Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP1014AP065G

onsemi · AC-DC Controllers & Regulators · PDIP-7

NCP1014AP065G from onsemi, in a PDIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Powers the internal circuitry from an external capacitor of typically 10 µF, with a supply limit of -0.3 to 10 V on all pins except Pin 5 (Drain) and an active shunt clamp at 8.7 V typical that serves as opto fail-safe protection.
2 NC unconnected No internal connection on the PDIP-7 package.
3 GND power_in The IC ground.
4 FB input Feedback signal input; an optocoupler connected to this pin sets the peak current setpoint according to the output power demand.
5 Drain passive Internal drain connection of the 700 V MOSFET, with a drain voltage rating of -0.3 to 700 V.
7 GND power_in The IC ground.
8 GND power_in The IC ground.

Key specifications

Parameter Value
Manufacturer onsemi
Package PDIP-7
Category Power Management ICs
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage on all pins, except Pin 5 (Drain) VCC -0.3 10 V 4
Drain Voltage -0.3 700 V 4
Drain Current Peak during Transformer Saturation, NCP1012/13/14 IDS(pk) 1 A NCP1012/13/14 4
Maximum Current into Pin 1 when Activating the 8.7 V Active Clamp I_VCC 15 mA 4
ESD Capability, Human Body Model (All pins except HV) 2 kV 4
ESD Capability, Machine Model 200 V 4
Maximum Junction Temperature TJmax 150 °C 4
Storage Temperature Range -60 150 °C 4
VCC Increasing Level at which the Current Source Turns-off VCCOFF 7.9 8.5 9.1 V TJ -40 to +125°C, VCC 8.0 V (table header) 4
VCC Decreasing Level at which the Current Source Turns-on VCCON 6.9 7.5 8.1 V TJ -40 to +125°C, VCC 8.0 V (table header) 4
Hysteresis between VCCOFF and VCCON 1 V TJ -40 to +125°C, VCC 8.0 V (table header) 4
VCC Decreasing Level at which the Latch-off Phase Ends VCClatch 4.4 4.7 5.1 V TJ -40 to +125°C, VCC 8.0 V (table header) 4
Internal IC Consumption, MOSFET Switching at 65 kHz ICC1 0.92 1.1 mA MOSFET switching at 65 kHz (Note 2) 4
Active Zener Voltage Positive Offset to VCCOFF Vclamp 140 200 300 mV TJ -40 to +125°C (table header) 4
Latch-off Current, NCP1012/13/14 ILatch 6.3 7.4 9.2 mA NCP1012/13/14, 0°C < TJ < 125°C 4
Latch-off Current, NCP1012/13/14 ILatch 5.8 7.4 9.2 mA NCP1012/13/14, -40°C < TJ < 125°C 4
Power Switch On-state Resistance, NCP1012/13/14 (Id = 50 mA) RDSon 11 19 Ω Id = 50 mA, TJ = 25°C 4
Power Switch On-state Resistance, NCP1012/13/14 (Id = 50 mA) RDSon 22 38 Ω Id = 50 mA, TJ = 125°C 4
Power Switch Circuit and Startup Breakdown Voltage BVdss 700 V ID(off) = 120 µA, TJ = 25°C 5
Power Switch and Startup Breakdown Voltage Off-state Leakage Current IDS(OFF) 120 µA TJ = -40°C, Vds = 650 V 5
Turn-on Time (90%-10%) ton 20 ns RL = 50 Ω, Vds set for Idrain = 0.7 x Ilim 5
High-voltage Current Source, VCC = 8.0 V, NCP1012/13/14 IC1 5 8 10 mA VCC = 8.0 V, NCP1012/13/14, 0°C < TJ < 125°C 5
High-voltage Current Source, VCC = 8.0 V, NCP1012/13/14 IC1 5 8 11 mA VCC = 8.0 V, NCP1012/13/14, -40°C < TJ < 125°C 5
Maximum Internal Current Setpoint, NCP1014 (Note 3) Ipeak (11) 405 450 495 mA TJ = 25°C, Note 3 5
Oscillation Frequency, 65 kHz Version (Note 4) fOSC 59 65 71 kHz 65 kHz version, TJ = 25°C, Note 4 5
Maximum Duty-cycle Dmax 62 67 72 % 5
Temperature Shutdown TSD 140 150 160 °C 5
Junction-to-Lead, P Suffix, Case 626A (PDIP-7) RJL 9 °C/W Junction-to-lead 4
Junction-to-Air, P Suffix, Case 626A (PDIP-7) RJA 77 °C/W Junction-to-air, 2.0 oz (70 µm) copper, 0.36 sq in (2.32 sq cm) PCB copper 4
Junction-to-Air, P Suffix, Case 626A (PDIP-7) RJA 60 °C/W Junction-to-air, 2.0 oz (70 µm) copper, 1.0 sq in (6.45 sq cm) PCB copper 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Junction−to−Lead Junction−to−Air, 2.0 oz (70 m) Printed Circuit Copper Clad 4

CAD (KiCad official)

  • Symbol: NCP1014AP065G
  • Footprint: Package_DIP:DIP-8-N6_W7.62mm
  • 3D model: PDIP-7 (KiCad packages3D, STEP)
  • 3D model files: ncp1014ap065g-etched.step / ncp1014ap065g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1014ap065g.step / ncp1014ap065g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (23 pp, sha256 b32ef71c41bb2257, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF