Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HCPL-061N-000E

Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8

HCPL-061N-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection on the single-channel SO-8 part; the datasheet notes that connecting pins 1 and 4 to input ground can give higher CMR.
2 ANODE passive LED anode; the recommended high-level input forward current is 3.0 to 10 mA, and the input low-level voltage range is -3 to 0.8 V.
3 CATHODE passive LED cathode; the average input current must not exceed 10 mA and the reverse input voltage is limited to 3 V.
4 NC unconnected No internal connection on the single-channel SO-8 part; can be tied to input ground for higher CMR per the datasheet note.
5 GND power_in Ground reference for the detector IC; a 0.1 µF bypass capacitor between pins 5 and 8 is required.
6 VO output Open-collector Schottky-clamped transistor output that sinks up to 50 mA per channel, with an output voltage rating of -0.5 to 7 V and an external pull-up resistor of 330 Ω to 4 kΩ.
7 VE input Enable input that strobes the detector output; the high-level enable voltage is 2.0 V to VCC, the low-level is 0 to 0.8 V, and the absolute maximum is 5.5 V.
8 VCC power_in Supply voltage with a recommended range of 4.5 to 5.5 V and an absolute maximum of 7 V; a 0.1 µF bypass capacitor to pin 5 is required.

Key specifications

Parameter Value
Manufacturer Broadcom/AVAGO
Package SOIC-8
Category Optoisolators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (recommended) VCC 4.5 5.5 Volts 7
Operating Temperature (recommended) TA -40 85 °C 7
Input Current, High Level (recommended) IFH 3 10 mA 7
Input Voltage, Low Level (recommended) VFL -3 0.8 V 7
High Level Enable Voltage (recommended) VEH 2 V 7
Low Level Enable Voltage (recommended) VEL 0 0.8 V 7
Output Pull-up Resistor RL (range 330 Ω to 4k Ω) RL 330 Ω 7
Fan Out (at RL = 1 kΩ) N 5 TTL Loads RL = 1 kΩ 7
Storage Temperature TS -55 125 °C 7
Operating Temperature TA -40 85 °C 7
Average Input Current IF(AVG) 10 mA 7
Reverse Input Voltage VR 3 V 7
Supply Voltage VCC -0.5 7 V 7
Enable Input Voltage VE -0.5 5.5 V 7
Output Collector Current (Each Channel) IO 50 mA 7
Output Power Dissipation (Each Channel) PO 60 mW 7
Output Voltage (Each Channel) VO -0.5 7 V 7
High Level Output Current IOH 3.1 100 µA VCC = 5.5 V, VO = 5.5 V, VF = 0.8 V, VE = 2.0 V 8
Low Level Output Voltage (sinking) VOL 0.4 0.6 V VCC = 5.5 V, IOL = 13 mA, IF = 3.0 mA, VE = 2.0 V 8
High Level Supply Current ICCH 7 10 mA VE = 0.5 V, VCC = 5.5 V 8
Low Level Supply Current ICCL 8 13 mA VE = 0.5 V, VCC = 5.5 V 8
High Level Enable Current IEH -0.6 -1.6 mA VCC = 5.5 V, VE = 2.0 V 8
Low Level Enable Current IEL -0.9 -1.6 mA VCC = 5.5 V, VE = 0.5 V 8
Input Forward Voltage VF 1 1.3 1.6 V IF = 4 mA 8
Input Reverse Breakdown Voltage BVR 3 5 V IR = 100 µA 8
Temperature Coefficient of Forward Voltage ∆VF/∆TA -1.25 mV/°C IF = 4 mA 8
Input Capacitance CIN 60 pF f = 1 MHz, VF = 0 V 8
Input Current Threshold, High to Low ITHL 1.5 3 mA VCC = 5.5 V, VO = 0.6 V, IO > 13 mA (Sinking) 9
Propagation Delay Time to High Output Level tPLH 52 100 ns IF = 3.5 mA, VCC = 5.0 V, VE = Open 9
Propagation Delay Time to Low Output Level tPHL 53 100 ns 9
Pulse Width Distortion PWD 11 45 ns 9
Propagation Delay Skew tPSK 60 ns 9
Output Rise Time tR 42 ns 9
Output Fall Time tF 12 ns 9
Propagation Delay Time of Enable from VEH to VEL tEHL 19 ns IF = 3.5 mA, VCC = 5.0 V, VEL = 0 V, VEH = 3 V 9
Propagation Delay Time of Enable from VEL to VEH tELH 30 ns IF = 3.5 mA, VCC = 5.0 V, VEL = 0 V, VEH = 3 V 9
Output High Level Common Mode Transient Immunity /CMH/ 1 5 kV/µs VCM = 1000 V, VCC = 5.0 V, RL = 350 Ω, IF = 0 mA, TA = 25°C 9
Output Low Level Common Mode Transient Immunity /CML/ 1 5 kV/µs VCM = 1000 V, VCC = 5.0 V, RL = 350 Ω, IF = 3.5 mA, VO(MAX) = 0.8 V, TA = 25°C 9
Input-Output Momentary Withstand Voltage VISO 3750 V rms RH ≤ 50%, t = 1 min, TA = 25°C 10
Input-Output Resistance RI-O 1012 Ω VI-O = 500 Vdc 10
Input-Output Capacitance CI-O 0.6 pF f = 1 MHz, TA = 25°C 10
Power Derating above 80 °C free-air (SOIC-8) 2.7 mW/°C Derate linearly above 80 °C free-air temperature 10

CAD (KiCad official)

  • Symbol: HCPL-061N-000E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: hcpl-061n-000e-etched.step / hcpl-061n-000e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hcpl-061n-000e.step / hcpl-061n-000e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Broadcom/AVAGO datasheet (17 pp, sha256 460225edc3ae93bc, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF