Generated by kicad-footprint-generator · KiCad file format 20260206
LDLN025M45R
STMicroelectronics · Linear Voltage Regulators (LDO) · SOT-23-5L
LDLN025M45R from STMicroelectronics, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | LDO supply voltage; operating input range is 1.5 V to 5.5 V, with an absolute maximum of -0.3 to 7 V. |
| 2 | GND | power_in | Ground connection for the LDO. |
| 3 | EN | input | Enable input: VEN high (VIH min 1.2 V) turns the device on and VEN low (VIL max 0.4 V) turns it off; the pin is internally pulled down via 1 MΩ and its absolute maximum is -0.3 to VIN +0.3 V. |
| 4 | NC | unconnected | Not internally connected; can be connected to GND. |
| 5 | VOUT | power_out | LDO output voltage; delivers up to 250 mA, with output voltage accuracy of ±2% for VOUT ≥ 1.8 V across line, load and temperature (-40 °C to 125 °C junction). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5L |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage range | VIN | 1.5 | 5.5 | V | 6 | ||
| Output voltage accuracy (DFN and SOT23 packages) | VOUT | -2 | 2 | % | VOUT + 1 V < VIN < 5.5 V, 1 mA < IOUT < 0.25 A, VOUT ≥ 1.8 V, -40 °C < TJ < 125 °C | 6 | |
| Line transient | -1 | 1 | mV | ΔVIN = +/- 0.6 V, trise = tfall = 30 μs | 6 | ||
| Load transient | -40 | 40 | mV | ΔIOUT = 1 mA to 250 mA and back, trise = tfall = 10 μs | 6 | ||
| Shutdown current | 0.2 | 1 | µA | VEN = 0 V | 7 | ||
| Short-circuit current | ISC | 250 | 500 | mA | VOUT = 0 V | 7 | |
| Turn-on time | tON | 80 | 150 | µs | From VEN > VIH to VOUT = 95 % of VOUT(nom) | 7 | |
| Input capacitance (stability) | CIN | 0.7 | 1 | μF | Stability | 7 | |
| Output capacitance (stability) | COUT | 0.7 | 1 | 10 | μF | Stability | 7 |
| Output/input capacitor ESR | ESR | 5 | 500 | mΩ | 7 | ||
| Input supply voltage (absolute maximum) | VIN | -0.3 | 7 | V | 5 | ||
| Output voltage (absolute maximum) | VOUT | -0.3 | V | Upper limit printed as VIN +0.3 V | 5 | ||
| Enable pin voltage (absolute maximum) | EN | -0.3 | V | Upper limit printed as VIN +0.3 V | 5 | ||
| ESD charge device model | -1000 | 1000 | V | Charge device model | 5 | ||
| ESD human body model | -2000 | 2000 | V | Human body model | 5 | ||
| Operating junction temperature | TJ-OP | -40 | 125 | °C | 5 | ||
| Maximum junction temperature | TJ-MAX | 150 | °C | 5 | |||
| Storage temperature | TSTG | -55 | 150 | °C | 5 | ||
| Thermal resistance, junction-to-ambient | Rthja | 200 | °C/W | SOT23-5L package | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LDLN025M45R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L, generated on the KiCad land (body 1.6 x 2.95 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ldln025m45r-etched.step/ldln025m45r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ldln025m45r.step/ldln025m45r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (27 pp, sha256
b71eeee4c541f04a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).