Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LDLN025M45R

STMicroelectronics · Linear Voltage Regulators (LDO) · SOT-23-5L

LDLN025M45R from STMicroelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in LDO supply voltage; operating input range is 1.5 V to 5.5 V, with an absolute maximum of -0.3 to 7 V.
2 GND power_in Ground connection for the LDO.
3 EN input Enable input: VEN high (VIH min 1.2 V) turns the device on and VEN low (VIL max 0.4 V) turns it off; the pin is internally pulled down via 1 MΩ and its absolute maximum is -0.3 to VIN +0.3 V.
4 NC unconnected Not internally connected; can be connected to GND.
5 VOUT power_out LDO output voltage; delivers up to 250 mA, with output voltage accuracy of ±2% for VOUT ≥ 1.8 V across line, load and temperature (-40 °C to 125 °C junction).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5L
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage range VIN 1.5 5.5 V 6
Output voltage accuracy (DFN and SOT23 packages) VOUT -2 2 % VOUT + 1 V < VIN < 5.5 V, 1 mA < IOUT < 0.25 A, VOUT ≥ 1.8 V, -40 °C < TJ < 125 °C 6
Line transient -1 1 mV ΔVIN = +/- 0.6 V, trise = tfall = 30 μs 6
Load transient -40 40 mV ΔIOUT = 1 mA to 250 mA and back, trise = tfall = 10 μs 6
Shutdown current 0.2 1 µA VEN = 0 V 7
Short-circuit current ISC 250 500 mA VOUT = 0 V 7
Turn-on time tON 80 150 µs From VEN > VIH to VOUT = 95 % of VOUT(nom) 7
Input capacitance (stability) CIN 0.7 1 μF Stability 7
Output capacitance (stability) COUT 0.7 1 10 μF Stability 7
Output/input capacitor ESR ESR 5 500 mΩ 7
Input supply voltage (absolute maximum) VIN -0.3 7 V 5
Output voltage (absolute maximum) VOUT -0.3 V Upper limit printed as VIN +0.3 V 5
Enable pin voltage (absolute maximum) EN -0.3 V Upper limit printed as VIN +0.3 V 5
ESD charge device model -1000 1000 V Charge device model 5
ESD human body model -2000 2000 V Human body model 5
Operating junction temperature TJ-OP -40 125 °C 5
Maximum junction temperature TJ-MAX 150 °C 5
Storage temperature TSTG -55 150 °C 5
Thermal resistance, junction-to-ambient Rthja 200 °C/W SOT23-5L package 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LDLN025M45R
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L, generated on the KiCad land (body 1.6 x 2.95 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ldln025m45r-etched.step / ldln025m45r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ldln025m45r.step / ldln025m45r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (27 pp, sha256 b71eeee4c541f04a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF