Generated by kicad-footprint-generator · KiCad file format 20260206
MCP79522-I
Microchip Tech · Real-time Clocks (RTC) · MSOP-10
MCP79522-I from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | X1 | input | Crystal oscillator input for an external 32.768 kHz crystal (optimized for 6-9 pF load) and also the external clock input when EXTOSC is set. |
| 2 | X2 | output | Crystal oscillator output for the external 32.768 kHz crystal; leave floating when using an external clock on X1. |
| 3 | VBAT | power_in | Backup supply input (1.3V to 3.6V) that maintains the RTCC and SRAM when VCC is unavailable; connect to VSS if battery backup is unused, and apply VCC before VBAT. |
| 4 | CS | input | Active-low chip select input; a high level deselects the device and puts SO in high impedance, and a high-to-low transition is required after power-up before any sequence. |
| 5 | VSS | power_in | Ground. |
| 6 | SI | input | Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK. |
| 7 | SO | tri_state | Serial data output shifted out after the falling edge of SCK, high impedance when the device is deselected. |
| 8 | SCK | input | Serial clock input that synchronizes SPI communication, latching SI on the rising edge and updating SO after the falling edge. |
| 9 | MFP | output | Multifunction pin shared by clock output and alarms; requires an external pull-up to VCC or VBAT and has a maximum sink current of 10 mA. |
| 10 | VCC | power_in | Primary power supply input, operating range 1.8V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-10 |
| Category | RTC/Clock Chip |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
MCP79522-I - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
mcp79522-i-etched.step/mcp79522-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp79522-i.step/mcp79522-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (58 pp, sha256
1caaeadd97693b59, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).