3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8008BI-22-18E-12.288000
SiTime · Programmable Oscillators · SMD3225-4P
SIT8008BI-22-18E-12.288000 from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed as OE, ST or NC: in OE mode a low level puts the output in high-Z, in ST mode a low level enters standby with the output weakly pulled low, and in NC mode the pin has no function; VIH is 70% Vdd minimum, VIL is 30% Vdd maximum, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven. |
| 2 | GND | power_in | Electrical ground; a capacitor of 0.1 µF or higher is required between Vdd and GND. |
| 3 | OUT | output | Oscillator clock output, LVCMOS/HCMOS compatible, with 45% to 55% duty cycle across all Vdd options. |
| 4 | VDD | power_in | Power supply voltage; the absolute maximum Vdd is 4 V and the supply options run from 1.62 V to 3.63 V depending on the ordered option. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD3225-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Frequency Range | f | 1 | 110 | MHz | 1 | ||
| Operating Temperature Range (Industrial, from MPN suffix I) | T_use | -40 | 85 | °C | Industrial | 1 | |
| Supply Voltage Option Vdd_1.8 (MPN code 18) | Vdd_1.8 | 1.62 | 1.8 | 1.98 | V | Contact SiTime for 1.5 V support | 1 |
| Current Consumption | Idd | 3.5 | 4.1 | mA | No load condition, f = 20 MHz, Vdd_1.8 | 1 | |
| OE Disable Current | I_OD | 4 | mA | Vdd_1.8. OE = GND, Output in high-Z state | 1 | ||
| Standby Current | I_std | 0.2 | 1.3 | A | ST = GND, Vdd_1.8, Output is weakly pulled down | 1 | |
| Duty Cycle | DC | 45 | 55 | % | All Vdds | 2 | |
| Rise/Fall Time | Tr, Tf | 1.3 | 2.5 | ns | 20% - 80% Vdd_1.8 | 2 | |
| Output High Voltage | VOH | 90 | %Vdd | IOH = -2 mA (Vdd_1.8) | 2 | ||
| Output Low Voltage | VOL | 10 | %Vdd | IOL = 2 mA (Vdd_1.8) | 2 | ||
| Input High Voltage | VIH | 70 | %Vdd | Pin 1, OE or ST | 2 | ||
| Input Low Voltage | VIL | 30 | %Vdd | Pin 1, OE or ST | 2 | ||
| Input Pull-up Impedance | Z_in | 50 | 87 | 150 | k | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input Pull-up Impedance (ST logic low) | Z_in | 2 | M | Pin 1, ST logic low | 2 | ||
| Startup Time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/Disable Time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume Time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS Period Jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_1.8 | 2 | |
| Peak-to-peak Period Jitter | T_pk | 14 | 30 | ps | f = 75 MHz, Vdd_1.8 | 2 | |
| RMS Phase Jitter (random) | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8 | 2 | |
| RMS Phase Jitter (random) | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8 | 2 | |
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Supply Voltage (Vdd) | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic Discharge | 2000 | V | 3 | ||||
| Soldering Temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction Temperature | 150 | °C | Exceeding this temperature for extended period may damage the device (note 3) | 3 | |||
| Maximum Operating Junction Temperature | 95 | °C | Max operating ambient temperature 85°C | 3 | |||
| Pin 1 pull-up resistor (if pin 1 not externally driven) | 10 | kΩ | OE or ST mode, 10 kΩ or less recommended | 2 | |||
| Vdd to GND decoupling capacitor | 0.1 | µF | Between Vdd and GND, 0.1 µF or higher required | 2 | |||
| Thermal Resistance Junction-to-Ambient, 4 Layer Board (package 3225) | θJA | 109 | °C/W | JA, 4 Layer Board, 3225 package | 3 | ||
| Thermal Resistance Junction-to-Ambient, 2 Layer Board (package 3225) | θJA | 212 | °C/W | JA, 2 Layer Board, 3225 package | 3 | ||
| Thermal Resistance Junction-to-Case, Bottom (package 3225) | θJC | 27 | °C/W | JC, Bottom, 3225 package | 3 |
CAD (KiCad official)
- Symbol:
SIT8008BI-22-18E-12.288000 - Footprint:
Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm - 3D model: SMD3225-4P (KiCad packages3D, STEP)
- 3D model files:
sit8008bi-22-18e-12-288000-etched.step/sit8008bi-22-18e-12-288000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8008bi-22-18e-12-288000.step/sit8008bi-22-18e-12-288000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
fcdbddbb6ff5c9c4, retrieved 2026-10-14, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).