component
NCP1014AP065G
Public Made by Adomby adom
onsemi AC-DC Controllers & Regulators, PDIP-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
NCP1014AP065G
onsemi · AC-DC Controllers & Regulators · PDIP-7
NCP1014AP065G from onsemi, in a PDIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Powers the internal circuitry from an external capacitor of typically 10 µF, with a supply limit of -0.3 to 10 V on all pins except Pin 5 (Drain) and an active shunt clamp at 8.7 V typical that serves as opto fail-safe protection. |
| 2 | NC | unconnected | No internal connection on the PDIP-7 package. |
| 3 | GND | power_in | The IC ground. |
| 4 | FB | input | Feedback signal input; an optocoupler connected to this pin sets the peak current setpoint according to the output power demand. |
| 5 | Drain | passive | Internal drain connection of the 700 V MOSFET, with a drain voltage rating of -0.3 to 700 V. |
| 7 | GND | power_in | The IC ground. |
| 8 | GND | power_in | The IC ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | PDIP-7 |
| Category | Power Management ICs |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage on all pins, except Pin 5 (Drain) | VCC | -0.3 | 10 | V | 4 | ||
| Drain Voltage | -0.3 | 700 | V | 4 | |||
| Drain Current Peak during Transformer Saturation, NCP1012/13/14 | IDS(pk) | 1 | A | NCP1012/13/14 | 4 | ||
| Maximum Current into Pin 1 when Activating the 8.7 V Active Clamp | I_VCC | 15 | mA | 4 | |||
| ESD Capability, Human Body Model (All pins except HV) | 2 | kV | 4 | ||||
| ESD Capability, Machine Model | 200 | V | 4 | ||||
| Maximum Junction Temperature | TJmax | 150 | °C | 4 | |||
| Storage Temperature Range | -60 | 150 | °C | 4 | |||
| VCC Increasing Level at which the Current Source Turns-off | VCCOFF | 7.9 | 8.5 | 9.1 | V | TJ -40 to +125°C, VCC 8.0 V (table header) | 4 |
| VCC Decreasing Level at which the Current Source Turns-on | VCCON | 6.9 | 7.5 | 8.1 | V | TJ -40 to +125°C, VCC 8.0 V (table header) | 4 |
| Hysteresis between VCCOFF and VCCON | 1 | V | TJ -40 to +125°C, VCC 8.0 V (table header) | 4 | |||
| VCC Decreasing Level at which the Latch-off Phase Ends | VCClatch | 4.4 | 4.7 | 5.1 | V | TJ -40 to +125°C, VCC 8.0 V (table header) | 4 |
| Internal IC Consumption, MOSFET Switching at 65 kHz | ICC1 | 0.92 | 1.1 | mA | MOSFET switching at 65 kHz (Note 2) | 4 | |
| Active Zener Voltage Positive Offset to VCCOFF | Vclamp | 140 | 200 | 300 | mV | TJ -40 to +125°C (table header) | 4 |
| Latch-off Current, NCP1012/13/14 | ILatch | 6.3 | 7.4 | 9.2 | mA | NCP1012/13/14, 0°C < TJ < 125°C | 4 |
| Latch-off Current, NCP1012/13/14 | ILatch | 5.8 | 7.4 | 9.2 | mA | NCP1012/13/14, -40°C < TJ < 125°C | 4 |
| Power Switch On-state Resistance, NCP1012/13/14 (Id = 50 mA) | RDSon | 11 | 19 | Ω | Id = 50 mA, TJ = 25°C | 4 | |
| Power Switch On-state Resistance, NCP1012/13/14 (Id = 50 mA) | RDSon | 22 | 38 | Ω | Id = 50 mA, TJ = 125°C | 4 | |
| Power Switch Circuit and Startup Breakdown Voltage | BVdss | 700 | V | ID(off) = 120 µA, TJ = 25°C | 5 | ||
| Power Switch and Startup Breakdown Voltage Off-state Leakage Current | IDS(OFF) | 120 | µA | TJ = -40°C, Vds = 650 V | 5 | ||
| Turn-on Time (90%-10%) | ton | 20 | ns | RL = 50 Ω, Vds set for Idrain = 0.7 x Ilim | 5 | ||
| High-voltage Current Source, VCC = 8.0 V, NCP1012/13/14 | IC1 | 5 | 8 | 10 | mA | VCC = 8.0 V, NCP1012/13/14, 0°C < TJ < 125°C | 5 |
| High-voltage Current Source, VCC = 8.0 V, NCP1012/13/14 | IC1 | 5 | 8 | 11 | mA | VCC = 8.0 V, NCP1012/13/14, -40°C < TJ < 125°C | 5 |
| Maximum Internal Current Setpoint, NCP1014 (Note 3) | Ipeak (11) | 405 | 450 | 495 | mA | TJ = 25°C, Note 3 | 5 |
| Oscillation Frequency, 65 kHz Version (Note 4) | fOSC | 59 | 65 | 71 | kHz | 65 kHz version, TJ = 25°C, Note 4 | 5 |
| Maximum Duty-cycle | Dmax | 62 | 67 | 72 | % | 5 | |
| Temperature Shutdown | TSD | 140 | 150 | 160 | °C | 5 | |
| Junction-to-Lead, P Suffix, Case 626A (PDIP-7) | RJL | 9 | °C/W | Junction-to-lead | 4 | ||
| Junction-to-Air, P Suffix, Case 626A (PDIP-7) | RJA | 77 | °C/W | Junction-to-air, 2.0 oz (70 µm) copper, 0.36 sq in (2.32 sq cm) PCB copper | 4 | ||
| Junction-to-Air, P Suffix, Case 626A (PDIP-7) | RJA | 60 | °C/W | Junction-to-air, 2.0 oz (70 µm) copper, 1.0 sq in (6.45 sq cm) PCB copper | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | Junction−to−Lead Junction−to−Air, 2.0 oz (70 m) Printed Circuit Copper Clad | 4 |
CAD (KiCad official)
- Symbol:
NCP1014AP065G - Footprint:
Package_DIP:DIP-8-N6_W7.62mm - 3D model: PDIP-7 (KiCad packages3D, STEP)
- 3D model files:
ncp1014ap065g-etched.step/ncp1014ap065g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1014ap065g.step/ncp1014ap065g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (23 pp, sha256
b32ef71c41bb2257, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).