Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP79522-I

Microchip Tech · Real-time Clocks (RTC) · MSOP-10

MCP79522-I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 X1 input Crystal oscillator input for an external 32.768 kHz crystal (optimized for 6-9 pF load) and also the external clock input when EXTOSC is set.
2 X2 output Crystal oscillator output for the external 32.768 kHz crystal; leave floating when using an external clock on X1.
3 VBAT power_in Backup supply input (1.3V to 3.6V) that maintains the RTCC and SRAM when VCC is unavailable; connect to VSS if battery backup is unused, and apply VCC before VBAT.
4 CS input Active-low chip select input; a high level deselects the device and puts SO in high impedance, and a high-to-low transition is required after power-up before any sequence.
5 VSS power_in Ground.
6 SI input Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK.
7 SO tri_state Serial data output shifted out after the falling edge of SCK, high impedance when the device is deselected.
8 SCK input Serial clock input that synchronizes SPI communication, latching SI on the rising edge and updating SO after the falling edge.
9 MFP output Multifunction pin shared by clock output and alarms; requires an external pull-up to VCC or VBAT and has a maximum sink current of 10 mA.
10 VCC power_in Primary power supply input, operating range 1.8V to 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category RTC/Clock Chip
Pins 10

CAD (KiCad official)

  • Symbol: MCP79522-I
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp79522-i-etched.step / mcp79522-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp79522-i.step / mcp79522-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 1caaeadd97693b59, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF