Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430G2402IPW20R

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · TSSOP-20

MSP430G2402IPW20R from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Positive digital supply voltage, rated 1.8 V to 3.6 V for normal operation
2 P1.0/TA0CLK/ACLK/A0 bidirectional Port 1 I/O bit 0; selectable as Timer0_A clock input (TA0CLK), ACLK signal output, or ADC10 analog input A0 (MSP430G2x32 only)
3 P1.1/TA0.0/A1 bidirectional Port 1 I/O bit 1; selectable as Timer0_A capture/compare output (TA0.0) or ADC10 analog input A1 (MSP430G2x32 only)
4 P1.2/TA0.1/A2 bidirectional Port 1 I/O bit 2; selectable as Timer0_A capture/compare output (TA0.1) or ADC10 analog input A2 (MSP430G2x32 only)
5 P1.3/ADC10CLK/A3/VREF-/VEREF- bidirectional Port 1 I/O bit 3; selectable as ADC10 conversion clock output, ADC10 analog input A3, or negative reference voltage (MSP430G2x32 only)
6 P1.4/TA0.2/SMCLK/A4/VREF+/VEREF+/TCK bidirectional Port 1 I/O bit 4; selectable as Timer0_A capture/compare output (TA0.2), SMCLK signal output, ADC10 analog input A4 (MSP430G2x32 only), positive reference voltage (MSP430G2x32 only), or JTAG test clock input
7 P1.5/TA0.0/A5/SCLK/TMS bidirectional Port 1 I/O bit 5; selectable as Timer0_A output (TA0.0), ADC10 analog input A5 (MSP430G2x32 only), USI serial clock, or JTAG test mode select
8 P2.0 bidirectional Port 2 I/O bit 0 with edge-selectable interrupt capability and programmable pull-down resistor
9 P2.1 bidirectional Port 2 I/O bit 1 with edge-selectable interrupt capability and programmable pull-down resistor
10 P2.2 bidirectional Port 2 I/O bit 2 with edge-selectable interrupt capability and programmable pull-down resistor
11 P2.3 bidirectional Port 2 I/O bit 3 with edge-selectable interrupt capability and programmable pull-down resistor
12 P2.4 bidirectional Port 2 I/O bit 4 with edge-selectable interrupt capability and programmable pull-down resistor
13 P2.5 bidirectional Port 2 I/O bit 5 with edge-selectable interrupt capability and programmable pull-down resistor
14 P1.6/TA0.1/A6/SDO/SCL/TDI/TCLK bidirectional Port 1 I/O bit 6; selectable as Timer0_A compare output (TA0.1), ADC10 analog input A6 (MSP430G2x32 only), USI serial data output (SDO), USI I2C clock (SCL), or JTAG test data input (TDI)
15 P1.7/SDI/SDA/A7/TDO/TDI bidirectional Port 1 I/O bit 7; selectable as USI serial data input (SDI), USI I2C data line (SDA), ADC10 analog input A7 (MSP430G2x32 only), or JTAG test data output/input (TDO/TDI)
16 RST/NMI/SBWTDIO input External reset input or nonmaskable interrupt input; also serves as Spy-Bi-Wire test data I/O during device programming; pulse width t(reset) must be ≥2 µs
17 TEST/SBWTCK input Test mode selection input for JTAG interface pins on Port 1; also serves as Spy-Bi-Wire test clock input; device protection fuse is connected to this pin
18 XOUT/P2.7 bidirectional Crystal oscillator output terminal or Port 2 I/O bit 7; oscillator driver remains connected until P2SEL.7 is cleared; excess current flows if used as input
19 XIN/P2.6/TA0.1 bidirectional Crystal oscillator input terminal or Port 2 I/O bit 6; selectable as Timer0_A compare output (TA0.1) when configured as P2.6
20 DVSS power_in Digital ground reference

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

CAD (KiCad official)

  • Symbol: MSP430G2402IPW20R
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: msp430g2402ipw20r-etched.step / msp430g2402ipw20r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430g2402ipw20r.step / msp430g2402ipw20r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (77 pp, sha256 6df2cd5fcd8d8260, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF