Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LQP03TG2N4B02D

Murata Electronics · Inductors (SMD) · 0201

LQP03TG2N4B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive First terminal of the 2.4 nH chip coil (±0.1 nH B tolerance), rated current 450 mA, DC resistance 0.25 ohm max; the datasheet marks polarity with a white dot on the coloring side but does not assign terminal numbers.
2 2 passive Second terminal of the 2.4 nH chip coil (±0.1 nH B tolerance), rated current 450 mA, DC resistance 0.25 ohm max; the datasheet marks polarity with a white dot on the coloring side but does not assign terminal numbers.

Key specifications

Parameter Value
Manufacturer Murata Electronics
Package 0201
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance (code B) -0.1 0.1 nH Tolerance code B: ±0.1 nH, for nominal 2.4 nH 2
Inductance (nominal) L 2.4 nH Nominal value for LQP03TG2N4B02D; measured at 500 MHz per section 7.1 2
Q (min) Q 13 Minimum Q for the 2.0 to 2.9 nH group as printed; measuring frequency not stated for Q 2
DC resistance DCR 0.25 Ω Ω max, as printed in the group spanning 2.0 to 2.9 nH 2
Self resonant frequency (min) SRF 11000 MHz Minimum SRF 2
Self resonant frequency (typ) SRF 13700 MHz Typical value is actual performance 2
Rated current IR 450 mA Rated current for the 2.0 to 2.9 nH group; self temperature rise limited to 25°C max 2
Inductance change after vibration ΔL -10 10 % Vibration test 10 Hz to 2000 Hz, 2 h in each of 3 directions; within ±10% 6
Inductance change after resistance to soldering heat ΔL -10 10 % Solder temperature 260°C±5°C, immersion 5 s±1 s; within ±10% 6
Inductance change after heat resistance ΔL -10 10 % Temperature 125°C, 1000 h (+48 h, -0 h); within ±10% 7
Operating temperature range Top -55 125 °C Ambient temperature; rated current can be handled in this range 1
Storage temperature range Tstg -55 125 °C Storage temperature range as printed in Rating section 1
Reflow peak temperature (limit profile) 260 °C Limit profile, 10 s, 2 reflow cycles max 9
Soldering iron tip temperature 350 °C Rework with soldering iron; tip temperature 350°C max, output 80 W max, soldering time 3 s (+1, -0), 2 times 10

CAD (KiCad official)

  • Symbol: LQP03TG2N4B02D
  • Footprint: Inductor_SMD:L_0201_0603Metric
  • 3D model: 0201 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Murata Electronics datasheet (12 pp, sha256 a44c6cc1c5c095a7, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF