main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers 142m61: viewers · Ray
142m61-etched.glb 142m61: factory component page (tier=lcsc) · Ray
142m61-etched.step 142m61: factory component page (tier=lcsc) · Ray
142m61-hero.glb 142m61: hero GLB from the etched model (keeps the MPN mark) · Ray
142m61-hero.overlay.json 142m61: hero GLB from the etched model (keeps the MPN mark) · Ray
142m61.glb Publish 0.1.0 · Ray
142m61.kicad_mod Publish 0.1.0 · Ray
142m61.kicad_sym Publish 0.1.0 · Ray
142m61.lbr Publish 0.1.0 · Ray
142m61.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

π142M61

2Pai Semi · Digital Isolators · SOP-16-300mil

π142M61 from 2Pai Semi, in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Supply voltage for isolator side 1, recommended 3 V to 5.5 V, with a low-ESR 0.1 µF to 10 µF bypass capacitor to GND1 placed as close to the device as possible.
2 GND1 power_in Ground 1, the ground reference for isolator side 1.
3 VIA input Logic input A on isolator side 1; the input must be held low when VDD1 is unpowered to avoid powering VDD1 through its ESD protection circuitry.
4 VIB input Logic input B on isolator side 1; the input must be held low when VDD1 is unpowered to avoid powering VDD1 through its ESD protection circuitry.
5 VOC output Logic output C on isolator side 2, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current.
6 VOD output Logic output D on isolator side 2, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current.
7 NC/EN1 input Output enable 1 for the π142M6X variant: side 1 outputs are enabled when EN1 is high or open and are high-impedance when EN1 is low; no connect on the π142M3X variant.
8 GND1 power_in Ground 1, the ground reference for isolator side 1.
9 GND2 power_in Ground 2, the ground reference for isolator side 2.
10 NC/EN2 input Output enable 2 for the π142M6X variant: side 2 outputs are enabled when EN2 is high or open and are high-impedance when EN2 is low; no connect on the π142M3X variant.
11 VID input Logic input D on isolator side 2; the input must be held low when VDD2 is unpowered to avoid powering VDD2 through its ESD protection circuitry.
12 VIC input Logic input C on isolator side 2; the input must be held low when VDD2 is unpowered to avoid powering VDD2 through its ESD protection circuitry.
13 VOB output Logic output B on isolator side 1, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current.
14 VOA output Logic output A on isolator side 1, with a 6 mA maximum low-level output current and a -6 mA maximum high-level output current.
15 GND2 power_in Ground 2, the ground reference for isolator side 2.
16 VDD2 power_in Supply voltage for isolator side 2, recommended 3 V to 5.5 V, with a low-ESR 0.1 µF to 10 µF bypass capacitor to GND2 placed as close to the device as possible.

Key specifications

Parameter Value
Manufacturer 2Pai Semi
Package SOP-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDDx 3 5.5 V 3
Low Level Input Signal Voltage VIL 0 V 4
High Level Output Current IOH -6 mA 4
Low Level Output Current IOL 6 mA 4
Data Rate 0 10 Mbps 4
Junction Temperature TJ -40 150 °C 4
Ambient Operating Temperature TA -40 125 °C 4
Supply Voltages (VDD1-GND1, VDD2-GND2) VDD1-GND1, VDD2-GND2 -0.5 7 V 3
Input Voltages VIA, VIB -0.5 V 3
Output Voltages VOA, VOB -0.5 V 3
Average Output Current per Pin, Side 1 IO1 -10 10 mA 3
Average Output Current per Pin, Side 2 IO2 -10 10 mA 3
Common-Mode Transients Immunity -200 200 kV/µs 3
Storage Temperature Range TST -65 150 °C 3
Ambient Operating Temperature Range TA -40 125 °C 3
Minimum Pulse Width PW 100 ns Within pulse width distortion (PWD) limit 5
Maximum Data Rate 10 Mbps Within PWD limit 5
Propagation Delay Time tpHL, tpLH 12 16 ns 5VDC supply 5
Propagation Delay Time tpHL, tpLH 14 18.5 ns 3.3VDC supply 5
Pulse Width Distortion PWD 0.3 3 ns Max difference between tpHL and tpLH @ 5VDC supply; value is /tpHL - tpLH/ 5
Quiescent Supply Current IDD1 (5VDC, VI=0V for π14xMx0) IDD1 (Q) 0.89 1.12 1.46 mA 5VDC; VI=0V for π14xMx0 8
Quiescent Supply Current IDD2 (5VDC, VI=5V for π14xMx1) IDD2 (Q) 0.89 1.12 1.46 mA 5VDC; VI=5V for π14xMx1 8
Quiescent Supply Current IDD1 (5VDC, VI=5V for π14xMx0) IDD1 (Q) 1 1.25 1.63 mA 5VDC; VI=5V for π14xMx0 8
Quiescent Supply Current IDD2 (5VDC, VI=0V for π14xMx1) IDD2 (Q) 1 1.25 1.63 mA 5VDC; VI=0V for π14xMx1 8
Quiescent Supply Current IDD1 (3.3VDC, VI=0V for π14xMx0) IDD1 (Q) 0.86 1.08 1.41 mA 3.3VDC; VI=0V for π14xMx0 8
Quiescent Supply Current IDD2 (3.3VDC, VI=3.3V for π14xMx1) IDD2 (Q) 0.86 1.08 1.41 mA 3.3VDC; VI=3.3V for π14xMx1 8
Quiescent Supply Current IDD1 (3.3VDC, VI=3.3V for π14xMx0) IDD1 (Q) 0.89 1.12 1.45 mA 3.3VDC; VI=3.3V for π14xMx0 8
Quiescent Supply Current IDD2 (3.3VDC, VI=0V for π14xMx1) IDD2 (Q) 0.89 1.12 1.45 mA 3.3VDC; VI=0V for π14xMx1 8
Total Supply Current at 10 Mbps, 5VDC (IDD1) IDD1 2.46 3.69 mA 10 Mbps, CL = 0 pF, 5VDC 8
Total Supply Current at 10 Mbps, 3.3VDC (IDD1) IDD1 1.9 2.85 mA 10 Mbps, CL = 0 pF, 3.3VDC 9
Total Supply Current at 10 Mbps, 3.3VDC (IDD2) IDD2 1.9 2.85 mA 10 Mbps, CL = 0 pF, 3.3VDC 9
Junction to Ambient Thermal Resistance θJA 45 °C/W Thermocouple located at center of package underside 9

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing pC In accordance with DIN V VDE V 0884-11, each π140M3x/π141M3x/π142M3x is proof tested by applying an insulation test voltage ≥ 848 V peak for 1 sec (partial discharge detection limit = 5 pC); each π140 10

CAD (KiCad official)

  • Symbol: π142M61
  • Footprint: Package_SO:SOIC-16W_7.5x12.8mm_P1.27mm
  • 3D model: SOP-16-300mil (KiCad packages3D, STEP)
  • 3D model files: 142m61-etched.step / 142m61-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 142m61.step / 142m61.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: 2Pai Semi datasheet (20 pp, sha256 85b22c927af6ccc5, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF