component
BQ296215DSGR
Public Made by Adomby adom
Texas Instruments Battery Management, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownBQ296215DSGR
Texas Instruments · Battery Management · WSON-8-EP(2x2)
BQ296215DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input for device operation with recommended supply voltage range from 4V to 20V for full functionality. |
| 2 | V4 | input | Analog input for fourth cell voltage detection (V4-V3) with input range 0-5V and low input current less than 100 nanoamperes. |
| 3 | V3 | input | Analog input for third cell voltage detection (V3-V2) with input range 0-5V and low input current less than 100 nanoamperes. |
| 4 | V2 | input | Analog input for second cell voltage detection (V2-V1) with input range 0-5V and low input current less than 100 nanoamperes. |
| 5 | V1 | input | Analog input for first cell voltage detection (V1-VSS) with input range 0-5V and low input current less than 100 nanoamperes. |
| 6 | VSS | power_in | Ground connection to integrated circuit ground and lowest battery cell negative terminal, serving as reference for all comparisons. |
| 7 | OUT | output | Analog output for overvoltage fault detection with high-level active drive of 6-8V at 100 µA load and low open-drain voltage of 250-400 mV at 100 µA sink. |
| 8 | REG | power_out | Regulated 3.0V power supply output with maximum output current of 2 mA, short-circuit current limiting to 4 mA, requiring 0.47 µF external capacitor for stability. |
| 9 | PWPD | power_in | Exposed thermal pad that should be connected to VSS on printed circuit board for optimal thermal and mechanical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
BQ296215DSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
bq296215dsgr-etched.step/bq296215dsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);bq296215dsgr.step/bq296215dsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
e6a927461563434f, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).