Generated by kicad-footprint-generator · KiCad file format 20260206
LQP03TG2N4B02D
Murata Electronics · Inductors (SMD) · 0201
LQP03TG2N4B02D from Murata Electronics, in a 0201. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | First terminal of the 2.4 nH chip coil (±0.1 nH B tolerance), rated current 450 mA, DC resistance 0.25 ohm max; the datasheet marks polarity with a white dot on the coloring side but does not assign terminal numbers. |
| 2 | 2 | passive | Second terminal of the 2.4 nH chip coil (±0.1 nH B tolerance), rated current 450 mA, DC resistance 0.25 ohm max; the datasheet marks polarity with a white dot on the coloring side but does not assign terminal numbers. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0201 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code B) | -0.1 | 0.1 | nH | Tolerance code B: ±0.1 nH, for nominal 2.4 nH | 2 | ||
| Inductance (nominal) | L | 2.4 | nH | Nominal value for LQP03TG2N4B02D; measured at 500 MHz per section 7.1 | 2 | ||
| Q (min) | Q | 13 | Minimum Q for the 2.0 to 2.9 nH group as printed; measuring frequency not stated for Q | 2 | |||
| DC resistance | DCR | 0.25 | Ω | Ω max, as printed in the group spanning 2.0 to 2.9 nH | 2 | ||
| Self resonant frequency (min) | SRF | 11000 | MHz | Minimum SRF | 2 | ||
| Self resonant frequency (typ) | SRF | 13700 | MHz | Typical value is actual performance | 2 | ||
| Rated current | IR | 450 | mA | Rated current for the 2.0 to 2.9 nH group; self temperature rise limited to 25°C max | 2 | ||
| Inductance change after vibration | ΔL | -10 | 10 | % | Vibration test 10 Hz to 2000 Hz, 2 h in each of 3 directions; within ±10% | 6 | |
| Inductance change after resistance to soldering heat | ΔL | -10 | 10 | % | Solder temperature 260°C±5°C, immersion 5 s±1 s; within ±10% | 6 | |
| Inductance change after heat resistance | ΔL | -10 | 10 | % | Temperature 125°C, 1000 h (+48 h, -0 h); within ±10% | 7 | |
| Operating temperature range | Top | -55 | 125 | °C | Ambient temperature; rated current can be handled in this range | 1 | |
| Storage temperature range | Tstg | -55 | 125 | °C | Storage temperature range as printed in Rating section | 1 | |
| Reflow peak temperature (limit profile) | 260 | °C | Limit profile, 10 s, 2 reflow cycles max | 9 | |||
| Soldering iron tip temperature | 350 | °C | Rework with soldering iron; tip temperature 350°C max, output 80 W max, soldering time 3 s (+1, -0), 2 times | 10 |
CAD (KiCad official)
- Symbol:
LQP03TG2N4B02D - Footprint:
Inductor_SMD:L_0201_0603Metric - 3D model: 0201 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (12 pp, sha256
a44c6cc1c5c095a7, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).