main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sit8008bi-22-18e-12-288000: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000-etched.glb Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000-etched.step sit8008bi-22-18e-12-288000: factory component page (tier=lcsc) · Ray
sit8008bi-22-18e-12-288000-hero.glb sit8008bi-22-18e-12-288000: hero GLB from the etched model (keeps the MPN mark) · Ray
sit8008bi-22-18e-12-288000-hero.overlay.json Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000.glb Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000.kicad_mod Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000.kicad_sym Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000.lbr Publish 0.1.0 · Ray
sit8008bi-22-18e-12-288000.step Publish 0.1.0 · Ray

SIT8008BI-22-18E-12.288000

SiTime · Programmable Oscillators · SMD3225-4P

SIT8008BI-22-18E-12.288000 from SiTime, in a SMD3225-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Factory-programmed as OE, ST or NC: in OE mode a low level puts the output in high-Z, in ST mode a low level enters standby with the output weakly pulled low, and in NC mode the pin has no function; VIH is 70% Vdd minimum, VIL is 30% Vdd maximum, and a pull-up of 10 kΩ or less is recommended if the pin is not externally driven.
2 GND power_in Electrical ground; a capacitor of 0.1 µF or higher is required between Vdd and GND.
3 OUT output Oscillator clock output, LVCMOS/HCMOS compatible, with 45% to 55% duty cycle across all Vdd options.
4 VDD power_in Power supply voltage; the absolute maximum Vdd is 4 V and the supply options run from 1.62 V to 3.63 V depending on the ordered option.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD3225-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Frequency Range f 1 110 MHz 1
Operating Temperature Range (Industrial, from MPN suffix I) T_use -40 85 °C Industrial 1
Supply Voltage Option Vdd_1.8 (MPN code 18) Vdd_1.8 1.62 1.8 1.98 V Contact SiTime for 1.5 V support 1
Current Consumption Idd 3.5 4.1 mA No load condition, f = 20 MHz, Vdd_1.8 1
OE Disable Current I_OD 4 mA Vdd_1.8. OE = GND, Output in high-Z state 1
Standby Current I_std 0.2 1.3 A ST = GND, Vdd_1.8, Output is weakly pulled down 1
Duty Cycle DC 45 55 % All Vdds 2
Rise/Fall Time Tr, Tf 1.3 2.5 ns 20% - 80% Vdd_1.8 2
Output High Voltage VOH 90 %Vdd IOH = -2 mA (Vdd_1.8) 2
Output Low Voltage VOL 10 %Vdd IOL = 2 mA (Vdd_1.8) 2
Input High Voltage VIH 70 %Vdd Pin 1, OE or ST 2
Input Low Voltage VIL 30 %Vdd Pin 1, OE or ST 2
Input Pull-up Impedance Z_in 50 87 150 k Pin 1, OE logic high or logic low, or ST logic high 2
Input Pull-up Impedance (ST logic low) Z_in 2 M Pin 1, ST logic low 2
Startup Time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/Disable Time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume Time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS Period Jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_1.8 2
Peak-to-peak Period Jitter T_pk 14 30 ps f = 75 MHz, Vdd_1.8 2
RMS Phase Jitter (random) T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8 2
RMS Phase Jitter (random) T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8 2
Storage Temperature -65 150 °C 3
Supply Voltage (Vdd) Vdd -0.5 4 V 3
Electrostatic Discharge 2000 V 3
Soldering Temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction Temperature 150 °C Exceeding this temperature for extended period may damage the device (note 3) 3
Maximum Operating Junction Temperature 95 °C Max operating ambient temperature 85°C 3
Pin 1 pull-up resistor (if pin 1 not externally driven) 10 kΩ OE or ST mode, 10 kΩ or less recommended 2
Vdd to GND decoupling capacitor 0.1 µF Between Vdd and GND, 0.1 µF or higher required 2
Thermal Resistance Junction-to-Ambient, 4 Layer Board (package 3225) θJA 109 °C/W JA, 4 Layer Board, 3225 package 3
Thermal Resistance Junction-to-Ambient, 2 Layer Board (package 3225) θJA 212 °C/W JA, 2 Layer Board, 3225 package 3
Thermal Resistance Junction-to-Case, Bottom (package 3225) θJC 27 °C/W JC, Bottom, 3225 package 3

CAD (KiCad official)

  • Symbol: SIT8008BI-22-18E-12.288000
  • Footprint: Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm
  • 3D model: SMD3225-4P (KiCad packages3D, STEP)
  • 3D model files: sit8008bi-22-18e-12-288000-etched.step / sit8008bi-22-18e-12-288000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8008bi-22-18e-12-288000.step / sit8008bi-22-18e-12-288000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 fcdbddbb6ff5c9c4, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF