main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina4181a1qpwrq1: viewers · Ray
ina4181a1qpwrq1-etched.fit.json ina4181a1qpwrq1: one-pass backfill (re-etched) · Ray
ina4181a1qpwrq1-etched.glb ina4181a1qpwrq1: one-pass backfill (re-etched) · Ray
ina4181a1qpwrq1-etched.step ina4181a1qpwrq1: one-pass backfill (re-etched) · Ray
ina4181a1qpwrq1-hero.glb ina4181a1qpwrq1: one-pass backfill (re-etched) · Ray
ina4181a1qpwrq1-hero.overlay.json ina4181a1qpwrq1: one-pass backfill (re-etched) · Ray
ina4181a1qpwrq1.glb Publish 0.1.0 · Ray
ina4181a1qpwrq1.kicad_mod Publish 0.1.0 · Ray
ina4181a1qpwrq1.kicad_sym Publish 0.1.0 · Ray
ina4181a1qpwrq1.lbr Publish 0.1.0 · Ray
ina4181a1qpwrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina4181a1qpwrq1: specified limits as data (metadata.characteristics, 33 rows from the datasheet) · Ray

INA4181A1QPWRQ1

Texas Instruments · Current Sense Amplifiers · TSSOP-20

INA4181A1QPWRQ1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF1 input Channel 1 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing
2 OUT1 output Channel 1 analog output voltage proportional to sensed current magnitude and direction
3 IN-1 input Channel 1 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side)
4 IN+1 input Channel 1 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side)
5 VS power_in Analog power supply pin (range 2.7V to 5.5V)
6 IN+2 input Channel 2 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side)
7 IN-2 input Channel 2 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side)
8 OUT2 output Channel 2 analog output voltage proportional to sensed current magnitude and direction
9 REF2 input Channel 2 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing
10 NC unconnected No internal connection; pin may be left floating or connected to any voltage between VS and ground
11 NC unconnected No internal connection; pin may be left floating or connected to any voltage between VS and ground
12 REF3 input Channel 3 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing
13 OUT3 output Channel 3 analog output voltage proportional to sensed current magnitude and direction
14 IN-3 input Channel 3 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side)
15 IN+3 input Channel 3 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side)
16 GND power_in Analog ground reference pin
17 IN+4 input Channel 4 positive current sensing input; connect to bus voltage side of sense resistor (high-side) or load side (low-side)
18 IN-4 input Channel 4 negative current sensing input; connect to load side of sense resistor (high-side) or ground side (low-side)
19 OUT4 output Channel 4 analog output voltage proportional to sensed current magnitude and direction
20 REF4 input Channel 4 reference voltage input (range 0V to VS); sets the zero-current output level for bidirectional current sensing

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Amplifiers/Comparators
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode rejection ratio, RTI CMRR 84 100 dB VIN+ = 0V to 26V, VSENSE = 0mV, TA = -40°C to +125°C 8
Input offset voltage, RTI VOS -150 25 150 μV VSENSE = 0mV, VIN+ = 0V 8
Input offset voltage, RTI (VCM = 12V) VOS -500 100 500 μV VSENSE = 0mV 8
Offset voltage drift, RTI dVOS/dT 0.2 1 μV/°C VSENSE = 0mV, TA = -40°C to +125°C 8
Power supply rejection ratio, RTI PSRR -40 8 40 μV/V VS = 2.7V to 5.5V, VIN+ = 12V, VSENSE = 0mV 8
Input offset current IIO -0.05 0.05 μA VSENSE = 0mV 8
Gain error EG -1 0.1 1 % VOUT = 0.5V to VS - 0.5V, TA = -40°C to +125°C 8
Gain error vs temperature 1.5 20 ppm/°C TA = -40°C to +125°C 8
Nonlinearity error -0.01 0.01 % VOUT = 0.5V to VS - 0.5V 8
Maximum capacitive load 1 nF No sustained oscillation 8
Output swing to VS supply rail (magnitude printed below VS) VSP 0.02 0.03 V RL = 10kΩ to GND, TA = -40°C to +125°C 8
Output swing to GND (magnitude printed above GND) VSN 0.0005 0.005 V RL = 10kΩ to GND, TA = -40°C to +125°C 8
Quiescent current (INA4181, four channels) IQ 690 900 μA VSENSE = 0mV 8
Quiescent current (INA4181, four channels), hot IQ 1000 μA VSENSE = 0mV, TA = -40°C to +125°C 8
Supply voltage, VS VS 6 V 7
Differential input voltage (VIN+) - (VIN-) VIN+ - VIN- -28 28 V 7
Common-mode input voltage (IN+, IN-) -0.3 28 V 7
Input voltage at REF pin -0.3 V Upper limit printed as VS + 0.3 V 7
Output voltage -0.3 V Upper limit printed as VS + 0.3 V 7
Maximum output current IOUT 8 mA 7
Operating temperature range, natural ventilation TA -55 150 °C Natural ventilation 7
Junction temperature TJ 150 °C 7
Storage temperature Tstg -65 150 °C 7
ESD, human body model (HBM) V(ESD) -3000 3000 V ANSI/ESDA/JEDEC JS-001 7
ESD, charged device model (CDM) V(ESD) -1000 1000 V JEDEC JESD22-C101 7
Common-mode input voltage (IN+ and IN-) VCM -0.2 12 26 V 7
Operating supply voltage VS 2.7 5 5.5 V 7
Operating temperature range, natural ventilation TA -40 125 °C Natural ventilation 7
Junction-to-ambient thermal resistance (PW package) RθJA 97 °C/W PW (TSSOP) package 7
Junction-to-case (top) thermal resistance (PW package) RθJC(top) 37.7 °C/W PW (TSSOP) package 7
Junction-to-board thermal resistance (PW package) RθJB 48.3 °C/W PW (TSSOP) package 7
Junction-to-top characterization parameter (PW package) ψJT 3.6 °C/W PW (TSSOP) package 7
Junction-to-board characterization parameter (PW package) ψJB 47.9 °C/W PW (TSSOP) package 7

CAD (KiCad official)

  • Symbol: INA4181A1QPWRQ1
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: ina4181a1qpwrq1-etched.step / ina4181a1qpwrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina4181a1qpwrq1.step / ina4181a1qpwrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (57 pp, sha256 4b84b5214b961c3a, retrieved 2026-10-03, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF