3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHCPL-061N-000E
Broadcom/AVAGO · Logic Output Optoisolators · SOIC-8
HCPL-061N-000E from Broadcom/AVAGO, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection on the single-channel SO-8 part; the datasheet notes that connecting pins 1 and 4 to input ground can give higher CMR. |
| 2 | ANODE | passive | LED anode; the recommended high-level input forward current is 3.0 to 10 mA, and the input low-level voltage range is -3 to 0.8 V. |
| 3 | CATHODE | passive | LED cathode; the average input current must not exceed 10 mA and the reverse input voltage is limited to 3 V. |
| 4 | NC | unconnected | No internal connection on the single-channel SO-8 part; can be tied to input ground for higher CMR per the datasheet note. |
| 5 | GND | power_in | Ground reference for the detector IC; a 0.1 µF bypass capacitor between pins 5 and 8 is required. |
| 6 | VO | output | Open-collector Schottky-clamped transistor output that sinks up to 50 mA per channel, with an output voltage rating of -0.5 to 7 V and an external pull-up resistor of 330 Ω to 4 kΩ. |
| 7 | VE | input | Enable input that strobes the detector output; the high-level enable voltage is 2.0 V to VCC, the low-level is 0 to 0.8 V, and the absolute maximum is 5.5 V. |
| 8 | VCC | power_in | Supply voltage with a recommended range of 4.5 to 5.5 V and an absolute maximum of 7 V; a 0.1 µF bypass capacitor to pin 5 is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Broadcom/AVAGO |
| Package | SOIC-8 |
| Category | Optoisolators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (recommended) | VCC | 4.5 | 5.5 | Volts | 7 | ||
| Operating Temperature (recommended) | TA | -40 | 85 | °C | 7 | ||
| Input Current, High Level (recommended) | IFH | 3 | 10 | mA | 7 | ||
| Input Voltage, Low Level (recommended) | VFL | -3 | 0.8 | V | 7 | ||
| High Level Enable Voltage (recommended) | VEH | 2 | V | 7 | |||
| Low Level Enable Voltage (recommended) | VEL | 0 | 0.8 | V | 7 | ||
| Output Pull-up Resistor RL (range 330 Ω to 4k Ω) | RL | 330 | Ω | 7 | |||
| Fan Out (at RL = 1 kΩ) | N | 5 | TTL Loads | RL = 1 kΩ | 7 | ||
| Storage Temperature | TS | -55 | 125 | °C | 7 | ||
| Operating Temperature | TA | -40 | 85 | °C | 7 | ||
| Average Input Current | IF(AVG) | 10 | mA | 7 | |||
| Reverse Input Voltage | VR | 3 | V | 7 | |||
| Supply Voltage | VCC | -0.5 | 7 | V | 7 | ||
| Enable Input Voltage | VE | -0.5 | 5.5 | V | 7 | ||
| Output Collector Current (Each Channel) | IO | 50 | mA | 7 | |||
| Output Power Dissipation (Each Channel) | PO | 60 | mW | 7 | |||
| Output Voltage (Each Channel) | VO | -0.5 | 7 | V | 7 | ||
| High Level Output Current | IOH | 3.1 | 100 | µA | VCC = 5.5 V, VO = 5.5 V, VF = 0.8 V, VE = 2.0 V | 8 | |
| Low Level Output Voltage (sinking) | VOL | 0.4 | 0.6 | V | VCC = 5.5 V, IOL = 13 mA, IF = 3.0 mA, VE = 2.0 V | 8 | |
| High Level Supply Current | ICCH | 7 | 10 | mA | VE = 0.5 V, VCC = 5.5 V | 8 | |
| Low Level Supply Current | ICCL | 8 | 13 | mA | VE = 0.5 V, VCC = 5.5 V | 8 | |
| High Level Enable Current | IEH | -0.6 | -1.6 | mA | VCC = 5.5 V, VE = 2.0 V | 8 | |
| Low Level Enable Current | IEL | -0.9 | -1.6 | mA | VCC = 5.5 V, VE = 0.5 V | 8 | |
| Input Forward Voltage | VF | 1 | 1.3 | 1.6 | V | IF = 4 mA | 8 |
| Input Reverse Breakdown Voltage | BVR | 3 | 5 | V | IR = 100 µA | 8 | |
| Temperature Coefficient of Forward Voltage | ∆VF/∆TA | -1.25 | mV/°C | IF = 4 mA | 8 | ||
| Input Capacitance | CIN | 60 | pF | f = 1 MHz, VF = 0 V | 8 | ||
| Input Current Threshold, High to Low | ITHL | 1.5 | 3 | mA | VCC = 5.5 V, VO = 0.6 V, IO > 13 mA (Sinking) | 9 | |
| Propagation Delay Time to High Output Level | tPLH | 52 | 100 | ns | IF = 3.5 mA, VCC = 5.0 V, VE = Open | 9 | |
| Propagation Delay Time to Low Output Level | tPHL | 53 | 100 | ns | 9 | ||
| Pulse Width Distortion | PWD | 11 | 45 | ns | 9 | ||
| Propagation Delay Skew | tPSK | 60 | ns | 9 | |||
| Output Rise Time | tR | 42 | ns | 9 | |||
| Output Fall Time | tF | 12 | ns | 9 | |||
| Propagation Delay Time of Enable from VEH to VEL | tEHL | 19 | ns | IF = 3.5 mA, VCC = 5.0 V, VEL = 0 V, VEH = 3 V | 9 | ||
| Propagation Delay Time of Enable from VEL to VEH | tELH | 30 | ns | IF = 3.5 mA, VCC = 5.0 V, VEL = 0 V, VEH = 3 V | 9 | ||
| Output High Level Common Mode Transient Immunity | /CMH/ | 1 | 5 | kV/µs | VCM = 1000 V, VCC = 5.0 V, RL = 350 Ω, IF = 0 mA, TA = 25°C | 9 | |
| Output Low Level Common Mode Transient Immunity | /CML/ | 1 | 5 | kV/µs | VCM = 1000 V, VCC = 5.0 V, RL = 350 Ω, IF = 3.5 mA, VO(MAX) = 0.8 V, TA = 25°C | 9 | |
| Input-Output Momentary Withstand Voltage | VISO | 3750 | V rms | RH ≤ 50%, t = 1 min, TA = 25°C | 10 | ||
| Input-Output Resistance | RI-O | 1012 | Ω | VI-O = 500 Vdc | 10 | ||
| Input-Output Capacitance | CI-O | 0.6 | pF | f = 1 MHz, TA = 25°C | 10 | ||
| Power Derating above 80 °C free-air (SOIC-8) | 2.7 | mW/°C | Derate linearly above 80 °C free-air temperature | 10 |
CAD (KiCad official)
- Symbol:
HCPL-061N-000E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
hcpl-061n-000e-etched.step/hcpl-061n-000e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hcpl-061n-000e.step/hcpl-061n-000e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Broadcom/AVAGO datasheet (17 pp, sha256
460225edc3ae93bc, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).