8 |
| Input offset voltage, RTI (VCM = 12V) | VOS | -500 | 100 | 500 | μV | VSENSE = 0mV | 8 |
| Offset voltage drift, RTI | dVOS/dT | 0.2 | 1 | μV/°C | VSENSE = 0mV, TA = -40°C to +125°C | 8 | |
| Power supply rejection ratio, RTI | PSRR | -40 | 8 | 40 | μV/V | VS = 2.7V to 5.5V, VIN+ = 12V, VSENSE = 0mV | 8 |
| Input offset current | IIO | -0.05 | 0.05 | μA | VSENSE = 0mV | 8 | |
| Gain error | EG | -1 | 0.1 | 1 | % | VOUT = 0.5V to VS - 0.5V, TA = -40°C to +125°C | 8 |
| Gain error vs temperature | 1.5 | 20 | ppm/°C | TA = -40°C to +125°C | 8 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5V to VS - 0.5V | 8 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 8 | |||
| Output swing to VS supply rail (magnitude printed below VS) | VSP | 0.02 | 0.03 | V | RL = 10kΩ to GND, TA = -40°C to +125°C | 8 | |
| Output swing to GND (magnitude printed above GND) | VSN | 0.0005 | 0.005 | V | RL = 10kΩ to GND, TA = -40°C to +125°C | 8 | |
| Quiescent current (INA4181, four channels) | IQ | 690 | 900 | μA | VSENSE = 0mV | 8 | |
| Quiescent current (INA4181, four channels), hot | IQ | 1000 | μA | VSENSE = 0mV, TA = -40°C to +125°C | 8 | ||
| Supply voltage, VS | VS | 6 | V | 7 | |||
| Differential input voltage (VIN+) - (VIN-) | VIN+ - VIN- | -28 | 28 | V | 7 | ||
| Common-mode input voltage (IN+, IN-) | -0.3 | 28 | V | 7 | |||
| Input voltage at REF pin | -0.3 | V | Upper limit printed as VS + 0.3 V | 7 | |||
| Output voltage | -0.3 | V | Upper limit printed as VS + 0.3 V | 7 | |||
| Maximum output current | IOUT | 8 | mA | 7 | |||
| Operating temperature range, natural ventilation | TA | -55 | 150 | °C | Natural ventilation | 7 | |
| Junction temperature | TJ | 150 | °C | 7 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| ESD, human body model (HBM) | V(ESD) | -3000 | 3000 | V | ANSI/ESDA/JEDEC JS-001 | 7 | |
| ESD, charged device model (CDM) | V(ESD) | -1000 | 1000 | V | JEDEC JESD22-C101 | 7 | |
| Common-mode input voltage (IN+ and IN-) | VCM | -0.2 | 12 | 26 | V | 7 | |
| Operating supply voltage | VS | 2.7 | 5 | 5.5 | V | 7 | |
| Operating temperature range, natural ventilation | TA | -40 | 125 | °C | Natural ventilation | 7 | |
| Junction-to-ambient thermal resistance (PW package) | RθJA | 97 | °C/W | PW (TSSOP) package | 7 | ||
| Junction-to-case (top) thermal resistance (PW package) | RθJC(top) | 37.7 | °C/W | PW (TSSOP) package | 7 | ||
| Junction-to-board thermal resistance (PW package) | RθJB | 48.3 | °C/W | PW (TSSOP) package | 7 | ||
| Junction-to-top characterization parameter (PW package) | ψJT | 3.6 | °C/W | PW (TSSOP) package | 7 | ||
| Junction-to-board characterization parameter (PW package) | ψJB | 47.9 | °C/W | PW (TSSOP) package | 7 |
CAD (KiCad official)
- Symbol:
INA4181A1QPWRQ1 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
ina4181a1qpwrq1-etched.step/ina4181a1qpwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina4181a1qpwrq1.step/ina4181a1qpwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (57 pp, sha256
4b84b5214b961c3a, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).