component
π142M61
Public Made by Adomby adom
2Pai Semi Digital Isolators, SOP-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownπ142M61
2Pai Semi · Digital Isolators · SOP-16-300mil
π142M61 from 2Pai Semi, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply voltage for isolator side 1, recommended 3 V to 5.5 V, with a low-ESR 0.1 µF to 10 µF bypass capacitor to GND1 placed as close to the device as possible. |
| 2 | GND1 | power_in | Ground 1, the ground reference for isolator side 1. |
| 3 | VIA | input | Logic input A on isolator side 1; the input must be held low when VDD1 is unpowered to avoid powering VDD1 through its ESD protection circuitry. |
| 4 | VIB | input | Logic input B on isolator side 1; the input must be held low when VDD1 is unpowered to avoid powering VDD1 through its ESD protection circuitry. |
| 5 | VOC | output | Logic output C on isolator side 2, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current. |
| 6 | VOD | output | Logic output D on isolator side 2, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current. |
| 7 | NC/EN1 | input | Output enable 1 for the π142M6X variant: side 1 outputs are enabled when EN1 is high or open and are high-impedance when EN1 is low; no connect on the π142M3X variant. |
| 8 | GND1 | power_in | Ground 1, the ground reference for isolator side 1. |
| 9 | GND2 | power_in | Ground 2, the ground reference for isolator side 2. |
| 10 | NC/EN2 | input | Output enable 2 for the π142M6X variant: side 2 outputs are enabled when EN2 is high or open and are high-impedance when EN2 is low; no connect on the π142M3X variant. |
| 11 | VID | input | Logic input D on isolator side 2; the input must be held low when VDD2 is unpowered to avoid powering VDD2 through its ESD protection circuitry. |
| 12 | VIC | input | Logic input C on isolator side 2; the input must be held low when VDD2 is unpowered to avoid powering VDD2 through its ESD protection circuitry. |
| 13 | VOB | output | Logic output B on isolator side 1, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current. |
| 14 | VOA | output | Logic output A on isolator side 1, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current. |
| 15 | GND2 | power_in | Ground 2, the ground reference for isolator side 2. |
| 16 | VDD2 | power_in | Supply voltage for isolator side 2, recommended 3 V to 5.5 V, with a low-ESR 0.1 µF to 10 µF bypass capacitor to GND2 placed as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | 2Pai Semi |
| Package | SOP-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDDx | 3 | 5.5 | V | 3 | ||
| Low Level Input Signal Voltage | VIL | 0 | V | 4 | |||
| High Level Output Current | IOH | -6 | mA | 4 | |||
| Low Level Output Current | IOL | 6 | mA | 4 | |||
| Data Rate | 0 | 10 | Mbps | 4 | |||
| Junction Temperature | TJ | -40 | 150 | °C | 4 | ||
| Ambient Operating Temperature | TA | -40 | 125 | °C | 4 | ||
| Supply Voltages (VDD1-GND1, VDD2-GND2) | VDD1-GND1, VDD2-GND2 | -0.5 | 7 | V | 3 | ||
| Input Voltages | VIA, VIB | -0.5 | V | 3 | |||
| Output Voltages | VOA, VOB | -0.5 | V | 3 | |||
| Average Output Current per Pin, Side 1 | IO1 | -10 | 10 | mA | 3 | ||
| Average Output Current per Pin, Side 2 | IO2 | -10 | 10 | mA | 3 | ||
| Common-Mode Transients Immunity | -200 | 200 | kV/µs | 3 | |||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Ambient Operating Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Minimum Pulse Width | PW | 100 | ns | Within pulse width distortion (PWD) limit | 5 | ||
| Maximum Data Rate | 10 | Mbps | Within PWD limit | 5 | |||
| Propagation Delay Time | tpHL, tpLH | 12 | 16 | ns | 5VDC supply | 5 | |
| Propagation Delay Time | tpHL, tpLH | 14 | 18.5 | ns | 3.3VDC supply | 5 | |
| Pulse Width Distortion | PWD | 0.3 | 3 | ns | Max difference between tpHL and tpLH @ 5VDC supply; value is /tpHL - tpLH/ | 5 | |
| Quiescent Supply Current IDD1 (5VDC, VI=0V for π14xMx0) | IDD1 (Q) | 0.89 | 1.12 | 1.46 | mA | 5VDC; VI=0V for π14xMx0 | 8 |
| Quiescent Supply Current IDD2 (5VDC, VI=5V for π14xMx1) | IDD2 (Q) | 0.89 | 1.12 | 1.46 | mA | 5VDC; VI=5V for π14xMx1 | 8 |
| Quiescent Supply Current IDD1 (5VDC, VI=5V for π14xMx0) | IDD1 (Q) | 1 | 1.25 | 1.63 | mA | 5VDC; VI=5V for π14xMx0 | 8 |
| Quiescent Supply Current IDD2 (5VDC, VI=0V for π14xMx1) | IDD2 (Q) | 1 | 1.25 | 1.63 | mA | 5VDC; VI=0V for π14xMx1 | 8 |
| Quiescent Supply Current IDD1 (3.3VDC, VI=0V for π14xMx0) | IDD1 (Q) | 0.86 | 1.08 | 1.41 | mA | 3.3VDC; VI=0V for π14xMx0 | 8 |
| Quiescent Supply Current IDD2 (3.3VDC, VI=3.3V for π14xMx1) | IDD2 (Q) | 0.86 | 1.08 | 1.41 | mA | 3.3VDC; VI=3.3V for π14xMx1 | 8 |
| Quiescent Supply Current IDD1 (3.3VDC, VI=3.3V for π14xMx0) | IDD1 (Q) | 0.89 | 1.12 | 1.45 | mA | 3.3VDC; VI=3.3V for π14xMx0 | 8 |
| Quiescent Supply Current IDD2 (3.3VDC, VI=0V for π14xMx1) | IDD2 (Q) | 0.89 | 1.12 | 1.45 | mA | 3.3VDC; VI=0V for π14xMx1 | 8 |
| Total Supply Current at 10 Mbps, 5VDC (IDD1) | IDD1 | 2.46 | 3.69 | mA | 10 Mbps, CL = 0 pF, 5VDC | 8 | |
| Total Supply Current at 10 Mbps, 3.3VDC (IDD1) | IDD1 | 1.9 | 2.85 | mA | 10 Mbps, CL = 0 pF, 3.3VDC | 9 | |
| Total Supply Current at 10 Mbps, 3.3VDC (IDD2) | IDD2 | 1.9 | 2.85 | mA | 10 Mbps, CL = 0 pF, 3.3VDC | 9 | |
| Junction to Ambient Thermal Resistance | θJA | 45 | °C/W | Thermocouple located at center of package underside | 9 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | pC | In accordance with DIN V VDE V 0884-11, each π140M3x/π141M3x/π142M3x is proof tested by applying an insulation test voltage ≥ 848 V peak for 1 sec (partial discharge detection limit = 5 pC); each π140 | 10 |
CAD (KiCad official)
- Symbol:
π142M61 - Footprint:
Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm - 3D model: SOP-16-300mil (KiCad packages3D, STEP)
- 3D model files:
142m61-etched.step/142m61-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);142m61.step/142m61.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: 2Pai Semi datasheet (20 pp, sha256
85b22c927af6ccc5, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).