component
EL814
Public Made by Adomby adom
Everlight Elec Transistor, Photovoltaic Output Optoisolators, DIP-4. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownEL814
Everlight Elec · Transistor, Photovoltaic Output Optoisolators · DIP-4
EL814 from Everlight Elec, in a DIP-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Anode / Cathode | input | One terminal of the two infrared emitting diodes connected in inverse parallel, which the datasheet rates at a forward current of ±60 mA (peak 1 A for 10 µs). |
| 2 | Cathode / Anode | input | The other terminal of the inverse-parallel infrared emitting diode pair, rated with the same ±60 mA forward current limit (peak 1 A for 10 µs). |
| 3 | Emitter | passive | Emitter of the optically coupled phototransistor output, with an emitter-collector breakdown voltage (VECO) rating of 6 V. |
| 4 | Collector | passive | Collector of the optically coupled phototransistor output, with a collector-emitter voltage (VCEO) rating of 80 V and a collector power dissipation of 150 mW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Everlight Elec |
| Package | DIP-4 |
| Category | Optoisolators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Forward voltage | VF | 1.2 | 1.4 | V | IF = ± 20mA | 3 | |
| Input capacitance | Cin | 50 | 250 | pF | V = 0, f = 1KHz | 3 | |
| Collector-Emitter dark current | ICEO | 100 | nA | VCE = 20V, IF = 0mA | 3 | ||
| Collector-Emitter breakdown voltage | BVCEO | 80 | V | IC = 0.1mA | 3 | ||
| Emitter-Collector breakdown voltage | BVECO | 6 | V | IE = 0.1mA | 3 | ||
| Current transfer ratio (EL814) | CTR | 20 | 300 | % | IF = ±1mA, VCE = 5V | 3 | |
| CTR symmetry | 0.7 | 1.3 | IF = ±1mA, VCE = 5V | 3 | |||
| Collector-emitter saturation voltage | VCE(sat) | 0.05 | 0.2 | V | IF = ±20mA, Ic = 1mA | 3 | |
| Floating capacitance | CIO | 0.6 | 1 | pF | VIO = 0, f = 1MHz | 3 | |
| Rise time | Tr | 18 | µs | VCE = 2V, IC = 2mA, RL = 100 | 3 | ||
| Fall time | Tf | 18 | µs | VCE = 2V, IC = 2mA, RL = 100 | 3 | ||
| Forward current | IF | -60 | 60 | mA | 2 | ||
| Peak forward current | IFM | 1 | A | t = 10µs | 2 | ||
| Input power dissipation | PD | 100 | mW | 2 | |||
| Output power dissipation | PC | 150 | mW | 2 | |||
| Collector-Emitter voltage | VCEO | 80 | V | 2 | |||
| Emitter-Collector voltage | VECO | 6 | V | 2 | |||
| Total power dissipation | PTOT | 200 | mW | 2 | |||
| Isolation voltage | VISO | 5000 | V rms | AC for 1 minute, R.H. = 40~60% R.H.; pins 1,2 shorted and pins 3,4 shorted | 2 | ||
| Operating temperature | TOPR | -55 | 110 | °C | 2 | ||
| Storage temperature | TSTG | -55 | 125 | °C | 2 | ||
| Soldering temperature | TSOL | 260 | °C | For 10 seconds | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Notes Reference: IPC/JEDEC J-STD-020D | 12 |
CAD (KiCad official)
- Symbol:
EL814 - Footprint:
Package_DIP:DIP-4_W7.62mm - 3D model: DIP-4 (KiCad packages3D, STEP)
- 3D model files:
el814-etched.step/el814-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);el814.step/el814.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Everlight Elec datasheet (13 pp, sha256
5a3e049befbbaf5f, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).