Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

BQ296215DSGR

Texas Instruments · Battery Management · WSON-8-EP(2x2)

BQ296215DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply input for device operation with recommended supply voltage range from 4V to 20V for full functionality.
2 V4 input Analog input for fourth cell voltage detection (V4-V3) with input range 0-5V and low input current less than 100 nanoamperes.
3 V3 input Analog input for third cell voltage detection (V3-V2) with input range 0-5V and low input current less than 100 nanoamperes.
4 V2 input Analog input for second cell voltage detection (V2-V1) with input range 0-5V and low input current less than 100 nanoamperes.
5 V1 input Analog input for first cell voltage detection (V1-VSS) with input range 0-5V and low input current less than 100 nanoamperes.
6 VSS power_in Ground connection to integrated circuit ground and lowest battery cell negative terminal, serving as reference for all comparisons.
7 OUT output Analog output for overvoltage fault detection with high-level active drive of 6-8V at 100 µA load and low open-drain voltage of 250-400 mV at 100 µA sink.
8 REG power_out Regulated 3.0V power supply output with maximum output current of 2 mA, short-circuit current limiting to 4 mA, requiring 0.47 µF external capacitor for stability.
9 PWPD power_in Exposed thermal pad that should be connected to VSS on printed circuit board for optimal thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: BQ296215DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: bq296215dsgr-etched.step / bq296215dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); bq296215dsgr.step / bq296215dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 e6a927461563434f, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF